Urbanization and Industrialization during the last few decades have increased air pollution causing harm to human health. Air pollution in metro cities turns out to be a serious environmental problem, especially in developing countries like India. The major environmental challenge is, to predict accurate air quality from pollutants. Envisaging air quality from pollutants like PM2.5, using the latest deep learning technique (LSTM timer series) has turned out to be a significant research area. The primary goal of this research paper is to forecast near-time pollution using the LSTM time series multivariate regression technique. The air quality data from Central Pollution Control Board over Hyderabad station has been used for the present study. All the processing is done in real-time and the system is found to be functionally very stable and works under all conditions. The Root Mean Square Error (RMSE) and R2 have been used as evaluation criteria for this regression technique. Further, the time series regression has been used to find the best fit model in terms of processing time to get the lowest error rate. The statistical model based on machine learning established a relevant prediction of PM2.5 concentrations from meteorological data.

Air quality is closely related to quality of life. Air pollution forecasting plays a vital role in air pollution warnings and controlling. However, it is difficult to attain accurate forecasts for air pollution indexes because the original data are non-stationary and chaotic. The existing forecasting methods, such as multiple linear models, autoregressive integrated moving average (ARIMA) and support vector regression (SVR), cannot fully capture the information from series of pollution indexes. Therefore, new effective techniques need to be proposed to forecast air pollution indexes. The main purpose of this research is to develop effective forecasting models for regional air quality indexes (AQI) to address the problems above and enhance forecasting accuracy. Therefore, two hybrid models (EMD-SVR-Hybrid and EMD-IMFs-Hybrid) are proposed to forecast AQI data. The main steps of the EMD-SVR-Hybrid model are as follows: the data preprocessing technique EMD (empirical mode decomposition) is utilized to sift the original AQI data to obtain one group of smoother IMFs (intrinsic mode functions) and a noise series, where the IMFs contain the important information (level, fluctuations and others) from the original AQI series. LS-SVR is applied to forecast the sum of the IMFs, and then, S-ARIMA (seasonal ARIMA) is employed to forecast the residual sequence of LS-SVR. In addition, EMD-IMFs-Hybrid first separately forecasts the IMFs via statistical models and sums the forecasting results of the IMFs as EMD-IMFs. Then, S-ARIMA is employed to forecast the residuals of EMD-IMFs. To certify the proposed hybrid model, AQI data from June 2014 to August 2015 collected from Xingtai in China are utilized as a test case to investigate the empirical research. In terms of some of the forecasting assessment measures, the AQI forecasting results of Xingtai show that the two proposed hybrid models are superior to ARIMA, SVR, GRNN, EMD-GRNN, Wavelet-GRNN and Wavelet-SVR. Therefore, the proposed hybrid models can be used as effective and simple tools for air pollution forecasting and warning as well as for management.

Poor air quality is becoming a critical environmental concern in different countries over the last several years. Most of the air pollutants have serious consequences on human health and wellbeing. In this context, efficient forecasting of air pollutants is currently crucial to predict future events with a view to taking corrective actions and framing effective environmental policies. Although deep learning (DL) as well as statistical forecasting models are investigated in the literature, they have rarely used in air pollutant-specific optimal model building for long-term forecasting. In this paper, our aim is to develop the pollutant-specific optimal forecasting models for the phases spanning from preprocessing to model building by investigating a set of predictive techniques. In this regard, this paper presents a methodology for long-term forecasting of some important air pollutants. More specifically, a total of eight best performing models such as stacked LSTM, LSTM auto-encoder, Bi-LSTM, convLSTM, Holt-Winters, auto-regressive (AR), SARIMA, and Prophet are investigated for developing pollutant-specific optimal forecasting models. The study is carried out based on the real-world data obtained from government-run air quality monitoring units in Kolkata over a period of 4 years. The models such as Holt-Winters, Bi-LSTM, and ConvLSTM achieve high forecasting accuracy with respect to MAE and RMSE values for majority of the pollutants.

Urban population exposure to tropospheric ozone is a serious health concern in Europe countries. Although there are insufficient evidence to derive a level below which ozone has no effect on mortality WHO (World Health Organization) uses SOMO35 (sum of means over 35 ppb) in their health impact assessments. Is this paper, the artificial neural network (ANN) approach was used to forecast SOMO35 at the national level for a set of 24 European countries, mostly EU members. Available ozone precursors’ emissions, population and climate data for the period 2003–2013 were used as inputs. Trend analysis had been performed using the linear regression of SOMO35 over time, and it has demonstrated that majority of the studied countries have a decreasing trend of SOMO35 values.The created models have made majority of predictions (≈60%) with satisfactory accuracy (relative error <20%) on testing, while the best performing model had R² = 0.87 and overall relative error of 33.6%. The domain of applicability of the created models was analyzed using slope/mean ratio derivate from the trend analysis, which was successful in distinguishing countries with high from countries with low prediction errors. The overall relative error was reduced to <14%, after the pool of countries was reduced based on the abovementioned criterion.

After flooding, iron reduction in riverine wetlands may cause the release of large quantities of phosphorus. As phosphorus is an important nutrient causing eutrophication in aquatic systems, it is important to have a tool to predict this potential release. In this study we examined the P release to the soil pore water in soil cores from floodplains in the Netherlands and from less anthropogenically influenced floodplains from Poland. During the inundation experiment, concentrations of P in the pore water rose to 2–90 times the initial concentrations. P release was not directly related to the geographic origin of the soils. An important predictor variable of P release was found in the ratio between the concentration of iron-bound P and amorphous iron. This ratio may provide a practical tool for the selection of new areas for wetland creation, and for impact assessment of plans for riverine wetland restoration and floodwater storage. Mobilisation of phosphorus in floodplain wetland soils can be predicted with easily measurable soil characteristics.

Global climate change may have large impacts on water supplies, drought or flood frequencies and magnitudes in local and regional hydrologic systems. Water authorities therefore rely on computer models for quantitative impact prediction. In this study we present kernel-based learning machine river flow models for the Upper Gallego catchment of the Ebro basin. Different learning machines were calibrated using daily gauge data. The models posed two major challenges: (1) estimation of the rainfall-runoff transfer function from the available time series is complicated by anthropogenic regulation and mountainous terrain and (2) the river flow model is weak when only climate data are used, but additional antecedent flow data seemed to lead to delayed peak flow estimation. These types of models, together with the presented downscaled climate scenarios, can be used for climate change impact assessment in the Gallego, which is important for the future management of the system. Future climate change and data-based rainfall-runoff predictions are presented for the Upper Gallego.

The present study focuses on the application of stochastic modeling technique in analyzing the future trends of aerosol optical properties. For this, the Box–Jenkins ARIMA (Autoregressive Integrated Moving Average) model has been used for simulating the monthly average Aerosol Optical Depth (AOD550 nm) retrieved from Terra MODIS (Moderate Resolution Imaging Spectroradiometer) over New Delhi, the urban capital of India. The satellite dataset has been collected for a period of ten years from 2004 to 2014. The analysis of autocorrelation function indicates existence of seasonality in the AOD time series. Several seasonal ARIMA models have been generated and their validation has been verified by assessing various estimation parameters, using the Statistical Package for the Social Sciences (SPSS, version 20). After rigorous evaluation of the selected models, the ARIMA (1,0,0)x(0,1,2)12 is identified as the best fit model w.r.t. measures of goodness-of-fit like Stationary R-square (0.530), R-square (0.674), Root Mean Squared Error (0.128); Mean Absolute Error (0.095); Mean Absolute Percentage Error (16.942); and normalized Bayesian Information Criteria (−3.941). The selected models have been further used to forecast AOD values for the year 2014 at 95% level of confidence. However, the ARIMA (1,0,0)x(2,1,1)12 model is found to have minimum forecasting error, calculated as Mean Percentage Error (0.220). As the difference in BIC of both the models is minimal (0.046), so both the models have been considered as best fit models and utilized for prediction of AOD. Satisfactory results have been obtained using the selected ARIMA models, suggesting that a simplistic modeling technique for determining the future values of AOD is feasible.

This paper presents a high-resolution operational forecast system for providing support to oil spill response in Belfast Lough. The system comprises an operational oceanographic module coupled to an oil spill forecast module that is integrated in a user-friendly web application. The oceanographic module is based on Delft3D model which uses daily boundary conditions and meteorological forcing obtained from COPERNICUS and from the UK Meteorological Office. Downscaled currents and meteorological forecasts are used to provide short-term oil spill fate and trajectory predictions at local scales. Both components of the system are calibrated and validated with observational data, including ADCP data, sea level, temperature and salinity measurements and drifting buoys released in the study area. The transport model is calibrated using a novel methodology to obtain the model coefficients that optimize the numerical simulations. The results obtained show the good performance of the system and its capability for oil spill forecast.

A new approach towards the management of oil pollution accidents in marine sensitive areas is presented in this work. A set of nested models in a downscaling philosophy was implemented, externally forced by existing regional operational products. The 3D hydrodynamics, turbulence and the oil transport/weathering models are all linked in the same system, sharing the same code, exchanging information in real time and improving its ability to correctly reproduce the spill. A wind-generated wave model is also implemented using the same downscaling philosophy. Observations from several sources validated the numerical components of the system. The results obtained highlight the good performance of the system and its ability to be applied for oil spill forecasts in the region. The success of the methodology described in this paper was underline during the Costa Concordia accident, where a high resolution domain was rapidly created and deployed inside the system covering the accident site.