The resource intensive human activities (such as mining and extraction of mineral oils for betterment of life and modernization of society) have increased environmental pollution several folds. Products of mining and petrochemical industries are advantageous for the modern society. But waste generated such as BTEX from such industries are carcinogenic, toxic and causes adverse effects on environment and human health. These wastes are classified as hazardous waste which cannot be used further. Pollution of soil-water interface due to the release of hydrocarbons in environment is a major public health concern, and therefore, remediation of these pollutants is needed to reduce risk to human and environment. Various methods such as biological, chemical and physical method are used to degrade these pollutants from wastewater. In the present works photochemical degradation of toluene and benzene in wastewater are studied using activated Carbon−TiO2 composites as catalysts in the presence of UV irradiation in photochemical reactor. Composites are prepared by sol-gel method and further characterized by X-ray diffractometry (XRD), scanning electron microscope (SEM) and Fourier transformed-Infrared spectroscopy (FT-IR). The Photocatalytic efficiencies of the synthesized composites were determined by the mineralization of toluene and benzene under UV irradiation in photochemical reactor.

Multiwalled carbon nanotubes (MWCNTs) were oxidized using a mixture of H₂SO₄ and HNO₃, and the oxidized MWCNTS were decorated with magnetite (Fe₃O₄). Finally, poly-N-isopropyl acrylamide-co-butyl acrylate (P-NIPAM) was added to obtain P-NIPAM/Fe/MWCNT nanocomposites. The nanosorbents were characterized by various techniques, including X-ray diffraction, transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and Brunauer–Emmett–Teller analysis. The P-NIPAM/Fe/MWCNT nanocomposites exhibited increased surface hydrophobicity. Owing to their higher adsorption capacity, their kerosene removal efficiency was 95%; by contrast, the as-prepared, oxidized, and magnetite-decorated MWCNTs had removal efficiencies of 45%, 55%, and 68%, respectively. The P-NIPAM/Fe/MWCNT nanocomposites exhibited a sorbent capacity of 8.1 g/g for kerosene removal from water. The highest kerosene removal efficiency from water was obtained at a process time of 45 min, sorbent dose of 0.005 g, solution temperature of 40 °C, and pH 3.5. The P-NIPAM/Fe/MWCNTs showed excellent stability after four cycles of kerosene removal from water followed by regeneration. The reason may be the increase in the positive charge of the polymer at pH 3.5 and the increased adsorption affinity of the adsorbent toward the kerosene contaminant. The pseudo second-order model was found to be the most suitable model for studying the kinetics of the adsorption reaction.

Fly ash (FA), a solid waste generated in thermal power plants, is considered an environmental pollutant. Therefore, measures must be taken to dispose of FA in an environmentally friendly manner. In this paper, an electrospinning technique was employed to incorporate FA particles onto zinc oxide nanofibers (ZnO NFs), and the product (FA/ZnO composite) was used for the removal of methylene blue (MB) from the water. Herein, ZnO NFs may serve as effective semiconductor photocatalysts and provide sufficient surface area for FA, while the FA particles serve as an effective adsorbent. The adsorption capacity and photocatalytic efficiency of the as-synthesized nanocomposite fibers were enhanced compared to those of the pristine ZnO NFs, and this result is attributed to the uniform distribution of FA on the surface of the ZnO NFs. The as-synthesized nanocomposite could have great significance in wastewater treatment.

Almost 81% of nitrogen fertilizers are applied in form of urea but most of it is lost due to volatilization and leaching leading to environmental pollution. In this regard, slow-release nano fertilizers can be an effective solution. Here, we have synthesized different Fe₃O₄-urea nanocomposites with Fe₃O₄ NPs: urea ratio (1:1, 1:2, 1:3) ie. NC-1, 2, and 3 respectively, and checked their efficacy for growth and yield enhancement. Oryza sativa L. cv. Swarna seedlings were treated with different NCs for 14 days in hydroponic conditions and significant up-regulation of photosynthetic efficiency and nitrogen metabolism were observed due to increased availability of nitrogen and iron. The discriminant functional analysis confirmed that the NC3 treatment yielded the best results so further gene expression studies were performed for NC-3 treated seedlings. Significant changes in expression profiles of ammonia and nitrate transporters indicated that NC-3 treatment enhanced nitrogen utilization efficiency (NUE) due to sustained slow release of urea. From pot experiments, we found significant enhancement of growth, grain nutrient content, and NUE in NC supplemented sets. 1.45 fold increase in crop yield was achieved when 50% N was supplemented in form of NC-3 and the rest in form of ammonium nitrate. NC supplementation can also play a vital role in minimizing the use of bulk N fertilizers because, when 75% of the recommended N dose was supplied in form of NC-3, 1.18 fold yield enhancement was found. Thus our results highlight that, slow-release NC-3 can play a major role in increasing the NUE of rice.

Once released into the environment, engineered nanomaterials can significantly influence the transformation and fate of organic contaminants. To date, the abilities of composite nanomaterials to catalyze environmentally relevant abiotic transformation reactions of organic contaminants are largely unknown. Herein, we investigated the effects of two nanocomposites – consisting of anatase titanium dioxide (TiO2) with different predominantly exposed crystal facets (i.e., {101} or {001} facets) anchored to hydroxylated multi-walled carbon nanotubes (OH-MWCNT) – on the hydrolysis of 1,1,2,2-tetrachloroethane (TeCA), a common groundwater contaminant, at ambient pH (6, 7 and 8). Both OH-MWCNT/TiO2 nanocomposites were more effective in catalyzing the dehydrochlorination of TeCA than the respective component materials (i.e., bare OH-MWCNT and bare TiO2). Moreover, the synergistic effect of the two components was evident, in that the incorporation of OH-MWCNT increased the TeCA adsorption capacity of the nanocomposites, significantly enhancing the catalytic effect of the deprotonated hydroxyl and carboxyl groups on nanocomposite surfaces, which served as the main catalytic sites for TeCA hydrolysis. The findings may have important implications for the understanding of the environmental implications of composite nanomaterials and may shed light on the design of high-performance nanocomposites for enhanced contaminant removal.