Antimicrobial resistance (AMR) is a recognised threat to global health. Obtaining data on the prevalence of AMR in environmental bacteria is key to understanding drivers and routes of transmission. Here, 325 Shiga toxin negative deer faecal samples—gathered from across the Scottish mainland—were screened for the presence of AMR Escherichia coli and investigated for potential risk factors associated with AMR occurrence. E. coli with resistance to antimicrobials of clinical health concern, including carbapenems and 3rd generation cephalosporins, were targeted. Ninety-nine percent of samples yielded E. coli, and the prevalence of resistant E. coli at the level of faecal samples was 21.8% (n = 71) for tetracycline, 6.5% (n = 21) for cefpodoxime, 0.3% for ciprofloxacin (n = 1), with no recorded resistance to meropenem. Potential risk factors for tetracycline and cefpodoxime resistance were investigated. The presence of broadleaved woodlands was significantly associated with both AMR phenotypes, which may relate to land use within or around such woodlands. Associated risk factors varied across resistance phenotype and deer species, with proximity or density of horses an indicator of significantly decreased and increased risk, respectively, or tetracycline and cefpodoxime resistance in E. coli from roe deer, but not from red deer. Distance from wastewater treatment plants was a significant risk factor for tetracycline resistance in E. coli from red deer but not from roe deer. Data indicated that AMR E. coli can occur in wild deer populations that are not directly exposed to the selective pressure exerted by antimicrobial treatment. Overall, resistance to critically important antimicrobials was found to be low in the studied population, suggesting no immediate cause for concern regarding human health. Utilising existing culling frameworks, wild deer in Scotland could function well as a sentinel species for the surveillance of AMR in the Scottish environment.

Neonicotinoid insecticides (NNIs) had been detected in soil and surface water frequently because of extensive use worldwide, however, data regarding regional characteristics and potential influential factors of sediment were scarce. In the present study, eight NNIs were analyzed in 86 surface sediment samples from different regions (central cities, rural areas and suburbs) and land use types (construction land and crop land) in Jiangsu Province. NNIs were widespread in the sediments, with a mean value of 1.73 ± 0.89 ng g⁻¹ dry weight (dw) (ranged from 0.41 to 3.87 ng g⁻¹ dw). Imidaclothiz (IMIZ), dinotefuran (DIN) and nitenpyram (NIT) were the dominant compounds in the surface sediment, accounted for half of combined total. The results of regional distribution analysis show that NNIs were at higher concentrations in rural areas and crop land, while the residues of NNIs in lakes were more severe compare with rivers in Jiangsu Province. Region characteristics and land use types have an influence on residues of NNIs in surface sediment. Principal component analysis showed that residues of NNIs in surface sediment in Jiangsu Province mainly originated from protect grain crops (maize), fruit (apples, pears) and vegetables in agricultural systems. The residues of NNIs were found to be mostly concentrated in the northwest and northeast in Jiangsu Province, where were the area of intensive agriculture. To investigate the residues of NNIs, while identify the contributing factors, could provide a scientific basis for basic of region environment management and pollution control.

Microplastics debris in the marine environment have been widely studied across the globe. Within these particles, the most abundant and prevalent type in the oceans are anthropogenic microfibers (MFs), although they have been historically overlooked mostly due to methodological constraints. MFs are currently considered omnipresent in natural environments, however, contrary to the Northern Hemisphere, data on their abundance and distribution in Southern Oceans ecosystems are still scarce, in particular for sub-Antarctic regions. Using Niskin bottles we've explored microfibers abundance and distribution in the water column (3–2450 m depth) at the Burdwood Bank (BB), a seamount located at the southern extreme of the Patagonian shelf, in the Southwestern Atlantic Ocean. The MFs detected from filtered water samples were photographed and measured using ImageJ software, to estimate length, width, and the projected surface area of each particle. Our results indicate that small pieces of fibers are widespread in the water column at the BB (mean of 17.4 ± 12.6 MFs.L⁻¹), from which, 10.6 ± 5.3 MFs.L⁻¹ were at the surface (3–10 m depth), 20 ± 9 MFs.L⁻¹ in intermediate waters (41–97 m), 24.6 ± 17.3 MFs.L⁻¹ in deeper waters (102–164 m), and 9.2 ± 5.3 MFs.L⁻¹ within the slope break of the seamount. Approximately 76.1% of the MFs were composed of Polyethylene terephthalate, and the abundance was dominated by the size fraction from 0.1 to 0.3 mm of length. Given the high relative abundance of small and aged MFs, and the oceanographic complexity of the study area, we postulate that MFs are most likely transported to the BB via the Antarctic Circumpolar Current. Our findings imply that this sub-Antarctic protected ecosystem is highly exposed to microplastic pollution, and this threat could be spreading towards the highly productive waters, north of the study area.

Anthropogenic heat emission (AHE) is an important driver of urban heat islands (UHIs). Further, both urban thermal environment research and sustainable development planning require an efficient estimation of anthropogenic heat flux (AHF). Therefore, this study proposed an improved multi-source AHF model, which was constructed using diverse data sources and small-scale samples, to better represent the spatiotemporal distribution of AHF. The performances of three machine learning algorithms (Cubist, gradient boosting decision tree, and simple linear regression) were quantitatively evaluated, and the impact of spatiotemporal heterogeneity on AHF estimation was considered for the first time. The results showed that multi-source datasets and sophisticated algorithms could more effectively reduce the estimation error and improve the accuracy of the spatiotemporal distribution of AHF than simple linear regression. In practical applications, the Cubist model performed better, with prediction errors being less than 0.9 W⋅m−2. Further, the characteristics of different heat sources from the model outputs varied widely, and the building metabolic heat exhibited significant seasonal spatiotemporal variations, which were largely determined by the regional climate. In contrast, industrial and transportation heat showed marginal monthly fluctuations. Similarly, spatiotemporal heterogeneity significantly affected the estimation of building metabolic heat (0.62 W⋅m−2), but it did not affect other heat sources. The proposed improved AHF model was verified to effectively capture the spatiotemporal variations of building heat and solve the issue of overestimation of industrial heat in urban regions. This study provides new methods and ideas for the accurate spatiotemporal quantification of AHF that can supplement future studies on climate warming, UHI, and air pollution.

Heavy metal (loid)s (HMs) and polycyclic aromatic hydrocarbons (PAHs) in soils from a typical industrial county of Shanxi were synchronously measured to determine the spatial clustering of combined HMs and PAHs pollution, and the resulting source-specific health risks. The spatial interaction of HMs and PAHs was determined by the Moran's I index, and a bivariate local indicators of spatial association (LISA) analysis showed that the high HMs-high PAHs clusters were mainly distributed in Fencheng and Xijia towns, as well as the main urban areas of Xiangfen County. The spatial clusters of high naphthalene (Nap)-high HMs were more obvious than those of high benzo(a)pyrene (Bap)-high HMs. Based on positive matrix factorization (PMF), four sources were identified for both HMs and PAHs, with coal consumption and industrial emission identified as common sources of both pollutants. The source-oriented health risk was determined using an improved health risk assessment model. The cancer risk from the combined pollution industrial emissions was relatively serious for both adults and children, with the risk value exceeding 10⁻⁶. Therefore, special attention should be paid to emission control. Based on spatial clustering and source-specific health risk assessment, the largest risk areas and pollutant sources were in the main urban areas of Fencheng and Xijia towns. The spatial interaction patterns and source-specific HMs and PAHs pollution concentrations provide a basis for effective pollution management and control. Finally, a systematic framework for reference was proposed for risk area identification and analysis of the source-oriented health risks of combined HMs and PAHs pollution.

Biochar modification by metal/metal oxide is promising for improving its adsorption capability for contaminants, especially the anions. However, conventional chemical modifications are complicated and costly. In this study, novel Fe/Fe oxide loaded biochars (RMBCs) were synthesized from a one-step co-pyrolysis of red mud (RM) and shaddock peel (SP), and their potential application for removing anionic azo dye (acid orange 7, AO7) from the aqueous environment was evaluated. Fe from red mud was successfully loaded onto biochars pyrolyzed at 300–800 °C, which presented from oxidation form (Fe₂O₃) to the reduction forms (FeO and Fe⁰) with increasing pyrolysis temperature. The RMBC produced at 800 °C with RM:SP mass ratio of 1:1 (RMBC800₁:₁) exhibited the best capability for AO7 removal (∼32 mg/g), attributed to both adsorption and degradation. The higher surface area of RMBC800₁:₁ and its greater affinity for AO7 led to the higher adsorption. In addition, RMBC800₁:₁-induced degradation of AO7 was another key mechanism for AO7 removal. The reduction forms of Fe (FeO or Fe⁰) in RMBC800₁:₁ may provide electrons for breaking down the azo bond in AO7 molecules and result in degradation, which is further enhanced in acid conditions due to the participation of readily release of Fe²⁺ and the available H⁺ in AO7 degradation. Furthermore, RMBC800₁:₁ can be easily separated from the treated water by using magnetic field, which significantly benefits its separation in wastewater treatment.

Global change, including urbanisation, threatens many of the >1400 bat species. Nevertheless, certain areas within highly urbanised cities may be suitable to harbour bat populations. Thus, managing urban habitats could contribute to bat conservation. Here, we wanted to establish evidence-based recommendations on how to improve urban spaces for the protection of bats. In a team effort with >200 citizen scientists, we recorded bat vocalisations up to six times over the course of 2 years at each of 600 predefined sites in the Berlin metropolitan area. For each species we identified the preferred and non-preferred landscape features. Our results show that artificial light at night (ALAN) had a negative impact on all species. For soprano pipistrelles and mouse-eared bats ALAN had the largest effect sizes among all environmental predictors. Canopy cover and open water were especially important for bat species that forage along vegetation edges and for trawling bats, respectively. Occurrence probability of species foraging in open space decreased with increasing distance to water bodies. On a larger scale, impervious surfaces tended to have positive effects on some species that are specialised on foraging along edge structures. Our study constitutes an important contribution to the growing body of literature showing that despite the many negative impacts of urbanisation on wildlife, urban environments can harbour bat populations if certain conditions are met, such as access to vegetation and water bodies and low levels of ALAN. Our findings are of high relevance for urban planners and conservationists, as they allow inferences on how to manage urban spaces in a bat-friendly way. We recommend limiting ALAN to the minimum necessary and maintaining and creating uninterrupted vegetated corridors between areas with high levels of canopy cover and water bodies, in which ALAN should be entirely avoided.

Anthropogenic aquatic noise is recognised as an environmental pollutant with the potential to negatively affect marine organisms. Seismic surveys, used to explore subseafloor oil reserves, are a common source of aquatic noise that have garnered attention due to their intense low frequency inputs and their frequent spatial overlap with coastal fisheries. Commercially important Southern Rock Lobster (Jasus edwardsii) adults have previously shown sensitivity to signals from a single seismic air gun. Here, the sensitivity of J. edwardsii juveniles and puerulus to the signals of a full-scale seismic survey were evaluated to determine if early developmental stages were affected similarly to adults, and the range of impact. To quantify impact, lobster mortality rates, dorsoventral righting reflex and progression through moult cycle were evaluated following exposure. Exposure did not result in mortality in either developmental stage, however, air gun signals caused righting impairment to at least 500 m in lobsters sampled immediately following exposure, as had previously been reported in adults with corresponding sensory system damage following exposure. Impairment resulting from close range (0 m) exposure appeared to be persistent, as previously reported in adults, whereas juveniles exposed at a more distant range (500 m) showed recovery, indicating that exposure at a range of 500 m may not cause lasting impairment to righting. Intermoult duration was (time between moults) significantly increased in juveniles exposed at 0 m from the source, indicating the potential for slowed development, growth, and physiological stress. These results demonstrate that exposure to seismic air gun signals have the potential to negatively impact early life history stages of Southern Rock Lobsters. The similarity of both the impacts and the sound exposure levels observed here compared to previous exposure using a single air gun offer validation for the approach, which opens the potential for accessible field-based experimental work into the impact of seismic surveys on marine invertebrates.

Cadmium (Cd) and arsenic (As) are loaded into rice grain via two pathways: i) root uptake from the soil and then translocation to the grain, and ii) remobilization of Cd and As previously accumulated within the vegetative tissues to the grain. However, the relative contributions of the two pathways are not well understood in soil-grown rice plants. In this study, we used eight different water management regimes applied at different growth periods to manipulate the concentrations of Cd and As in porewater and then established a mathematical model to estimate the relative importance of the two pathways. Different water management regimes had dramatic and opposite effects on the solubility of Cd and As in soil, and their subsequent accumulation in both straw and grain. Water management applied at different growth periods had markedly different impacts on grain Cd and As concentrations. Water management during grain filling had a much greater impact on grain Cd than on grain As concentrations, whereas water treatment during the vegetative growth stage had a larger effect on grain As concentrations. Under the typical water management practice (i.e. flooding through the vegetative stage followed by drainage during grain filling), grain filling is the key period for the accumulation of Cd in the grain, with 98% of the grain Cd from root uptake during this period and the contribution of remobilization being very limited. In contrast, 95% of the grain As was remobilized from that accumulated within the plant prior to the grain filling, with the tillering, jointing, and heading period each contributing 20–40% of the grain As, whereas root uptake during grain filling contributed minor. These differences can be harnessed to design a segmented water management strategy to control grain Cd and As accumulation simultaneously.

The 2011 Tohoku earthquake-tsunami and the subsequent nuclear accident at the Fukushima Dai-ichi Nuclear Power Station (FDNPS) led to large-scale radionuclide contamination of the marine and freshwater environment. Monitoring studies of marine food products in the Fukushima region have generally demonstrated a declining trend in radiocaesium concentrations. However, the accumulation and elimination of radiocaesium and potential biological effects remain poorly understood for freshwater biota inhabiting highly contaminated areas at Fukushima. Consequently, the present study aimed to assess radiocaesium accumulation and developmental effects on the commercially important catadromous Japanese mitten crab, Eriocheir japonica. E. japonica were collected from four sites along a gradient of radionuclide contamination 4–44 km in distance from the FDNPS in 2017. To determine potential developmental effects, fluctuating asymmetry (FA) was used as a measure of developmental stability. Combined ¹³⁴Cs and ¹³⁷Cs values for whole E. japonica from highly contaminated sites 4 and 16 km in distance from the FDNPS were 3040 ± 521 and 2250 ± 908 Bq kg⁻¹ wet weight respectively, 30 and 22 times greater than the Japanese standard limit of 100 Bq kg⁻¹. Estimated total dose rates based on radiocaesium concentrations in whole crabs and sediment ranged from 0.016 to 37.7 μGy h⁻¹. No significant relationship between radiocaesium accumulation and FA was recorded, suggesting that chronic radiation exposure at Fukushima is not inducing developmental effects in E. japonica as measured using fluctuating asymmetry. Furthermore, estimated dose rates were below proposed regulatory limits where significant deleterious effects are expected. The present study will aid in the understanding of the long-term consequences of radiation exposure for non-human biota and the management of radioactively contaminated environments.