The vadose zone is the first natural layer preventing groundwater pollution. Understanding virus transport and retention in the vadose zone is necessary. The effects of different interfaces and mechanisms on virus transport and retention were investigated by studying Escherichia coli phage migration in laboratory-scale columns under unsaturated conditions. The E. coli phage was used as a model virus. Colloid filtration theory, extended Derjagin–Landau–Verwey–Overbeek theory and two−site kinetic deposition model were used to calculate fitted parameters and interaction energies to assess virus retention at different interfaces. The collector diameters and the size of E. coli phages in the influent and effluent were compared to assess the effect of straining. The results indicated that the roles of solid–water interfaces (SWIs) and air–water interfaces (AWIs) in retaining E. coli phages are strongly controlled by the moisture content and hydrochemical conditions. Decreasing the moisture content and increasing the ionic strength (IS) of the suspension increased E. coli phage retention. At suspension ISs of 0.01 or 0.03 M and various moisture contents, E. coli phages were mainly retained at the SWIs rather than AWIs. When the IS was increased to 0.06 M, the viruses were strongly retained by becoming attached to both SWIs and AWIs. The role of straining in virus retention could not be ignored. Viruses were retained more at the SWIs and less straining occurred under acidic conditions than under neutral or alkaline conditions. This was mainly because of the effects of the pH and IS on surface charges and the model virus particle size. This study has important implications for modeling and predicting virus transport in soil affected by rainfall, snowmelt, and human activities (e.g., irrigation and artificial groundwater recharging).

Due to rapid urbanization in China, lead (Pb) continues to accumulate in urban topsoil, resulting in soil degradation and increased public exposure. Mapping Pb concentrations in urban topsoil is therefore vital for the evaluation and control of this exposure risk. This study developed spatial models to map Pb concentrations in urban topsoil using proximal and remote sensing data. Proximal sensing reflectance spectra (350–2500 nm) of soils were pre-processed and used to calculate the principal components as landscape factors to represent the soil properties. Other landscape factors, including vegetation and land-use factors, were extracted from time-sequential Landsat images. Two hybrid statistical approaches, regression kriging (RK) and geographically weighted regression (GWR), were adopted to establish prediction models using the landscape factors. The results indicated that the use of landscape factors derived from combined remote and proximal sensing data improved the prediction of Pb concentrations compared with useing these data individually. GWR obtained better results than RK for predicting soil Pb concentration. Thus, joint proximal and remote sensing provides timely, easily accessible, and suitable data for extracting landscape factors.

Despite representing an extremely relevant portion (20–40%) of worldwide coastal litter, cigarette butts are still an underestimate environmental issue of limited scientific interest. Public authorities of different countries promote active removal of cigarette butts, but the issue remains problematic in terms of aesthetic, environmental and health-related impacts. There are few studies on the environmental side-effects of smoked cigarette butt litter despite being a worldwide issue. In this work, two ecotoxicological bioassay batteries were adopted to evaluate the environmental consequences of cigarette butt water-soluble ingredient release in both marine water and freshwater. Marine assays were generally more affected compared to freshwater. Interesting outcomes were observed with crustacean tests, showing a lower effect of smoked cigarette butt leachate when tested at maximum concentration. This finding were supported by heartbeat measures of Daphnia magna, which were accelerated at 100% of smoked cigarette butt leachate.

The oceans are increasingly polluted with plastic debris, and several studies have implicated plastic as a reservoir for antibiotic resistance genes and a potential vector for antibiotic-resistant bacteria. Bioplastic is widely regarded as an environmentally friendly replacement to conventional petroleum-based plastic, but the effects of bioplastic pollution on marine environments remain largely unknown. Here, we present the first evidence that bioplastic accumulates antibiotic resistance genes (ARGs) and metal resistance genes (MRGs) in marine sediments. Biofilms fouling ceramic, polyethylene terephthalate (PET), and polyhydroxyalkanoate (PHA) were investigated by shotgun metagenomic sequencing. Four ARG groups were more abundant in PHA: trimethoprim resistance (TMP), multidrug resistance (MDR), macrolide-lincosamide-streptogramin resistance (MLS), and polymyxin resistance (PMR). One MRG group was more abundant in PHA: multimetal resistance (MMR). The relative abundance of ARGs and MRGs were strongly correlated based on a Mantel test between the Bray-Curtis dissimilarity matrices (R = 0.97, p < 0.05) and a Pearson's analysis (R = 0.96, p < 0.05). ARGs were detected in more than 40% of the 57 metagenome-assembled genomes (MAGs) while MRGs were detected in more than 90% of the MAGs. Further investigation (e.g., culturing, genome sequencing, antibiotic susceptibility testing) revealed that PHA biofilms were colonized by hemolytic Bacillus cereus group bacteria that were resistant to beta-lactams, vancomycin, and bacitracin. Taken together, our findings indicate that bioplastic, like conventional petroleum-based plastic, is a reservoir for resistance genes and a potential vector for antibiotic-resistant bacteria in coastal marine sediments.

Plastic in the environment is considered an emerging pollutant of global concern. In spite of intensive research, many questions remain open, such as the processes that drive the deposition and remobilization of plastic debris on river beaches. The objectives of this study were: i) to analyze the influence of the natural hydrological fluctuations and wind intensity on the distribution of mesoplastic (0.5–2.5 cm) and macroplastic (>2.5 cm) debris in beach sediments of a large river, ii) to describe the type of plastic debris found and iii) to explore potential relations between the number of items and weight of macro- and mesoplastics. Our results suggest that, during lowering water levels, flow removes the plastic debris and transports it further downstream. Conversely, when the beach sediments remain exposed during long periods, the plastic debris accumulates considerably. Nevertheless, the influence of wind intensity on plastic debris transport was comparatively negligible. In other words, in our study the water flow had a greater capacity to remobilize and transport plastic debris than the wind. The most abundant mesoplastic items were foam, hard plastic, film and small fragments of fishing line. The dominant macroplastic items recorded were pieces of fishing line (nylon) and cigarette filters (cellulose acetate), typically discarded by beach users. Other items found in large quantities were soft packaging elements (expanded polystyrene), hard plastic containers (polystyrene, polyethylene terephthalate) and beverage bottles (polyethylene terephthalate), typical items of domestic use in the Paraná River region. Finally, we found that the density of macroplastic items is highly correlated to the density of mesoplastic items, serving as surrogate for further estimations. Our results could help to develop better mitigation strategies in seasonal riverscapes, based on the influence of the hydrological cycle and the characteristics of the most abundant meso- and macroplastics.

The frequency and duration of exposure to acrylamide (AA) from the environment and diet are associated with a range of adverse health effects. However, whether long-term AA exposure is related to diabetes mellitus (DM) remains unknown. Data from 3577 adults in the National Health and Nutrition Examination Survey (NHANES) 2005–2006 and 2013–2016 aged ≥ 20 years was analysed. The main analyses applied multivariate logistic regression and restricted cubic spline models to investigate the associations between DM and AA haemoglobin biomarkers, including haemoglobin adducts of acrylamide and glycidamide (HbAA and HbGA), the sum of HbAA and HbGA (HbAA + HbGA), and the ratio of HbGA to HbAA (HbGA/HbAA) levels. After multivariable adjustment, the odds ratios (95% confidence intervals) for DM comparing the highest with the lowest AA haemoglobin biomarker quartiles were 0.71 (0.55, 0.93), 0.92 (0.71, 1.18), 0.80 (0.62, 1.03) and 1.95 (1.51, 2.51) for HbAA, HbGA, HbAA + HbGA and HbGA/HbAA, respectively. The restricted cubic spline model demonstrated that HbAA was linearly and inversely associated with risk of DM (P for trend = 0.013), while HbGA/HbAA was nonlinearly and positively associated with the prevalence of DM (P for trend <0.001). These results support for epidemiological evidence that the HbAA and HbGA/HbAA are significantly associated with DM. Further studies are warranted to infer the causal role of AA exposure in the prevalence of DM.

Co-occurrence of pesticides and heavy metals has attracted extensive attention. The enantioselective behaviors of dinotefuran to aquatic organisms have not been reported, and the effects of cadmium (Cd) was absent, which were investigated in this study at environmentally relevant concentrations. The enantioselective accumulation and elimination of dinotefuran enantiomers were observed in zebrafish, and it had tissue specificity. The S-dinotefuran concentrations were higher than R-dinotefuran in heads and viscera, but it was opposite in muscles. There existed competition between S-dinotefuran and R-dinotefuran, and the existence of S-dinotefuran might decrease the accumulation and elimination of the R-dinotefuran in zebrafish. When co-exposure to Cd and dinotefuran, the accumulation concentrations of dinotefuran enantiomers increased in zebrafish at the initial stage, which were opposite latterly. The accumulation concentrations of R-dinotefuran in R + Cd treatment in fish were 3.4 times higher than those in R-dinotefuran treatment, and the enantiomer fraction (EF) values changed from 0.484 to 0.195. The oxidative stress of S-dinotefuran on zebrafish was highest, followed by rac- and R-dinotefuran. Co-exposure to Cd led to toxicity increase for R-dinotefuran, the malonaldehyde (MDA) content decreased significantly in R + Cd treatment during 7–28 days, while obvious declination of MDA contents was found on the 28th day in R-dinotefuran treatment. Furthermore, compared to R-dinotefuran treatment, Cd increased the relative expression of cz-sod (3.4 times), cas3 (1.6 times) and p53 (5.7 times) in R + Cd treatment. The co-exposure of Cd might alter the environmental behaviors and toxicity effects of dinotefuran enantiomers in zebrafish, including the enantioselectivity. The effects of Cd on accumulation and toxicity of R-dinotefuran were greater than those on S-dinotefuran. Thus, it is necessary to consider the effects of coexistent metals to chiral pesticides in ecological risk.The enantioselective accumulation and elimination of dinotefuran enantiomers had tissue specificity. Cd increased the accumulation and toxicity of R-dinotefuran in zebrafish.

To better understand the real-world emissions of rural vehicles (RVs) in China, 8 China II RVs and 18 China III RVs were tested on a provincial road, rural road and farm road using a portable emissions measurement system. The results are illustrated in contour maps of the speed, acceleration and emission rates and show that CO, HC, NOx and PM emissions differ for the three road types; however, the peak emission points all occur on the provincial road. The average CO, HC, NOx and PM emission factors based on distance for the China II RVs are 9.21, 4.05, 1.68 and 2.58 times higher, respectively, than those of the China III RVs. However, the average NOx emission factors of the China II and III RVs are 2.21 and 1.65 times higher than the corresponding recommended values of national emission inventory guideline, resulting in underestimation of overall RVs’ emissions. Distance-based emission factors of four pollutants ranked from high to low are farm road > rural road > provincial road. In contrast to the average emission factors of the China II RVs on the three road types, those of the China III RVs are significantly less in terms of distance and fuel consumption. The results of other researchers differ from those in this study: the CO emission factor of the China II RVs is 2.12 times higher than that of the China II light-duty diesel vehicles (LDDVs). The PM emission factor of the China III RVs is 2.67 times higher than that of the China III LDDVs. The NOx emission factors of the China II and III RVs are similar to those of the corresponding China II and III LDDVs. Our research increases the understanding of real-world emissions of RVs and can act as great references for policy makers developing RV emission baselines.

Global increase in demand for food supply has resulted in surplus generation of wastes. What was once considered wastes, has now become a resource. Studies were carried out on the conversion of biowastes into wealth using methods such as extraction, incineration and microbial intervention. Agro-industry biowastes are promising sources of carbon for microbial fermentation to be transformed into value-added products. In the era of circular economy, the goal is to establish an economic system which aims to eliminate waste and ensure continual use of resources in a close-loop cycle. Biowaste collection is technically and economically practicable, hence it serves as a renewable carbon feedstock. Biowastes are commonly biotransformed into value-added materials such as bioethanol, bioplastics, biofuels, biohydrogen, biobutanol and biogas. This review reveals the recent developments on microbial transformation of biowastes into biotechnologically important products. This approach addresses measures taken globally to valorize waste to achieve low carbon economy. The sustainable use of these renewable resources is a positive approach towards waste management and promoting circular economy.

Exposure of females to fine particulate matter ≤2.5 μm in diameter (PM2.5) prior to pregnancy could produce adverse impact on fertility and enhances susceptibility of the offspring to a variety of diseases. In the current study, female C57BL/6 mice (6 weeks of age) were exposed to either concentrated PM2.5 or filtered air (average PM2.5 concentration: 115.60 ± 7.77 vs. 14.07 ± 0.38 μg/m⁻³) using a whole-body exposure device for 12 weeks. Briefly, PM2.5 exposure decreased anti-Müllerian hormone level (613.40 ± 17.36 vs 759.30 ± 21.90 pg mL⁻¹, P＜0.01) and increased reactive oxygen species (ROS) level (45.39 ± 0.82 vs 24.20 ± 0.85 arbitrary unit in fluorescence assay, P＜0.01) in oocytes. The exposure increased oocyte degeneration rate (21.5% vs 5.1%, respectively (P＜0.01) and decreased the 2-cell formation rate (71.9% vs 86.0%, P < 0.01). Transcriptome profiling using RNA sequencing showed wide spectrum of abnormal expression of genes, particularly those involved in regulating the mitochondrial respiratory complex in oocytes and metabolic processes in blastocysts. The exposure decreased litter size (6 ± 0.37 vs 7 ± 0.26, P＜0.05) and weight (1.18 ± 0.02 vs 1.27 ± 0.02 g, P＜0.01). In summary, PM2.5 exposure decreased female fertility, possibly through increased ROS production in oocytes and metabolic disturbances in developing embryos. The cause-effect relationship, however, requires further investigation.