Design and Manufacture of a Dryer for Corn Grains, Ears and Cobs
2022
Humberto Rodríguez-Fuentes | Juan Arredondo-Valdez | Wilgince Apollon | Urbano Luna-Maldonado | Héctor Flores-Breceda | Uziel Francisco Grajeda-González | Alejandro Isabel Luna Maldonado
A corn dryer prototype was manufactured for Mexican small-scale farmers in order to avoid them paying fines for corn with a high-moisture content when selling their corn on to stores. The dryer comprised two large boxes perforated by round holes and containing stainless steel trays subjected to a hot air temperature of 45°C within the batch. The accumulated grain in both boxes was 200 mm and the airflow rate were 0.56 m3 s-1. The corn ears layer was of 80 mm of depth in each of the boxes. The airflow rate was 0.34 m3 s-1. Within eight hours, we sampled corn grain in nine points of each box and found that the mean corn grain moisture content was reduced from 30.36% to 10.47% for box 1 whereas for box 2 it was reduced until 14.72%. The fuel consumption for drying was 0.55 kg h-1 of kerosene. In Box1, the exponential regression model for corn grain moisture content had an R² of 0.9143 whereas Box 2 exponential regression model had an R² was of 0.6642. In Box 1, the exponential regression model for corn ear moisture content had an R² of 0.9616 whereas Box 2 had an R² was of 0.9400. Both models for corn cob moisture content had an R² of 0.9639. Two-layer corn dryers can be used to harness gas or fuel energy to speed up drying for storage.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил Directory of Open Access Journals
