Optimization of SO2 and NOx sequential wet absorption in a two-stage bioscrubber for elemental sulphur valorisation
2021
Guimerà, Xavier | Mora, Mabel | Dorado, Antonio David | Bonsfills, Anna | Gabriel, David | Gamisans, Xavier
Flue gases contain SO₂ and NOₓ that can be treated together for elemental sulphur recovery in bioscrubbers, a technology that couples physical-chemical and biological processes for gaseous emissions treatment in a more economic manner than classical absorption. Sequential wet absorption of SO₂ and NOₓ from flue gas is thoroughly studied in this work in a two-stage bioscrubber towards elemental sulphur valorisation pursuing reuse of biological process effluents as absorbents. The optimal operating conditions required for SO₂ and NOₓ absorption in two consecutive spray absorbers were defined using NaOH-based absorbents. Overall, removal efficiencies of 98.9% and 55.9% for SO₂ and NOₓ abatement were obtained in two in-series scrubbers operated under a gas contact time of 1 and 100 s, and a liquid-to-gas ratio of 7.5 and 15 L m⁻³, respectively. Higher NOₓ removal efficiency to clean gas emission was obtained by oxidants dosing in the absorber for NOₓ absorption. High NaHCO₃ concentration in a two-stage bioscrubber effluent was exploited as alkaline absorbent for flue gas treatment. The performance of scrubbers using an absorbent mimicking a reused effluent exhibited the same removal efficiencies than those observed using NaOH solutions. In addition, the reuse of bioprocess effluent reduced reagents’ consumption by a 63.7%. Thus, the two-stage bioscrubber proposed herein offers an environmentally friendly and economic alternative for flue gas treatment.
Показать больше [+] Меньше [-]Ключевые слова АГРОВОК
Библиографическая информация
Эту запись предоставил National Agricultural Library
