Уточнить поиск
Результаты 1-10 из 29
Analysis of physeal growth in dogs, using biplanar radiography.
1994
Conzemius M.G. | Smith G.K. | Brighton C.T. | Marion M.J. | Gregor T.P.
Biplanar radiography was used to study normal growth of the left and right radius in 5 Beagles and growth of the left radius alone in 15 additional Beagles. We explored the applicability of this radiographic method in veterinary medicine by measuring the contribution to total radius length from each growth plate. Spherical tantalum markers (0.5 mm) were embedded in the proximal epiphysis, diaphysis, and distal epiphysis of each dog's radius at 10 weeks of age. Simultaneous biplanar radiographic views were obtained every 4 weeks until skeletal maturity was documented. A three-dimensional coordinate system was constructed allowing for measurement of growth (in millimeters). Resolution of the measuring system was 0.074 mm. Mean +/- SEM length of the skeletally mature Beagle's radius, as measured from proximal epiphyseal bead to distal epiphyseal bead, was 95.33 +/- 1.07 mm. The percentage of contribution to the total radius length from the proximal and distal growth plates was 36.76 and 64.73%, respectively, with 95% confidence interval of 2.29%. The percentage of contribution to radius length from the distal radial growth plate increased for each consecutive time segment, with the distal radial physis contributing 61.75% from 10 to 14 weeks of age and increasing to 70.22% from 22 to 26 weeks of age. Significant growth was not observed after 26 weeks of age. The period of most rapid growth was between 10 and 14 weeks of age. Biplanar radiography was accurate and precise in quantifying the relative contribution of the proximal and distal growth plate to radius length in Beagles. The method is applicable in veterinary research or clinical medicine for monitoring of axial and angular growth: physiologic, iatrogenic, or pathologic.
Показать больше [+] Меньше [-]Somatosensory-evoked and spinal cord-evoked potentials in response to pudendal and tibial stimulation in cats.
1989
Sims M.H. | Selcer R.R.
Somatosensory-evoked potentials (SEP) and spinal cord-evoked potentials (SCEP) were recorded in clinically normal adult cats in response to electrical stimulation of pudendal and tibial nerves to provide normative data that can be used in a clinical evaluation of pudendal nerve function in cats after sacral or sacrococcygeal luxations or fractures. Responses to tibial nerve stimulation were included in the study as an internal control because it is usually not involved in these types of injuries and because its SEP and SCEP are easily recorded. Evoked potentials were characterized by the latencies (ms) of positive (P or p) and negative (N or n) peaks. The SEP resulting from percutaneous pudendal nerve stimulation consisted of a prominent P-N-P potential in the 30- to 80-ms range. The pudendal SCEP was not successfully recorded because of large muscle artifacts evoked from the sacral area. The tibial SEP was similar to the pudendal SEP, except that the prominent P-N-P series in the 35- to 81-ms range was preceded by a smaller p-n-p-n sequence in the 7- to 23-ms range. The tibial SCEP consisted of a P-N-P series in the 2- to 4-ms range.
Показать больше [+] Меньше [-]Somatosensory-evoked potential induced by stimulation of the caudal tibial nerve in awake and barbiturate-anesthetized sheep.
1986
Wilson R.D. | Beerwinkle K.R.
Effect of volume variations on osteogenic capabilities of autogenous cancellous bone graft in dogs.
1996
DeVries W.J. | Runyon C.L. | Martinez S.A. | Ireland W.P.
Effect of Pasteurella multocida toxin on physeal growth in young pigs.
1996
Ackermann M.R. | Register K.B. | Stabel J.R. | Gwaltney S.M. | Howe T.S. | Rimler R.B.
Mechanical symmetry of rabbit bones studied by bending and indentation testing.
1996
An Y.H. | Kang Q. | Friedman R.J.
Diaphyseal structural properties of equine long bones.
1995
Hanson P.D. | Markel M.D. | Vanderby R. Jr.
We evaluated the single-cycle structural properties for axial compression, torsion, and 4-point bending with a central load applied to the caudal or lateral surface of a diaphyseal segment from the normal adult equine humerus, radius, third metacarpal bone, femur, tibia, and third metatarsal bone. Stiffness values were determined from load-deformation curves for each bone and test mode. Compressive stiffness ranged from a low of 2,690 N/mm for the humerus to a high of 5,670 N/mm for the femur. Torsional stiffness ranged from 558 N.m/rad for the third metacarpal bone to 2,080 N.m/rad for the femur. Nondestructive 4-point bending stiffness ranged from 3,540 N.m/rad for the radius to 11,500 N.m/rad for the third metatarsal bone. For the humerus, radius, and tibia, there was no significant difference in stiffness between having the central load applied to the caudal or lateral surface. For the third metacarpal and metatarsal bones, stiffness was significantly (P < 0.05) greater with the central load applied to the lateral surface than the palmar or plantar surface. For the femur, bones were significantly (P < 0.05) stiffer with the central load applied to the caudal surface than the lateral surface. Four-point bending to failure load-deformation curves had a bilinear pattern in some instances, consisting of a linear region at lower bending moments that corresponded to stiffness values from the nondestructive tests and a second linear region at higher bending moments that had greater stiffness values. Stiffness values from the second linear region ranged from 4,420 N.m/rad for the humerus to 13,000 N.m/rad for the third metatarsal bone. Differences in stiffness between nondestructive tests and the second linear region of destructive tests were significant (P < 0.05) for the radius, third metacarpal bone, and third metatarsal bone. Difference between stiffness values of paired left and right bones was not detected for any test.
Показать больше [+] Меньше [-]Keratan sulfate as a marker of articular cartilage catabolism and joint treatment in ponies.
1993
Todhunter R.J. | Yeager A.E. | Freeman K.P. | Parente E.J. | Lust G.
Keratan sulfate (KS) is a glycosaminoglycan, distribution of which is confined mostly to hyaline cartilage. As such, it is a putative marker of hyaline cartilage catabolism. In experiment 1, a focal osteochondral defect was made arthroscopically in 1 radial carpal bone of 2 ponies, and in 2 other ponies, chymopapain was injected into the radiocarpal joint to induce cartilage catabolism. Sequential and concurrent plasma and synovial fluid concentrations of KS were measured, up to 13 months after induction of cartilage injury, to determine whether changes in KS concentrations reflected cartilage catabolism. In experiment 2, a large, bilateral osteochondral defect was made in the radial carpal bones of 18 ponies, which were subsequently given postoperative exercise and/or injected intra-articularly with 250 mg of polysulfated glycosaminoglycan (PSGAG). Medication was given at surgery, then weekly for 4 weeks. Blood samples were collected and synovial fluid was aspirated before surgery, when medication was given, and at postmortem examination (postoperative week 17). The KS concentration was measured in these fluids to determine whether changes in KS concentration indicated an effect of joint treatment. In experiment 1, the concentration of KS in synovial fluid was highest 1 day after joint injury, and the concentration in plasma peaked 2 days after joint injury. For ponies receiving chymopapain intra-articularly (generalized cartilage catabolism), a fivefold increase over baseline was observed in the concentration of KS in plasma (peak mean, 1.2 microgram/ml), and a tenfold increase over baseline in synovial fluid (peak mean, 2.0 mg/ml) was observed. On average, these maxima were threefold higher than values in fluids of ponies with osteochondral defects (focal cartilage disease). In experiment 2, nonexercised ponies had lower KS concentration (as a percentage of the preoperative concentration) in synovial fluid than did exercised ponies at all postoperative times, and.
Показать больше [+] Меньше [-]Sonographic brightness of the flexor tendons and ligaments in the metacarpal region of horses.
1993
Wood A.K.W. | Sehgal C.M. | Polansky M.
Sonographic observations were made of the image mean gray scale (MGS) of the flexor tendons and ligaments in the left and right metacarpal regions of each of 10 clinically normal horses. In images made in the dorsal and sagittal planes, the MGS was measured at multiple sites in the superficial digital flexor tendon (SDFT), deep digital flexor tendon (DDFT), accessory ligament (AL), and suspensory ligament (SL), and at single sites in the medial and lateral limbs of the SL, and the palmar ligament. Relative sonographic brightness of each tendon and ligament was calculated by dividing the value of its MGS by the mean value for the MGS of images of 3 soft tissue equivalent phantoms. When a multivariate repeated-measures of ANOVA of the relative brightness values was statistically significant (P < 0.05), Tukey's method of multiple comparisons was used to determine which values were significantly different from each other. In the dorsal plane, the SL was significantly brighter than the DDFT, SDFT, and AL; relative brightnesses of the DDFT and SDFT were similar, as were those of the SDFT and AL. In the sagittal plane, the SL again was the significantly brightest structure, followed by the Al, and similar brightnesses of the DDFT and SDFT. In dorsal images made 25 cm distal to the accessory carpal bone, relative brightnesses of the SDFT, DDFT, and the medial and lateral limbs of the SL were similar. In images made 30 cm distal to the accessory carpal bone, relative brightness of the palmar ligament was significantly (P < 0.05) less than that of the SDFT and DDFT in the dorsal plane, but not in the sagittal plane, where it was significantly greater. Relative brightness values represented a unique sonographic characteristic of each structure and, in the future, may provide further insights into tendon and ligament structure and function.
Показать больше [+] Меньше [-]Effect of titanium endoprostheses on bone mineral density measurements, using quantitative computed tomography.
1992
Markel M.D. | Morin R.L. | Roy R.G. | Gottsauner Wolf F. | Chao E.Y.S.
Quantitative computed tomography has been used extensively to measure bone mineral density; particularly in the vertebral column and in the proximal portion of the femur in human beings with osteoporosis. Other potential applications of this technique include evaluation of bone adjacent to metallic endoprostheses and evaluation of fractures as they heal. Unfortunately, metal causes severe image degradation, principally seen as starburst streaking. One method used to decrease these artifacts is by imaging less-attenuating materials, such as titanium alloy. Titanium decreases image degradation sufficiently to allow accurate determination of the geometric properties of cadaveric bone. In our study, the effect of a titanium segmental endoprosthesis on bone mineral density measurement was determined by use of bone specimens from dogs and calibration standards. Titanium decreased the bone mineral density of calibration solutions from 6.8 (500 mg/cm3) to 17.7% (250 mg/cm3), and increased bone mineral density of cortical bone by 5.3%. Titanium did not affect the repeatability of these scans, indicating that the error caused by titanium was systematic and can be corrected. Our data were suggestive that quantitative computed tomography can be used to measure bone mineral density of cortical bone adjacent to titanium endoprostheses, with a predictable increase in density measurement.
Показать больше [+] Меньше [-]