Nanotechnology has been used in a variety of medical applications, including diagnostics, immunisation, medication and gene delivery. Nanotechnology has opened up new ways for molecular biology and biotechnology applications, and it has revolutionised practically every area of veterinary and animal sciences by introducing new, small-scale instruments and materials that are advantageous to living species. Metallic nanoparticles, quantum dots, carbon nanotubes, magnetic nanoparticles, fullerenes,  liposomes, and dendrimers are among the several forms of nanomaterials employed in detection of various diseases, therapy, drug administration, animal nutrition and breeding. It is concluded that, before making nano-products available for animal use, extensive risk evaluations should be carried out to ensure their safety. So, this article provides an overview of existing and promising nano applications in veterinary research that may lead to increased efficiency and production.

Nutritional evaluation of different pulse chunnies was carried using Near Infrared Reflectance Spectroscopy (NIRS) and validated with wet analysis for inclusion in livestock feeds. The portable NIRS spectrophotometer FOSS XDS RCA and FOSS 6500 chemometrics software were used for the study. A total of 324 samples of four pulse chunnies (red gram (RGC), green gram (GGC), black gram (BLGC) and bengal gram (BGC)) were assessed using NIRS. It revealed that RGC had significantly (P<0.01) highest DM content than other three samples. The mean CP content was highest (P<0.01) in GGC and lowest in BGC and significantly (P<0.01) higher ether extract (EE) was recorded in BLGC and RGC and lowest in BGC samples. The ash content was significantly (P<0.01) highest in BLGC and lowest in RGC samples. Neutral detergent fibre (NDF), acid detergent fibre (ADF) and acid detergent lignin (ADL) contents were higher (P<0.01) in BGC and lower in GGC samples. Wet analysis shown, the DM content did not differ (P>0.05) among pulse chunni samples, while significantly (P<0.01) higher organic matter was recorded in RGC and lowest in BLGC samples. The CP was higher (P<0.01) in BLGC and lower in BGC and significantly (P<0.01) highest crude fibre recorded for BGC, RGC and was lowest in BLGC and GGC samples. Highest (P<0.05) EE was observed in BLGC while lowest in BGC. There was no significant (P>0.05) difference in nitrogen free extract among pulse chunnies, while ash content was significantly (P<0.01) higher in BLGC and lower in RGC samples. NDF, ADF and ADL were significantly (P<0.01) higher in BGC and lower in GGC samples. The study concludes that the NIRS technique can be used to screen large number of samples in lesser time for using them in livestock feed formulations as there is a high correlation between NIRS and conventional feed analysis.

A postpartum graded Murrah buffalo that calved 25 days before was presented with a history of swelling of the perianal region immediately after parturition. On examination, ventral anal region was found to be enlarged with a pouch that contained around 1.5 kg of dung. The buffalo was given caudal epidural anaesthesia and the perianal mucous membrane was scarified and sutured. Postoperatively antibiotic, anti-inflammatory and anti-histamine were given for 5 days and animal exhibited normal defecation without straining. The correction of unusual case of peri-partum third degree perineal laceration associated with rectal-vaginal fistula and rectal pouch formation in a graded Murrah buffalo, its management and successful recovery is reported.

The occurrence of the spirurid nematode, Pterygodermatites cahirensis in a Palm civet cat (Paradoxurus hermaphroditus) observed during necropsy is reported. The worms were found in the intestinal content. Male worms were small and slender compared to females. The worms had two rows of spines on the lateroventral sides along the whole length of the body. Males had short spicules. Females had uterus filled with developing ova. Eggs were thick-shelled with undifferentiated yolk mass.

An attempt was made to overview the conduct, components and output of various livestock research activities conducted in TANUVAS for the period from 2008 to 2018. Among 152 projects completed during the study period, there were 52 health projects, 36 production, 25 social science, 16 clinical science, 14 infrastructure, six processing, two environment and one education related projects. The research investment of projects completed from 2008 to 2018 was found to be the highest for Health (Rs.1767.70 lakhs), followed by Infrastructure (Rs.1723.40 lakhs), Production (Rs.668.72 lakhs), Social science (Rs.393.82 lakhs), Clinical science (Rs.360.28 lakhs), Education (Rs.221.47 lakhs), Processing (Rs.87.50 lakhs) and Environment (Rs.14.64 lakhs). Among various livestock species, Poultry research occupied predominant position with 39 numbers of projects with outlay of Rs.791.25 lakhs. It should be noted that the research on companion animals and fodder were less than 10 in last ten years. A total of 44 patents were filed in TANUVAS during last decade, among which seven were granted. It is concluded that the focus should also be made on fodder, swine and companion animal and fodder research.

The diseases in poultry cause huge losses in the form of mortality in acute infections or as substandard performance due to chronic illness. Biosecurity and vaccination are considered as two important primary strategies for disease prevention in poultry. On the other hand, breeding for disease resistance is an alternate strategy to combat the damages of diseases. Although, attempts were initiated to develop disease resistant poultry by breeding almost a century before, this branch of science renewed the interest among scientists because of catastrophic emerging and reemerging diseases like Avian influenza. It has proven over a period of time that poultry  exhibits genetic resistance to viral diseases like avian leukosis complex, Marek’s disease, avian influenza and Newcastle disease, bacterial disease like salmonellosis and may parasitic infestations. The key genes responsible for resistance to specific diseases have also been demonstrated. The breeding attempts for developing disease resistant poultry has yielded positive results with varying degree of success. The advent of sophisticated molecular methods like genomic selection using highdensity SNP chips, RNA-seq technique and identification of key marker genes and transgenesis could complement the conventional breeding methods to a larger extent in developing disease resistant poultry.

Food wastes of vegetable origin fed to pigs contained significantly (P<0.05) higher metabolizable energy, comparable crude protein and lower dry matter, crude fibre, total ash, calcium, phosphorus, copper and iron compared to pregnant gilt feed (NRC, 1998). To optimize the food wastes for nutrients to be comparable with pregnant gilt feed, de-oiled rice bran at 33% and mineral mixture at 2% were added as supplement for food wastes on DM basis. A feeding trial was conducted in 18 large white Yorkshire crossbred bred gilts. The treatment groups were pregnant gilt feed (T 1 ), food wastes as sole feed (T 2 ) and food wastes + evolved supplement (T 3 ) with 6 animals in each treatment. The gestation body weight gain and gestation length did not differ (P<0.05) significantly among the treatment groups. No significant difference in litter size, litter weight at birth and weaning weight were observed among the treatment groups. Higher per cent stillborns and per cent piglet mortality was observed in T 2 compared to T 1 and T 3 . The average birth weight and weaning weight of piglets were significantly (P<0.05) lower in T 2 . Supplementation to food wastes (T 3 ) increased the piglet birth weight and weaning weight comparable to T 1 . Sows body weight after farrowing and at the time of weaning and lactation body weight loss did not differ significantly (P<0.05) among the treatment groups.

The present study was undertaken to evaluate the effect of different levels of dried capsicum powder on the quality characteristics of chicken koftas. The capsicum dried powder was incorporated at three different levels viz. 2, 4 and 6% in the formulation. The products were analyzed for various physicochemical and sensory attributes. The pH, emulsion stability (83.56±0.011) (%), cooking yield (81.12±0.011) (%), crude protein, crude fat and total ash contents of the products showed significant (P<0.05) decreasing trend with increase in levels of incorporation of dried capsicum powder. However, a significant (P<0.05) increase in the water holding capacity (%), moisture (67.10±0.008) and crude fibre (1.56±0.006) contents of the chicken koftas was observed with increasing levels of incorporation. Sensory evaluation revealed that koftas prepared with 4 per cent capsicum dried powder had superior scores (P<0.05) compared to 2 and 6 per cent. Hence, incorporation of dried capsicum powder at 4 per cent level in chicken koftas was considered to be optimum. (Include some values of important findings). 

A study was carried out in the month of September, 2022 to know the economics on rearing of indigenous (local) comparative broiler birds at the Poultry Unit of SCS college of Agriculture, Rangamati, Assam Agricultural University, Dhubri, Assam. For the study, day old chicks of indigenous and broiler, 100 numbers each were introduced in deep litter system of management. Broilers were marketed at the completion of 6 th week, while the indigenous birds were kept up to 8 th week and then marketed. Mean body weight was found to be 2082.67±14.85 g and 658.29±3.49 g in the case of broilers and indigenous birds at 6 th week and 8 th week respectively. The feed conversion ratio (FCR) was recorded as 1.64 and 2.29 for broiler and indigenous birds, respectively. The cost of production per kg bird is Rs.114.70 and Rs. 227.90 for broiler and indigenous birds respectively. The net profit calculated in production of broilers and indigenous was Rs. 5100.00 and Rs. 7450.00 respectively. Benefit cost ratio (BCR) in broiler and indigenous bird was found to be 1.22.1.00 and 1.53:1.00, respectively.

The present study was aimed to study the comparative anatomy of Pectoral bones in pigeon and conure bird. In both the birds Pectoral bones were composed of Humerus, Radius and ulna, carpals, Carpometacarpus and Digits. Humerus of conure on its medial tuberosity well marked facet was noticed. Bones of forearm in both pigeon and conure were composed of thicker ulna and slender Radius. Carpometacarpus was composed of three bony elements. Digits of both the birds were three in number. Pigeons have strong well developed Pectoral bones and are strongest flyer when compared to that of conure. The anatomical feature of Pectoral bones in pigeon was similar to that of conure but had few variations.