Уточнить поиск
Результаты 1-10 из 10
Removal of Cd(II) Ions from Aqueous Solutions using adsorption By Bentonite Clay and Study the Adsorption Thermodynamics
2023
Hamood, Ahmed | Mohammed, Inas | Majeed, Ahmed
cadmium usually enter the environment and water resources through wastewater, released by various industries, and may have adverse effects. The current study employs surface of bentonite clay available locally in order to remove cadmium In solutions contaminated with this type of ions, in order to research on a surface with a high ability to adsorption of cadmium (II) ions, study Some factors affect the adsorption process on bentonite clay, such as contact time, pH the solution, Adsorbent particle size, Initial concentration of solutions and temperature of the solution were examined in the a batch process mode. The amount of adsorbed Cd (II) increased with height temperature, the optimum adsorption pH was about 6.5. Under this condition, the percent removal was 95.17%. The adsorption isotherms were studied and the results of adsorption processes were more fitted with Friendlich model rather than Langmuir adsorption model. Thermodynamic study showed that, ΔH was endothermic, ΔG is found to be negative That is, the process is automatic and ΔS was found to be positive. The current study also involves practical application using bentonite to get rid of Cd(II) ions to from wastewater of Hamdan's station of the Basra- iraq, The results indicate high affinity (97.84%) removal of Cd(II) ions.
Показать больше [+] Меньше [-]Effective Removal of Indigo Carmine in Aqueous Solutions using a Low-Cost Adsorbent Developed from Corn Husk Waste: Synthesis, Batch, and Optimization Studies
2023
Handayani, Tuti | Emriadi, Emriadi | Deswati, Deswati | Ramadhani, Putri | Zein, Rahmiana
Acid-activated corn husk waste (CHW) was used to investigate the adsorption mechanism of Indigo Carmine (IC) dye from an aqueous solution. The effect of different operating parameters such as pH (1-7), initial IC dye concentration (40-400 mg/L), contact time (5-75 min), and heating temperature (25–200 °C) was measured on the removal of IC dye by the CHW. The maximum uptake of IC dye was observed at an initial pH of 2. The maximum capacity of 13.57 mg/g and the maximum dye removal of 89.01 % in wastewater. The adsorbents were characterized using Fourier Transforms Infrared Spectrophotometry (FTIR), Scanning Electron Microscopy (SEM), Brunauer-Emmett-Teller (BET) surface area analysis, X-ray Fluorescence (XRF), and Thermogravimetry Analysis. The characterization process reveals the differences in adsorbent characteristics before and after the adsorption processes. The Langmuir showed the best fitting (R2 = 0.977) and described multilayer adsorption on diverse surfaces. The pseudo-second-order kinetic model best correlated with the experimental data (R2 = 0.981). Thermodynamics revealed that adsorption was favorable spontaneous and exotherm. The study's results indicated that using CHW as a low-cost adsorbent to treat IC dye was efficient and beneficial to the environment.
Показать больше [+] Меньше [-]Use of Eggshell as a Low-Cost Alternative Adsorbent for Elimination of Fluoride from Groundwater
2023
Assami, Zakaria | Messaitfa, Amar
This paper aims to study the possibility of providing a low-cost alternative for the adsorbents used in the fluoride adsorption from water by using eggshells. Indeed, eggshells were used as an adsorbent for fluoride adsorption from a drinking groundwater sample containing (2.14 mg/l) of fluoride. The eggshells were crushed and sieved into three particle sizes (0.2, 0.5, and 1mm) and then heated at different temperatures ranging from 100 to 250°C. XRD, FT-IR, pHpzc, and TG/DTA analysis were used for the characterization of the adsorbents. Adsorption batch experiments were carried out to determine the adsorption capacity of eggshell powder such as, particle size, preparation temperature, contact time, and adsorbent dose. A spectrophotometer UV-VIS was used to assess fluoride removal efficiency. The eggshell powder heated at 250°C with 0.2mm of particle size was found to be the most efficient adsorbent, with a maximum fluoride removal efficiency of 51.4%, a maximum adsorption capacity of 0.052mg/g, and a residual fluoride concentration of 1.1mg/l within 150 minutes. The data of the adsorption kinetic on ES250°0.2 were successfully fitted with the pseudo-second-order model with a satisfying coefficient of determination (R2=0.993). The results of the intra-particle diffusion model showed a multi-linearity, revealing that the diffusion of fluoride into the adsorbent was by two stages with diffusion rate constants of Ki = 0.007 (mg /g/min1/2) and Ki = 0.001(mg /g/min1/2) for the first and second stage respectively. An adsorbent dose of 1.5g and 1 hour of contact time were sufficient to decrease fluoride concentration from 2.14 to 1.1mg/l.
Показать больше [+] Меньше [-]Aeration, Alum, and Kaolin Ore for Nutrient and Heavy Metal Removal from Urban Wastewater for the Purpose of Reuse and Conservation
2023
Soliman, Mohamed | Rashed, Mohamed | Soltan, Mohamed
Domestic and industrial wastewater contributed to some urban wastewater, which requires specific processing before being disposed into surface waters or reused for irrigation. This paper aimed to employ kaolin as an adsorbent to remove heavy metals from wastewater, as well as aeration and alum to remove nutrients. Experiment were conducted in three parts: first, involved using the aeration method to determine the ideal amount of time to remove or minimize the nutrients. Second, involves treating the solution with potassium alum using various alum doses at the obvious times to eliminate or minimize the nutrients, while third step involves treating the solution with kaolin ore with a size of < 63 µm at various doses, pH, and contact times to remove heavy metals. The findings showed that the aeration method completely removed CO3, OH, PO4, NO3, Ca, and Mn ions after contact time equal 120, 24, 192, 24, 120, and 48 hrs, respectively. Applaying alum treatment method can remove completely CO3, OH, PO4, NO3, and Mn, after contact time 120, 24, 120, 24, and 24 hrs, respectively. When Kaolin ore used as adsorbent, the removal efficiency of Fe, Cd, Cr, Cu, Sr, Mn, and Zn were; 92, 100, 100, 100, 94, 100, and 88 % ,respectively in 24 hours contact time. The experiment succeeds in treatment of industrial wastewater that was within the range of specified limitations for disposing into surface water or reuse in irrigation field as stated by Egyptian standard code using the three successive treatment techniques.
Показать больше [+] Меньше [-]Fractionation of levofloxacin and ofloxacin during their transport in NOM-goethite : Batch and column studies
2023
Qin, Xiaopeng | Zhong, Xiaofei | Wang, Bin | Wang, Guangcai | Liu, Fei | Weng, Liping
Adsorption and transport of levofloxacin (LEV) and ofloxacin (OFL) enantiomers in a matrix containing goethite and natural organic matter (NOM) were investigated using batch and column experiments. In batch studies, competition and enantioselectivity were observed in the adsorption of LEV and OFL. Enantioselectivity upon adsorption was investigated by comparing changes in the enantiomer fraction (EF) (the ratio of LEV to the sum of LEV and OFL remaining in the solution) after and before adsorption. At pH < 7, there was hardly any selectivity in adsorption of OFL and LEV to goethite. At pH > 7, OFL showed a stronger adsorption than LEV to goethite, and this preference remained when NOM samples of Leonardite humic acid (LHA) and Elliott Soil fulvic acid (ESFA) were added. However, when Suwannee River NOM (SRNOM) was added, the preference was reversed, and LEV was adsorbed more strongly. In single systems, the presence of different types of NOM increased adsorption of LEV and OFL, especially LEV. In column studies, preloaded NOM decreased the transport of LEV and OFL through goethite-coated sand. The EF values in the effluent increased with retention time and reached the largest values (0.59–0.72) at around 1.5 pore volume (PV), and then decreased again, reaching a stable value at 5.0–30.0 PV. Both batch and column experiments showed that, fractionation of LEV and OFL occurred during adsorption and transport in the presence of NOM-goethite complexes, which would eventually affect their environmental fate
Показать больше [+] Меньше [-]Benchmarking biochar with activated carbon for immobilizing leachable PAH and heterocyclic PAH in contaminated soils
2023
Carlini, Carlotta | Chaudhuri, Sampriti | Mann, Oliver | Tomsik, Daniel | Hüffer, Thorsten | Greggio, Nicolas | Marazza, Diego | Hofmann, Thilo | Sigmund, Gabriel
Remediation of residually contaminated soils remains a widespread problem. Biochar can immobilize polycyclic aromatic hydrocarbons (PAH). However, studies on its ability to immobilize PAH and N, S, and O substituted PAH (hetero-PAH) in real soils, and benchmarking with commercial activated carbon are missing. Here, we compared the ability of pristine biochar (BC), steam-activated biochar (SABC), and commercial activated carbon (AC) to immobilize PAH and hetero-PAH. The three carbons were tested on soils from four different contaminated sites in Austria. Different amendment rates (w/w) of the carbons were investigated (BC: 1.0, 2.5, and 5%; SABC: 0.5, 1.0, and 2.0%; AC: 1%) in batch experiments to cover meaningful ranges in relation to their performance. SABC performed better than AC, removing at least 80% PAH with the lowest application rate of 0.5%, and achieving a complete removal at an application rate of 1.0%. BC performed slightly worse but still acceptable in residually contaminated soils (40 and 100% removal at 1 and 5% amendment, respectively). The ability of BC and SABC to immobilize PAH decreased as the PAH-molar volume increased. PAH with three or more rings were preferentially removed by AC compared to SABC or BC. This can be explained by the difference in pore size distribution of the carbons which could limit the accessibility of PAH and hetero-PAH to reach sorption sites for π- π electron donor-acceptor interactions, which drive PAH and hetero-PAH sorption to carbons. Column percolation tests confirmed the results obtained in batch tests, indicating, that decisions for soil remediation can be derived from simpler batch experiments. In soil samples with 1% BC, a reduction of over 90% in the total concentration of PAH in the leached water was observed. Overall, BC and SABC were demonstrated to be valid substitutes for AC for stabilizing residually contaminated soils.
Показать больше [+] Меньше [-]Fractionation of levofloxacin and ofloxacin during their transport in NOM-goethite : Batch and column studies
2023
Qin, Xiaopeng | Zhong, Xiaofei | Wang, Bin | Wang, Guangcai | Liu, Fei | Weng, Liping
Adsorption and transport of levofloxacin (LEV) and ofloxacin (OFL) enantiomers in a matrix containing goethite and natural organic matter (NOM) were investigated using batch and column experiments. In batch studies, competition and enantioselectivity were observed in the adsorption of LEV and OFL. Enantioselectivity upon adsorption was investigated by comparing changes in the enantiomer fraction (EF) (the ratio of LEV to the sum of LEV and OFL remaining in the solution) after and before adsorption. At pH < 7, there was hardly any selectivity in adsorption of OFL and LEV to goethite. At pH > 7, OFL showed a stronger adsorption than LEV to goethite, and this preference remained when NOM samples of Leonardite humic acid (LHA) and Elliott Soil fulvic acid (ESFA) were added. However, when Suwannee River NOM (SRNOM) was added, the preference was reversed, and LEV was adsorbed more strongly. In single systems, the presence of different types of NOM increased adsorption of LEV and OFL, especially LEV. In column studies, preloaded NOM decreased the transport of LEV and OFL through goethite-coated sand. The EF values in the effluent increased with retention time and reached the largest values (0.59–0.72) at around 1.5 pore volume (PV), and then decreased again, reaching a stable value at 5.0–30.0 PV. Both batch and column experiments showed that, fractionation of LEV and OFL occurred during adsorption and transport in the presence of NOM-goethite complexes, which would eventually affect their environmental fate
Показать больше [+] Меньше [-]Benchmarking biochar with activated carbon for immobilizing leachable PAH and heterocyclic PAH in contaminated soils
2023
Carlini, Carlotta | Chaudhuri, Sampriti | Mann, Oliver | Tomsik, Daniel | Hüffer, Thorsten | Greggio, Nicolas | Marazza, Diego | Hofmann, Thilo | Sigmund, Gabriel
Remediation of residually contaminated soils remains a widespread problem. Biochar can immobilize polycyclic aromatic hydrocarbons (PAH). However, studies on its ability to immobilize PAH and N, S, and O substituted PAH (hetero-PAH) in real soils, and benchmarking with commercial activated carbon are missing. Here, we compared the ability of pristine biochar (BC), steam-activated biochar (SABC), and commercial activated carbon (AC) to immobilize PAH and hetero-PAH. The three carbons were tested on soils from four different contaminated sites in Austria. Different amendment rates (w/w) of the carbons were investigated (BC: 1.0, 2.5, and 5%; SABC: 0.5, 1.0, and 2.0%; AC: 1%) in batch experiments to cover meaningful ranges in relation to their performance. SABC performed better than AC, removing at least 80% PAH with the lowest application rate of 0.5%, and achieving a complete removal at an application rate of 1.0%. BC performed slightly worse but still acceptable in residually contaminated soils (40 and 100% removal at 1 and 5% amendment, respectively). The ability of BC and SABC to immobilize PAH decreased as the PAH-molar volume increased. PAH with three or more rings were preferentially removed by AC compared to SABC or BC. This can be explained by the difference in pore size distribution of the carbons which could limit the accessibility of PAH and hetero-PAH to reach sorption sites for π- π electron donor-acceptor interactions, which drive PAH and hetero-PAH sorption to carbons. Column percolation tests confirmed the results obtained in batch tests, indicating, that decisions for soil remediation can be derived from simpler batch experiments. In soil samples with 1% BC, a reduction of over 90% in the total concentration of PAH in the leached water was observed. Overall, BC and SABC were demonstrated to be valid substitutes for AC for stabilizing residually contaminated soils.
Показать больше [+] Меньше [-]Study on the Experimental Conditions of Adsorption of Lanthanum (III) on Boron Nitride Nanosheets
2023
C. Fu, Y. He, C. Yang, J. He, L. Sun, G. Sheng, X. Zhang, L. Wang, L. Li and W. Linghu
This paper investigated the adsorption properties of boron nitride materials for La(III), and the possible action mechanism was put forward based on experiments. Then the boron nitride materials were characterized by SEM, TEM, XRD, and FT-IR before and after adsorption. In addition, the effects of pH, the amount of adsorbent, the concentration of La(III) solution, and adsorption time on the adsorption efficiency were also investigated. It is found that under a certain amount of adsorbent when the pH is 7.0 and the concentration of La(III) is 40 mg.L-1, the adsorption ability of La(III) is the best. The maximum adsorption capacity is 201.45 mg.g-1. The adsorption kinetic data are in good agreement with the pseudo-second-order and intra-particle diffusion models. These results show that boron nitride has a good application prospect for removing and recovering La(III) in water and has a certain practical application value.
Показать больше [+] Меньше [-]Heavy Metal Remediation from Water/Wastewater Using Bioadsorbents - A Review
2023
Akhil Tewari, Dinesh S. Bhutada and Vinayak Wadgaonkar
This paper aims to emphasize heavy metals’ impact on water and its removal mechanism with a focus on adsorption. Furthermore, factors affecting bio adsorption, such as temperature, pH, RPM, and initial heavy metal concentration, have been studied for different heavy metals and bioadsorbents. A comparison of their adsorption capacities and efficiencies has been made. This review reviewed different bioadsorbents for their suitability in removing cadmium, lead, and copper ions from water and wastewater, typically by using adsorption as a methodology. A suitable summary compares various heavy metal removal techniques and their advantages and limitations. For adsorption, the characteristics of bioadsorbents and their activation steps have been consolidated. Furthermore, the effects of operational parameters and adsorption mechanisms have been discussed in the review. Apart from assessing the suitability of bioadsorbent, a novel bioadsorbent has been suggested for copper ions removal. The findings shall be significantly useful in applying bioadsorbent in water/wastewater treatment fields to reduce heavy metal pollution. Thorough and well-planned research in this field can facilitate the creation of sustainable and durable technology for wastewater treatment, addressing the increasing demand for safe and dependable water resources, focusing on making it cost-effective and recyclable.
Показать больше [+] Меньше [-]