This study was carried out to analyze the variations of Benzene, Toluene, and para- Xylene (BTp-X) present in the urban air of Delhi. These pollutants can enter into the human body through various pathways like inhalation, oral and dermal exposure posing adverse effects on human health. Keeping in view of the above facts, six different locations of Delhi were selected for the study during summer and winter seasons (2016-2017). The concentrations of BTp-X on online continuous monitoring system were analyzed by chromatographic separation in the gaseous phase followed by their detection using a Photo Ionization Detector (PID). The concentrations of BTp-X were found maximum at a high traffic intersection area as 68.35±48.26 µg/m3 and 86.84±32.55 µg/m3 in summer and winter seasons respectively and minimum at a residential area as 4.34±2.48 µg/m3 and 15.42±9.8 µg/m3 in summer and winter seasons respectively. The average BTp-X concentrations of summer and winter seasons were found as 9.88, 20.68, 28.52, 49.75, 64.04, and 77.59 µg/m3 at residential, institutional, commercial, low traffic intersection, moderate traffic intersection and high traffic intersection areas respectively. Clearly, it has been found that the concentrations of these compounds were more on the traffic areas indicating that the vehicles are the major emission source. Hence, it may be concluded that the number of vehicles along with the high traffic congestion on the city streets and roads results in more accumulation of aromatic compounds and deteriorate the urban air quality.

Management of solid wastes is considered as an economic and environmental issue in the building stone industry. The current study uses raw and calcined calcareous sludge, generated in the stone cutting factories, in order to remove sulfur dioxide. Sludge characterization has been performed, using X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) analyses. The removal experiments of sulfur dioxide have conducted under different humid contents and adsorbent doses. The results showed that the higher the adsorbent dosage and humidity content, the greater the SO2 adsorption.. The calcination process at temperatures of 400, 500, 600, and 700℃ revealed that with rising calcination temperature and humidity content, the adsorbent capability is enhanced considerably. This method could be developed for the management of stone sludge produced from the stone cutting industry through its conversion into an effective and low-cost adsorbent for desulfurization process.

The main objectives of the present study are to both evaluate the level of awareness about air pollution and examine the determinants, likely to affect this awareness. As a result, it discusses influential factors on air pollution awareness, presenting findings from a case study, conducted in the city of Isfahan, Iran, wherein 400 individuals have been selected via proportional random sampling and the data has been collected by means of a questionnaire, provided by the authors, the validity of which has been confirmed by a panel of experts. As for the assessment of the questionnaire’s reliability, this study has used Cronbach's alpha to find out that it has been beyond 0.7 for all variables. The data have been analyzed, using descriptive and inferential statistics, such as the extent of mean, standard deviation, the coefficient of variation, correlation analysis, and regression analysis. Results from the latter show that level of education, level of using information sources, membership, motivation, and participation could explain 50% of the variations in the level of awareness concerning air pollution.

The purpose of this study is to use both agent-based modeling as a new method in modeling dynamic phenomena and GIS to show the effects of carbon monoxide (CO) on individuals in the city of Tehran. After collecting the latest information about the severity of carbon monoxide pollutants on different days, one of the days with a very high severity of this pollutant has been selected for investigation and the interpolation map of its data has been developed via IDW method in ArcGIS software environment, which is then re-classified with the NetLogo software environment used to run the agent-based model. At this stage, the agents are randomly produced in four different age groups in the environment and begin moving with the onset of the running process in the environment. Also, the symptoms, caused by the pollution effects on the agents, appear in form of changes in color and are based on carboxyhemoglobin (COHb) levels (percentage) of each. The results indicate that among the considered older age groups, the members of the age group above 65, have had been mostly affected by pollution and the effect of pollution on the agents of the age group of 13 to 30 years old has been less than the other groups.