International audience | A contaminated soil was collected in a field adjacent to a derelict As (III) smelter in Reppel (Bocholt, Belgium). A single soil treatment (% by soil weight) based on either iron grit (SS, 1%), beringite (B, 5%), or iron grit (1%) + beringite (5%) (BSS) was applied. Untreated and treated Reppel soils and a control soil were placed in lysimeters inside a greenhouse and cropped annually. The efficiency of soil treatments in decreasing As and metals in exposure sources and restoring soil functions was assessed 6 years after the treatments commenced. Decreases in extractable Cd, Mn, Zn and As occurred in the BSS soil. Only BSS treatment reduced both As and metal concentrations in leachates. BSS treatment produced best growth of lettuce and cabbage, the highest shoot and pod yields for dwarf bean, the lowest As, Cd and Zn concentrations in plant tissues, and partly restored Rhizobium nodulation on bean roots. The epigeic earthworm (Dendrobaena octaedra) could only survive in the BSS soil. Depurated living worms from the BSS soil had Cd concentration similar to those in control worms, but higher As, Ca, Fe, and Zn concentrations. Based on physiologically based extraction test (PBET), As bioaccessibility was reduced from 12% (untreated soil) to 7.4% (BSS) and 3% (SS), but only the SS treatment decreased the bioaccessibility of Cd (-30%) and Pb (-35%). The range of chemical and biological indicators suggested that BSS amendment was the most effective treatment for restoration of normal soil functions 6 years after initial treatment of the Reppel soil

This study investigates the fate and behavior of lead (Pb), copper (Cu), antimony (Sb), and arsenic (As) in a shooting range soil. The soil samples were collected from the surface (0-15 cm) and the subsurface (15-40 cm and 40-55 cm) of a grassy and wood chip covered impact area behind a firing position. Optical microscopy images indicate significant amounts of corroded bullet fragments and organic wood chips in the surface soil. Analysis by X-ray powder diffraction (XRPD) and scanning electron microscopy electron dispersive X-ray spectroscopy (SEM-EDS) showed that metallic Pb was transformed into lead oxides (litharge PbO and massicot PbO) and lead carbonates (hydrocerussite Pb₃(CO₃)₂(OH)₂, cerussite PbCO₃, and plumbonacrite Pb₅(CO₃)₃O(OH)₂). Rietveld quantification indicated the surface soil contained 14.1% metallic Pb, 17.9% hydrocerussite, 5.2% plumbonacrite, 5.9% litharge, and 3.9% massicot on a dry weight basis, or a total of 39.7% Pb, far in excess of lead concentrations typically found in US shooting range soils. Metallic Cu (bullet jacket material) appeared stable as no secondary minerals were detected in the surface soil. As and Sb concentrations were on the order of 1,057 mg/kg and 845 mg/kg respectively. The elevated soil pH coupled with high organic carbon content is thought to have caused downward migration of metals, especially for Pb, since 4,153 mg Pb/kg was observed at a depth of 55 cm. More than 60% of Pb was concentrated in the coarse soil (> 0.425 mm) fraction, suggesting soil clean-up possible by physical soil washing may be viable. The concentrations of Pb, As, and Sb in the toxicity characteristic leaching procedure (TCLP) extracts were 8,869 mg/L, 6.72 mg/L, and 6.42 mg/L respectively, were above the USEPA non-hazardous regulatory limit (As and Pb) of 5 mg/L. The elevated Sb and As concentrations draw concern because there is historically limited information concerning these metals at firing ranges and several values exceeded local soil cleanup criteria. As the high Pb concentrations appeared to be linked to the presence of organic-rich berm cover materials, the use of wood chips as berm cover to prevent soil erosion requires reconsideration as a shooting range management practice.

Chemical immobilisation of inorganic contaminants by increasing the sorption capacity of soils and/or promoting the formation of sparingly soluble precipitates may be a cost-effective approach to counteract groundwater pollution. This study focuses on the enhanced retention of arsenic in two contaminated soils by addition of solid iron(II)sulphate. Four lab-scale column experiments were performed under unsaturated conditions with subsoil material sampled at a former timber preservation site and a pigment production plant. Arsenic effluent concentrations indicated 89.9 to 99.8% immobilisation in the treated columns. Sequential extractions showed a shift in contaminant binding forms towards the iron(hydr)oxide and residual fractions. Possible immobilisation mechanisms are the precipitation of FeAs phases, the formation of inner sphere complexes, and/or the occlusion of arsenic in newly formed amorphous/crystalline iron oxides. Bromide breakthrough curves point to the fact that the addition of iron(II)sulphate only moderately affects soil hydraulic properties. In contrast to reduced emissions of arsenic, increased seepage water concentrations were observed for other trace elements (e.g., cobalt, nickel, zinc). Mass balances indicate that this effect is primarily related to the temporary pH-drop caused by the oxidation of ferrous iron. The results show that chemical immobilisation using iron(II)sulphate is a promising way to protect groundwater quality at sites contaminated with timber preservation and pigment production remnants. As a prerequisite, optimum amendment levels need to be established and practical/field tests should be accompanied by a monitoring for a broad range of relevant trace elements.

Bangladesh is currently the subject of the world's largest mass arsenic poisoning in history. Groundwater throughout Bangladesh and West Bengal is contaminated with naturally occurring arsenic from the alluvial and deltaic sediments that form the region's aquifers. It has been estimated that 75 million people are at risk of developing health effects associated with the ingestion of arsenic. This project focuses on the use of microorganisms such as bacteria and algae to remove arsenic from water. Arsenic in the arsenite form was used in the studies. Experiments were conducted with a common alga and wastewater bacteria. A common green algae Scenedesmus abundans was used for determining arsenic uptake in batch experiments. Results of the experiments indicated that the algae biosorption could be modeled by the conventional Langmuir isotherm model. Algae morphology studies indicated that the algae cells were impacted due to the presence of arsenic as evidenced by clumping or loss of cell clusters. The wastewater bacteria also were capable of high percent of arsenic removal. Results indicate that microbial uptake of arsenic may be a viable method of pretreatment of arsenic contaminated water. However algae and sludge disposal would pose a problem and will have to be dealt with accordingly.