Both occupational and environmental exposure to asbestos-mineral fibres can be associated with lung diseases. The pathogenic effects are related to the dimension, biopersistence and chemical composition of the fibres. In addition to the major mineral elements, mineral fibres contain trace elements and their content may play a role in fibre toxicity. To shed light on the role of trace elements in asbestos carcinogenesis, knowledge on their concentration in asbestos-mineral fibres is mandatory. It is possible that trace elements play a synergetic factor in the pathogenesis of diseases caused by the inhalation of mineral fibres. In this paper, the concentration levels of trace elements from three chrysotile samples, four amphibole asbestos samples (UICC amosite, UICC anthophyllite, UICC crocidolite and tremolite) and fibrous erionite from Jersey, Nevada (USA) were determined using inductively coupled plasma mass spectrometry (ICP-MS). For all samples, the following trace elements were measured: Li, Be, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Rb, Sr, Y, Sb, Cs, Ba, La, Pb, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Th, U. Their distribution in the various mineral species is thoroughly discussed.The obtained results indicate that the amount of trace metals such as Mn, Cr, Co, Ni, Cu and Zn is higher in anthophyllite and chrysotile samples, whereas the amount of rare earth elements (REE) is higher in erionite and tremolite samples. The results of this work can be useful to the pathologists and biochemists who use asbestos minerals and fibrous erionite in-vitro studies as positive cyto- and geno-toxic standard references.

The present investigation represents a new approach useful to evaluate the general population risk correlated with environmental exposure to air dispersed inorganic fibers. The used method is based on the evaluation of the respirable inorganic fibers both air dispersed in a big city and contained in lungs of the general population following their respiration. Moreover, these data allow to identify the sources of dispersion (anthropogenic or natural) in air of the inorganic fibers and therefore to apply strategies to improve air quality. To describe this approach, we investigated air samples from a big city in NW Italy and lung inorganic burden of people here lived. This paper reports the data of the airborne inorganic fibers detected in two sampling campaign (2014 and 2016), in 24 districts of Torino (Piemonte - NW Italy), and in some autoptic lungs of general population lived here. The airborne fibers (collected on mixed-cellulose esters membrane) were characterized by SEMEDS. The identified inorganic fiber species were assigned to 5 classes, one of these including 2 types of asbestos. These last are grouped as tremolite/actinolite asbestos. They are dispersed from natural sources (i.e. certain kinds of rocks outcropping in the city surrounding areas). In no-one of the 24 districts of Torino their concentration highlighted a situation of asbestos pollution in place.A correlation with inorganic fibers (collected on mixed-cellulose esters membrane and characterized by SEM-EDS) detected in lung tissue samples of 10 subjects lived in Torino all their life and without professional exposure to asbestos were attempted. The only types of fibers identified as asbestos are tremolite/actinolite asbestos, and they match those detected in air sampling. The number of fibers per 1 g of tissue dry weight is lower than the quantities reported as indicative of significant asbestos exposure. We observed interesting gender differences.

Vehicular emissions have become one of the main source of pollution of urban soils; this highlights the need for more detailed research on various traffic-related emissions and related distribution patterns. Since the banning of asbestos in the European Union, its substitution with antimony (Sb) in brake linings has led to increased inputs of this toxic metalloid to environmental compartments. The objective of this study was to provide detailed information about the spatial distribution patterns of Sb and to assess its mobility and bioavailability. Roadside soils along an arterial road (approx. 9000 vehicles per day) in Cologne (Germany) were studied along five transects, at four soil depths and at seven sampling points set at varying distances from the road (n = 140). For all samples, comprehensive soil characterization was performed and inverse aqua regia-extractable trace metal content was determined being pseudo-total contents. Furthermore, for one transect, also total Sb and a chemical sequential extraction procedure was applied (n = 28). Pseudo-total Sb for all transects decreased significantly with soil depth and distance from the road, reflecting a distribution pattern similar to that of other trace metals associated with brake lining emissions. Conversely, metals associated with exhaust emissions showed a convex distribution. The geochemical fractionation of Sb revealed the following trends: i) non-specifically sorbed Sb was <5%; ii) specifically sorbed Sb was only detected within 1 m distance from the road and decreased with depth; iii) Sb associated with poorly-crystalline Fe oxides decreased with distance from the road; and iv) content of Sb bounded to well-crystalline Fe oxides, and Sb present in the residual fraction remained relatively constant at each depth. Consequently, roadside soils appear to inhibit brake lining-related Sb contamination, with significant but rather low ecotoxicological potential for input into surface and groundwater.

The deposition of remaining nanoparticles in the Caribbean Sea generates the formation of potentially dangerous elements, which influence at the imbalance of ecosystems. The detection of nanoparticles is not simple and the use of conventional methods is difficult application, which is why we highlight the immediacy and importance of this research for the areas of marine biology, urbanism, engineering and geosciences, applied in the Caribbean Sea. The general objective of this study is to evaluate the use of advanced methods for the determination of toxic nanoparticles, which can directly affect the development of marine organisms in the aquatic ecosystem in waters of the Caribbean Sea, favoring the construction of future international public policies with the elaboration of projects capable of mitigating these levels of contamination. The morphology and structure of nanoparticles were analyzed by emission scanning electron microscope with a high-resolution electron microscope. The nanoparticles smaller than 97 nm were identified in different proportions. The morphological analyses indicated nanoparticles' presence in the form of nanotubes, nanospheres, and nanofibers, which were shown in an agglomerated form. The presence of potentially hazardous elements, such as As, Cd, Pb, Mg, Ni and V were verified. In addition, the presence of asbestos in the form of minerals was confirmed, and that of titanium dioxide was found in large quantities. The results provide new data and emphasize the possible consequences to the in the Caribbean Sea, with the identification of dangerous elements (As, Cb, Pb, Hg, Ni and V), harmful to the marine ecosystem. Therefore, there is a need for strict control to reduce contamination of the Caribbean Sea and avoid risks to the ecosystem and public health, through suggestions of international public policies, through constant monitoring and the application of environmental recovery projects in this marine estuary.

Previous studies have made some progress with the use of microbial community properties as assessment criteria for rehabilitation success of post-mining areas. Currently, there is a need for reference ranges of specific properties in rehabilitated post-mining sites to make this approach more practical. The aim of this investigation was to compare assessment parameters indicative of microbial community function (enzymatic assays) and structure (phospholipid fatty acid (PLFA) analysis) in rehabilitated asbestos and coal discard sites and to establish ranges of minimum and maximum values for these parameters in both types of sites. The range established for dehydrogenase activity in coal discard sites was 24.3–339.5 μg INF g−1 2 h−1 and for asbestos 44.5–544.6 μg INF g−1 2 h−1. Ranges were also established for β-glucosidase, urease, acid phosphatase and alkaline phosphatase. Complete PLFA profiles were determined and ranges established for major PLFA groups and ratios in both types of discard. From the PLFA profiles, viable microbial biomass was determined as 6,080–29,851 and 8,128–47,242 pmol g−1 dry weight for the coal and asbestos discard sites, respectively. While similar ranges were observed for both types of discard, a canonical correspondence analysis that accounts for functional and structural characteristics showed that sites clustered according to the origin of the samples.

Like other dangerous pollutants in the air, asbestos has negative and adverse effects on human and animal health. The present study is designed to determine the concentration of asbestos in the air of the most industrial city of Iran (Karaj) in 2018–2019. For this purpose, 4 samples were taken from different areas of the air of Karaj during a year with an SKC pump and flow of 6 L/min for 8 h and in 45 days, and a total of 68 samples of asbestos fibers were collected. Then, the samples were analyzed by phase-contrast microscope (PCM) and scanning electron microscopy (SEM). Eventually, the health effects of asbestos fibers were evaluated by the IRIS EPA method. The average concentration of asbestos fibers was 1.84 f/L PCM and 18.16 f/L SEM. Also, the results of statistical correlation analysis indicated that asbestos fibers are positively correlated with wind speed but negatively correlated with the other three parameters (temperature, relative humidity, and pressure). On the other hand, the average annual risk of asbestos fiber in the ambient air of Karaj for all samples was in the range of 4.32 × 10⁻⁶ to 1.81 × 10⁻⁴ which in some places had more danger than the recommended risk range. According to the EPA guidelines, carcinogenicity acceptable levels are in the range of 10⁻⁴ and 10⁻⁶. Values higher than 10⁻⁴ have more carcinogenic risk and values lower than 10⁻⁶ have a lower carcinogenic risk.

The incidence of Legionella and Acanthamoeba spp. was correlated to microbial indicator analysis and physico-chemical characteristics of rainwater harvested from catchment areas constructed from galvanized zinc, Chromadek®, and asbestos, respectively. Quantitative PCR (qPCR) analysis indicated that no significant difference (p > 0.05) in copy numbers of Legionella spp. and Acanthamoeba spp. was recorded in tank water samples collected from the respective roofing materials. However, significant positive Spearman (ρ) correlations were recorded between the occurrences of Legionella spp. gene copies vs. nitrites and nitrates (p = 0.05) in all tank water samples. Significant positive correlations were also established between Acanthamoeba spp. vs. barium (p = 0.03), magnesium (p = 0.02), sodium (p = 0.02), silicon (p = 0.05), arsenic (p = 0.03), and phosphate (p = 0.01), respectively. Additionally, while no significant correlations were observed between Legionella spp. vs. the indicator bacteria (p > 0.05), positive correlations were observed between Acanthamoeba spp. vs. total coliforms (p = 0.01) and Acanthamoeba spp. vs. Escherichia coli (p = 0.02), respectively. Results obtained in the current study thus indicate that the incidence of Acanthamoeba and Legionella spp. in harvested rainwater was not influenced by the roofing material utilized. Moreover, it is essential that the microbial quality of rainwater be assessed before this water source is implemented for potable and domestic uses as untreated harvested rainwater may lead to legionellosis and amoebae infections.

The manufacture of asbestos materials has been banished worldwide due to their toxicity, but discarding the existing wastes remains a challenge. We investigated an alternative mechanochemical method to treat asbestos-cement materials by loading them with potassium and phosphorus from KH₂PO₄ during the milling process to obtain a product used as liming and soil conditioner. The results showed total asbestos fibrous elimination after 7 to 8 h of milling. The materials showed a slow-release fertilizer profile. The liming property is maintained when the asbestos-cement weight proportion used is equal to or higher than KH₂PO₄. A comparative soil experiment with limestone also indicates that lower doses of the K- and P-enriched detoxified asbestos cement were required to reach similar liming effects. Maize cultivation (greenhouse) was used to evaluate its performance showing higher biomass production for the sample loaded with potassium and phosphorous.

Although every year, thousands of people die from asbestos-related diseases, many people disregard things that are past. Meanwhile, a lot of people, in particular, in many Asia countries that have no guideline values for waterborne asbestos are currently in a fever of anxiety about the possibility of its health hazards. This study focused on a grasping the actual situation of asbestos in household tap water. An intensive collection of the tract drinking-water was conducted in Iksan, Korea (at six homes), and Fukuoka, Japan (at nine homes). After pretreatment, both morphological observation and elemental analysis were simultaneously carried out using a scanning electron microscopy (SEM) with an energy dispersive X-ray spectrometer (EDX). The concentrations of waterborne asbestos fiber varied from place to place in both local cities. Their average concentrations at all sites in Iksan and Fukuoka were 213.3 and 181.1 f/L, respectively. Although the measured values in this study were the sum of chrysotile, amosite, and crocidolite fibers with a high risk of cancer, they were found to be consistently below the MCL (the Maximum Contaminant Level recommended by the U.S. toxicological profile for Asbestos). A significant link was found between open water supply channels and waterborne asbestos. The backward wind trajectory projections indicated that the present water sampling sites might be affected by the airborne asbestos fiber in the upwind atmosphere.

Chrysotile accounts for some 90% to 95% of all the asbestos used worldwide. Scientific evidences have shown that asbestos (including chrysotile) exposure is associated with increased rates of lung cancer, asbestosis, and mesothelioma. However, molecular mechanisms underlying the toxicity effects of chrysotile are not clear. This study evaluated the oxidative stress in chronic lung toxicity caused by the intratracheal instillation (IT) of four kinds China representative chrysotile once a month for 12 months in Wistar rats. These results indicated that chrysotile exposure led to an obvious increase in lung mass and slowed the growth of body mass. Inflammation and fibrosis were observed by hematoxylin-eosin (HE) staining. Exposure to chrysotile significantly increased the accumulation of reactive oxygen species (ROS) and the level of lipid peroxidation and decreased antioxidant capacity in lung tissues. Furthermore, 1–6-month chrysotile exposure activated heme oxygenase-1 (HO-1) and heat shock protein 70 (HSP70) expression, whereas 12-month exposure caused significant decreases of two-factor expression levels in XK and MN groups when compared to negative control group. Therefore, our results suggested that chronic chrysotile pulmonary injury in Wistar rats is triggered by oxidative damage. Meanwhile, the oxidative damage of MN and XK was stronger than that of SSX and AKS, and the difference of oxidative damage in four chrysotile could have been brought by its properties, morphology, chemical composition, and particle size. With all the above mentioned in view, we hope that the revealed data in the experiment could contribute to the progress of further researches on the toxicity and mechanism of chrysotile.