Construction workers on highway rehabilitation projects can be exposed to a combination of traffic- and construction-related emissions. To assess the personal exposure a worker experiences, a portable battery-operated Air Quality Device (AQD) was utilised to measure emissions during normal construction operations of a major road rehabilitation project. Emissions measured were nitrogen dioxide (NO₂), Total Volatile Organic Compounds (TVOCs) and Particulate Matter (PM₁₀, PM₂.₅, and PM₁). The objective of the paper is to document the hazardous emissions that construction workers may be exposed to and allow for a basis of informed decision making to mitigate the risks of a road construction project. Most critically, this article is designed to raise awareness of the potential impact to a worker's wellbeing as well as highlight the need for further research. Through statistical analysis, asphalt paving was identified as the most hazardous activity in terms of exposure relative to other activities. This activity was further assessed using discrete-time Markov chain Monte Carlo simulations with results indicating a high probability that workers may be exposed to greater hazardous emission concentrations than measured. Limiting the distance to the source of emissions, large-scale use of warm-mix asphalt and reducing the idling times of construction vehicles were identified as practical mitigation measures to reduce exposure and aid in achieving zero-harm objectives. Finally, it is found that males are more susceptible to long-term implications of hazardous emission inhalation and should be more aware if the scenarios they might work in expose them to this.

Rehabilitation is often used to mitigate adverse effects of oil spills on wildlife. With an increase in production of alternatives to conventional crude oil such as diluted bitumen (dilbit), emergency spill responders and wildlife rehabilitators need information regarding the health and survival of free-ranging vertebrates exposed to dilbit under natural conditions. In 2010, one of the largest freshwater oil spills in the United States occurred in the Kalamazoo River in Michigan, when over 3.2 million liters of spilled dilbit impacted 56 km of riverine habitat. During 2010 and 2011 cleanup efforts, thousands of northern map turtles (Graptemys geographica) were captured from oiled stretches of the river, cleaned, rehabilitated, and released. We conducted extensive mark-recapture surveys in 2010, 2011, and 2018–2021, and used this dataset to evaluate the monthly survival probability of turtles 1–14 months post-spill and 8–11 years post-spill based on whether turtles were temporarily rehabilitated and released, overwintered in captivity and then released, or were released without rehabilitation. We found that rehabilitated or overwintered turtles had a higher probability of survival 1–14 months post-spill than non-rehabilitated turtles; however, 8–11 years post-spill the among-group differences in monthly survival probability had become negligible. Additionally, following the oil spill in 2010, nearly 6% of northern map turtles were recovered dead, died during rehabilitation, or suffered injuries that precluded release back into the wild. Our results demonstrate that exposure to dilbit in free ranging turtles causes direct mortality, while effort spent on the capture and rehabilitation of oiled freshwater turtles is important as it increases monthly survival 1–14 months post-spill.

Mecoprop-P (MCPP-P) is an auxin herbicide which has been used against dicotyledonous weed plants since the 1980s. While fate and monitoring data of MCPP-P in the aquatic environment revealing concentrations up to 103 μg/L in freshwaters are well documented, only very few toxicity data and no studies with dicotyledonous macrophytes have been published in open literature so far. To fill up this essential data gap, a microcosm study was conducted in order to test the sensitivity of nine dicotyledonous and one Ceratophyllales macrophyte species. The plant species were exposed to seven MCPP-P concentrations ranging from 8 to 512 μg/L for 21/22 days in one microcosm per concentration, and two further microcosms served as controls. Plant preparation was adapted to each species and endpoints were measured to calculate growth rates. Data were generated to obtain effect concentrations (ECX) which then were used to construct species sensitivity distribution curves (SSD). Eight species proved to be sensitive to MCPP-P in the tested concentration range with EC₅₀ values ranging from 46.9 μg/L for Ranunculus aquatilis to 656.4 μg/L MCPP-P for Ludwigia repens. Taking the EC₅₀ values of this study and published data for autotrophic organisms into account, a hazard concentration (HC₅) of 2.7 μg/L was derived from the SSD curve, while an SSD curve without dicotyledonous macrophytes resulted in an about 100 times higher HC₅ (360.8 μg/L MCCP-P). This confirms that a re-evaluation for old auxin herbicides by including dicotyledonous test species into the environmental risk assessment may be indicated. Furthermore, the use of MCPP-P in bitumen felts as protection against rooting by plants is not in the focus of any risk regulation so far. This application, however, can lead to high run-off concentrations that can enter surface waters easily, exceeding the new regulatory acceptable concentration values.

The Peace-Athabasca Delta (PAD) receives a mixture of hydrocarbons from biogenic, pyrogenic, and petrogenic processes. Source apportionment in the PAD has focussed on polycyclic aromatic compounds (PACs), which are ubiquitous in the environment and susceptible to weathering. In contrast, petroleum biomarkers of terpanes, hopanes, and steranes are degradation-resistant organic compounds found uniquely in petroleum products that can identify the input and origin of petrogenic hydrocarbons (PHCs). We provide an analysis of environmentally-relevant PHCs (including n-alkanes, PACs, and petroleum biomarkers) in surficial sediments of strategically selected lakes in the Athabasca and Peace deltas and adjacent boreal uplands. Alkanes were found to be predominately biogenic in all lakes. PAC sources were identified as wood combustion in the upland boreal lakes, a mixture of petrogenic and pyrogenic combustion in two closed-drainage lakes in the Peace Delta, and predominately petrogenic in two flood-prone Athabasca Delta lakes. Using multivariate analyses, raw Alberta oil sands were identified as a potential source of PHCs to the two flood-prone lakes in the Athabasca Delta. Biomarkers of terpanes and hopanes were identified in the Peace Delta and boreal uplands, likely from bitumen and transported atmospherically. These findings validate the use of petroleum biomarkers as tracers for bituminous sands in surficial lake sediments and their potential use in paleolimnological investigations at the PAD to improve understanding of relative roles of natural and industrial processes on far-field deposition of PHCs.

A wide variety of sampling techniques and strategies are needed to analyze polycyclic aromatic compounds (PACs) and interpret their distributions in various environmental media (i.e., air, water, snow, soils, sediments, peat and biological material). In this review, we provide a summary of commonly employed sampling methods and strategies, as well as a discussion of routine and innovative approaches used to quantify and characterize PACs in frequently targeted environmental samples, with specific examples and applications in Canadian investigations. The pros and cons of different analytical techniques, including gas chromatography – flame ionization detection (GC-FID), GC low-resolution mass spectrometry (GC-LRMS), high performance liquid chromatography (HPLC) with ultraviolet, fluorescence or MS detection, GC high-resolution MS (GC-HRMS) and compound-specific stable (δ¹³C, δ²H) and radiocarbon (Δ¹⁴C) isotope analysis are considered. Using as an example research carried out in Canada’s Athabasca oil sands region (AOSR), where alkylated polycyclic aromatic hydrocarbons and sulfur-containing dibenzothiophenes are frequently targeted, the need to move beyond the standard list of sixteen EPA priority PAHs and for adoption of an AOSR bitumen PAC reference standard are highlighted.

Bitumen recovery from oil sands in northeastern Alberta, Canada produces large volumes of tailings, which are deposited in mining areas that must be reclaimed upon mine closure. A new technology of non-segregated tailings (NST) developed by Canadian Natural Resources Limited (CNRL) was designed to accelerate the process of oil sands fine tailings consolidation. However, effects of these novel tailings on plants used for the reclamation of oil sands mining areas remain to be determined. In the present study, we investigated the effects of NST on seedlings of three species of plants commonly planted in oil sands reclamation sites including paper birch (Betula papyrifera), white spruce (Picea glauca) and green alder (Alnus viridis). In the controlled-environment study, we grew seedlings directly in NST and in the two types of reclamation soils with and without added NST and we measured seedling growth, gas exchange parameters, as well as tissue concentrations of selected elements and foliar chlorophyll. White spruce seedlings suffered from severe mortality when grown directly in NST and their needles contained high concentrations of Na. The growth and physiological processes were also inhibited by NST in green alder and paper birch. However, the addition of top soil and peat mineral soil mix to NST significantly improved the growth of plants, possibly due to a more balanced nutrient uptake. It appears that NST may offer some advantages in terms of site revegetation compared with the traditional oil sands tailings that were used in the past. The results also suggest that, white spruce may be less suitable for planting at reclamation sites containing NST compared with the two studied deciduous tree species.

The aim of this study was to investigate the long-term effects of a short exposure to natural sediments within the Athabasca oil sand formation to critical stages of embryo-larval development in fathead minnows (Pimephales promelas). Three different sediments were used: Ref sediment from the upper Steepbank River tested at 3 g/L (containing 12.2 ng/g ∑PAHs), and two bitumen-rich sediments tested at 1 and 3 g/L; one from the Ells River (Ells downstream, 6480 ng/g ∑PAHs) and one from the Steepbank River (Stp downstream, 4660 ng/g ∑PAHs). Eggs and larvae were exposed to sediments for 21 days, then transferred to clean water for a 5-month grow-out and recovery period. Larval fish had significantly decreased survival after exposure to 3 g/L sediment from Stp downstream, and decreased growth (length and weight at 16 days post hatch) in Ells and Stp downstream sediments at both 1 and 3 g/L. Decreased tail length was a sensitive endpoint in larval fish exposed to Ells and Stp downstream sediments for 21 days compared to Ref sediment. After the grow-out in clean water, all growth effects from the bitumen-containing sediments recovered, but adult fish from Stp downstream 3 g/L sediment had significant increases in jaw deformities. The study shows the potential for fish to recover from the decreased growth effects caused by sediments containing oil sands-related compounds, but that some effects of the early-life sediment exposure occur later on in adult fish.

Sealcoat is an emulsified coating product applied to asphalt to protect against surface weathering. Sealcoat products contain coal-tar (CT) or petroleum-derived residues and are a recognized source of polycyclic aromatic hydrocarbons (PAHs) in urban areas. Although the toxicity of urban runoff from CT-sealed asphalt is established, chemical characterization has focused more on PAHs and alkylated derivatives and less on polar transformation products. In this study, solid-phase extraction (SPE) was used to concentrate dissolved (<0.2 μm) species in runoff collected from asphalt surfaces sealed with CT pitch or steam-cracked petroleum (SCP) residues. CT-sealed surfaces released a 20-fold greater concentration of SPE-extractable compounds in runoff compared to SCP-sealed surfaces. Representative compounds were sorted into four groups: nitrogen heterocycles (azaarenes) and other oxygen- and sulfur-containing species (N HET); hydroxylated N heterocycles (hydroxylated N HET); the nonionic surfactant 2,4,7,9-tetramethyl-5-decyne-4,7-diol (TMDD); and styrene-acrylonitrile polymer byproducts (SAN Trimer). Species concentrations and weathering-related disappearance behavior differed among the four subgroups. While hydroxylated N HET concentrations decreased by 94% in runoff from CT-sealed surfaces 60 h after sealcoat application, SAN Trimer concentrations in CT and SCP runoff increased over time as polymerization progressed, illustrating the complex changes the chemicals in sealcoat undergo as it cures under environmentally-relevant conditions. Overall, this study shows that urban runoff collected from CT-sealed and SCP-sealed asphalt surfaces is a potential source of water-soluble contaminants with unknown long-term ecotoxicological effects to aquatic systems.

In order for Alberta's thick bitumen to be transported through pipelines, condensates are added creating a diluted bitumen (dilbit) mixture. Recent pipeline expansion projects have generated concern about potential dilbit spills on aquatic wildlife health. Studies have suggested that polycyclic aromatic compounds (PACs) are toxic to aquatic vertebrates and could potentially also interfere with their endocrine system. The research objectives of this study were to investigate the toxicity of dilbit to developing frog embryos and to identify the molecular mechanisms of action involved. Fertilized embryos of Western clawed frog (Silurana tropicalis) were exposed for 72 h to water accommodated fractions (WAF; 0.7–8.9 μg/L TPACs) and chemically-enhanced WAFs (CEWAF; 0.09–56.7 μg/L TPACs) of Access Western Blend (AWB) and Cold Lake Blend (CLB) dilbits. Both dilbit's CEWAFs significantly increased embryonic mortality and malformation incidence in the highest treatments tested, while WAF treatments led to no visible toxic effects. Increases of the cytochrome P450 1A (cyp1a) mRNA levels were observed for all WAF and CEWAF dilbit treatments suggesting that phase I detoxification is activated in the dilbit-exposed larvae. When exposed to PAC concentrations ranging from 0.09 to 8.9 μg/L, the frogs displayed no observable malformations, but expressed significant increases of cyp1a mRNA levels (2- to 25-fold; indicating a suitable biomarker of exposure); however, when concentrations were of 46.6 μg/L or higher, both malformed frog phenotype and induction of cyp1a mRNA level (>250-fold) were measured (indicating a suitable biomarker of response). The expression of several genes related to cellular detoxification and endocrine disruption were also measured, but were not significantly altered by the treatments. In sum, cyp1a mRNA level is a highly sensitive endpoint to measure subtle molecular changes induced by PAC exposure in the frog embryos and larvae, and data suggest that PAC concentration higher than 46 μg/L would be toxic to the developing S. tropicalis.

Urban stormwater is a major source of chemical pollution to receiving waters. Anthropogenic materials in the built environment can be an important source of chemicals to stormwater runoff. Roofing materials can leach significant amounts of metals, which vary over the life of the roof. We report concentrations of three metals (As, Cu, Zn) leaching into runoff from experimental panels of 14 roofing materials over 4.5 years of weathering. Ten roofing materials leached metals. Several leached >10 ppb during one or more study periods. The most common correlate with metal concentration was panel age, followed by precipitation amount. Extrapolating from these observations, we estimated the loading of metals from each roofing material during the first 10 years following installation. Eight materials were predicted to leach metals above background at the end of the 10 years. In combination with information on the prevalence of different roofing materials in the Puget Sound region of the Pacific Northwest, we estimated the relative amount of metals contributed from roofing materials in this basin. Most arsenic and copper was estimated to be contributed by residential roofing; nearly all arsenic from wood shakes manufactured with copper chromated arsenic, and copper contributed mainly from treated wood shakes followed by copper granule-containing asphalt shingles. Most zinc was estimated to be contributed by commercial roofs, including Zincalume and painted metal roofs. Overall our data shows that roofing materials can be an important long-term source of As, Cu, and Zn to stormwater runoff. Compared with atmospheric deposition, roof materials were a significant source, particularly of As and Cu. To get a complete picture of metals sourced from buildings, there is a need to study whole roof systems, including gutters, downspouts, and HVAC systems, as well as metals contributed from homeowner-applied treatments to their roofs.