Уточнить поиск
Результаты 1-10 из 635
Biomimetically Generated Nanoparticles in Boosting the Performance of Microbial Fuel Cells
2021
S. A. Abbasi, Tabassum-Abbasi | Pratiksha Patnaik
Studies are presented in the context of the past attempts at finding nanocatalysts that can boost the performance of microbial fuel cells (MFCs) ─ in terms of waste treatment and energy generation. Given the great potential of biomimetically synthesized nanoparticles (BMNPs) in providing less expensive and more environmentally friendly alternatives to NPs synthesized by physical and chemical methods, as well as a near-total lack of previous work in this area, the current research was undertaken. Effect of gold and silver nanoparticles (NPs), synthesized biomimetically using five freely available weeds, was assessed as catalysts in the MFCs. In all cases, the nanoparticles were seen to enhance the coulombic efficiency (reflective of the reduction in the waste’s organic carbon load), maximum attainable power density, and overall energy yield of the MFCs by >200% relative to the uncatalyzed MFCs. Gold nanoparticles were more effective than silver nanoparticles by ≥ 20%. The results reveal that biomimetically synthesized NPs can be highly effective in reducing the operational costs as well as ecological footprints of MFCs and further work should be focused on NPs of non-precious metals.
Показать больше [+] Меньше [-]Remediation techniques for uranium removal from polluted environment – Review on methods, mechanism and toxicology
2022
Akash, S. | Sivaprakash, Baskaran | Raja, V.C Vadivel | Rajamohan, Natarajan | Muthusamy, Govarthanan
Uranium, a radionuclide, is a predominant element utilized for speciality requirements in industrial applications, as fuels and catalyst. The radioactive properties and chemical toxicity of uranium causes a major threat to the ecosystem. The hazards associated with Uranium pollution includes the cancer in bones, liver, and lungs. The toxicological properties of Uranium are discussed in detail. Although there are many methods to eliminate those hazards, this research work is aimed to describe the application of bioremediation methods. Bioremediation methods involve elimination of the hazards of uranium, by transforming into low oxidation form using natural microbes and plants. This study deeply elucidates the methods as bioleaching, biosorption, bioreduction and phytoremediation. Bioleaching process involves bio-oxidation of tetravalent uranium when it gets in contact with acidophilic metal bacterial complex to obtain leach liquor. In biosorption, chitin/chitosan derived sorbents act as chelators and binds with uranium by electrostatic attraction. Bio reduction employs a bacterial transformation into enzymes which immobilize and reduce uranium. Phytoremediation includes phytoextraction and phytotranslocation of uranium through xylems from soil to roots and shoots of plants. The highest uranium removal and uptake reported using the different methods are listed as follows: bioleaching (100% uranium recovery), biosorption (167 g kg⁻¹ uranium uptake), bioreduction (98.9% uranium recovery), and phytoremediation (49,639 mg kg⁻¹ uranium uptake). Among all the techniques mentioned above, bioleaching has been proved to be the most efficient for uranium remediation.
Показать больше [+] Меньше [-]Valorization of synthetic textile waste using CO2 as a raw material in the catalytic pyrolysis process
2021
Kwon, Dohee | Yi, So-ra | Jung, Sungyup | Kwon, Eilhann E.
Since an invention of synthetic fibers (textiles), our life quality has been improved. However, the cumulative production and disposal of them have perceived as significant since they are not biodegradable and hard to be upcycled/recycled. From washing textiles, microplastics are released into the environment, which are regarded as emerging contaminants. As a means for source reduction of microplastics, this study proposed a rapid disposal platform for waste textiles (WTs), converting them into value-added products. To this end, catalytic pyrolysis of WT was studied. To offer more environmentally sound process, CO₂ was used as a raw material for WT pyrolysis. Thermal cracking of WT led to the production of syngas and CH₄ under the CO₂ environment. CO₂ resulted in additional CO production via gas phase reaction with volatile compounds evolved from pyrolysis of WT. To expedite the reaction kinetics for syngas formation, catalytic pyrolysis was done over Co-based catalyst. Comparing to non-catalytic pyrolysis, CO₂-assisted catalytic pyrolysis had 3- and 8-times higher production of H₂ and CO, respectively. This process also suppressed catalyst deactivation, converting more than 80 wt% of WT into syngas and CH₄. The more generation of CO from the use of CO₂ as a raw material offers an effective means to minimize the formations of harmful chemical species, such as benzene derivatives and polycyclic aromatic hydrocarbons.
Показать больше [+] Меньше [-]Size-activity threshold of titanium dioxide-supported Cu cluster in CO oxidation
2021
Khan, Wasim Ullah | Yu, Iris K.M. | Sun, Yuqing | Polson, Matthew I.J. | Golovko, Vladimir | Lam, Frank L.Y. | Ogino, Isao | Tsang, Daniel C.W. | Yip, Alex C.K.
Development of non-noble metal cluster catalysts, aiming at concurrently high activity and stability, for emission control systems has been challenging because of sintering and overcoating of clusters on the support. In this work, we reported the role of well-dispersed copper nanoclusters supported on TiO₂ in CO oxidation under industrially relevant operating conditions. The catalyst containing 0.15 wt% Cu on TiO₂ (0.15 CT) exhibited a high dispersion (59.1%), a large specific surface area (381 m²/gCᵤ), a small particle size (1.77 nm), and abundant active sites (75.8% Cu₂O). The CO oxidation activity measured by the turnover frequency (TOF) was found to be enhanced from 0.60 × 10⁻³ to 3.22 × 10⁻³ molCO·molCᵤ⁻¹·s⁻¹ as the copper loading decreased from 5 to 0.15 wt%. A CO conversion of approximately 60% was still observed in the supported cluster catalyst with a Cu loading of 5 wt% at 240 °C. No deactivation was observed for catalysts with low copper loading (0.15 and 0.30 CT) after 8 h of time-on-stream, which compares favorably with less stable Au cluster-based catalysts reported in the literature. In contrast, catalysts with high copper loading (0.75 and 5 CT) showed deactivation over time, which was ascribed to the increase in copper particle size due to metal cluster agglomeration. This study elucidated the size-activity threshold of TiO₂-supported Cu cluster catalysts. It also demonstrated the potential of the supported Cu cluster catalyst at a typical temperature range of diesel engines at light-load. The supported Cu cluster catalyst could be a promising alternative to noble metal cluster catalysts for emission control systems.
Показать больше [+] Меньше [-]Green synthesis, characterization and applications of silver nanoparticle mediated by the aqueous extract of red onion peel
2021
Tan Sian Hui Abdullah, Hannan Safiyyah | Aqlili Riana Mohd Asseri, Siti Nur | Khursyiah Wan Mohamad, Wan Nurul | Kan, Su-Yin | Azmi, Alyza Azzura | Yong Julius, Fu Siong | Chia, Poh Wai
This manuscript describes the reuse of biowaste for the biosynthesis of silver nanoparticles (AgNPs) and their applications. In particular, we hypothesized that the phytochemicals in the onion peels could act as reductant for silver nanoparticles syntheses. AgNO₃ solution (1 mmol) was added dropwise to an aqueous solution of onion peel extract in 3:7 ratio. The reaction mixture was subjected to heating at 90 °C for about 30 min. During the synthesis of the AgNPs, the change of the colour of solution was observed. The AgNPs solution was centrifuged to obtain the two layers, which consists of clear solution and solid layers at 12000 rpm for 30 min. The precipitate was filtered and was re-dispersed in deionised water (25 mL). The solution was centrifuged again to obtain the purified AgNPs. Subsequently, this solution was freeze dried for 48 h to afford the powdered AgNPs. In this work, the structure of the AgNPs were synthesized in spherical shape, with an average size of 12.5 nm observed in the Transmission electron microscopy (TEM) analysis. For catalytic application, the synthesized AgNPs could be applied as green catalyst to promote Knoevenagel and Hantzsch reactions. In most cases, the desired products were obtained in satisfactory yields. In addition, the AgNPs were found to be recyclable for the subsequent reactions. After five successive runs, the average isolated yields for both transformations were recorded to be 91% (Knoevenagel condensation) and 94% (Hantzsch reaction), which indicated that the existing AgNPs could apply as green catalyst in the field of organic synthesis. Furthermore, the AgNPs also showed satisfactory result in antioxidant activity. The current results indicate that the AgNPs can act as alternative antioxidant agent and green catalyst in mediating organic transformations.
Показать больше [+] Меньше [-]Visible light driven exotic p (CuO) - n (TiO2) heterojunction for the photodegradation of 4-chlorophenol and antibacterial activity
2021
Gnanasekaran, Lalitha | Pachaiappan, Rekha | Kumar, P Senthil | Hoang, Tuan K.A. | Rajendran, Saravanan | Durgalakshmi, D. | Soto-Moscoso, Matias | Cornejo-Ponce, Lorena | Gracia, F.
The treatment of industrial waste and harmful bacteria is an important topic due to the release of toxins from the industrial pollutants that damage the water resources. These harmful sources frighten the life of every organism which was later developed as the carcinogenic and mutagenic agents. Therefore, the current study focuses on the breakdown or degradation of 4-chlorophenol and the antibacterial activity against Escherichia coli (E. coli). As a well-known catalyst, pure titanium-di-oxide (TiO₂) had not shown the photocatalytic activity in the visible light region. Hence, band position of TiO₂ need to be shifted to bring out the absorption in the visible light region. For this purpose, the n-type TiO₂ nanocrystalline material's band gap got varied by adding different ratios of p-type CuO. The result had appeared in the formation of p (CuO) – n (TiO₂) junction synthesized from sol-gel followed by chemical precipitation methods. The optical band gap value was determined by Kubelka-Munk (K-M) plot through UV–Vis diffusive reflectance spectroscopy (DRS). Further, the comprehensive mechanism and the results of photocatalytic and antibacterial activities were discussed in detail. These investigations are made for tuning the TiO₂ catalyst towards improving or eliminating the existing various environmental damages.
Показать больше [+] Меньше [-]Yeast biomass-induced Co2P/biochar composite for sulfonamide antibiotics degradation through peroxymonosulfate activation
2021
Peng, Yuanyuan | Tong, Wenhua | Xie, Yi | Hu, Wanrong | Li, Yonghong | Zhang, Yongkui | Wang, Yabo
Advanced oxidation processes (AOPs) based on peroxymonosulfate (PMS) activation have attracted increasing attention in recent years for organic pollutants removal. Herein, we put forward a facile method to form cobalt phosphide/carbon composite for PMS activation. Combining impregnation approach with pyrolysis treatment enabled the formation of Co₂P/biochar composites using baker’s yeast and Co²⁺ as precursors. The as-synthesized products exhibited excellent catalytic activity for sulfamethoxazole (SMX) degradation over the pH range 3.0–9.0 b y activating PMS. For example, 100% of SMX (20 mg L⁻¹) removal was achieved in 20 min with catalyst dosage of 0.4 g L⁻¹ and PMS loading of 0.4 g L⁻¹. Near zero Co²⁺ leaching was observed during catalytic reaction, which remarkably lowered the toxic risk of transition metal ion in water. Meanwhile, the reusability of catalyst could be attained by thermal treatment. SMX degradation intermediates were identified by liquid chromatography-mass spectrometry (LC-MS), which facilitated the proposal of possible SMX degradation pathways. Ecological Structure Activity Relationships (ECOSAR) analysis indicated that SMX degradation intermediates may not pose ecological toxicity to the environment. Further investigation verified that Co₂P/biochar composites could set off PMS activation not only for the degradation of SMX but also for other sulfonamides. In this study, we not only developed a facile method of utilizing environmental-benign biomass for transition metal phosphide/carbon composite formation, but also achieved highly efficient antibiotic elimination by PMS-based AOP.
Показать больше [+] Меньше [-]In situ catalytic reforming of plastic pyrolysis vapors using MSW incineration ashes
2021
Ahamed, Ashiq | Liang, Lili | Chan, Wei Ping | Tan, Preston Choon Kiat | Yip, Nicklaus Tze Xuan | Bobacka, Johan | Veksha, Andrei | Yin, Ke | Lisak, Grzegorz
The valorization of municipal solid waste incineration bottom and fly ashes (IBA and IFA) as catalysts for thermochemical plastic treatment was investigated. As-received, calcined, and Ni-loaded ashes prepared via hydrothermal synthesis were used as low-cost waste-derived catalysts for in-line upgrading of volatile products from plastic pyrolysis. It was found that both IBA and air pollution control IFA (APC) promote selective production of BTEX compounds (i.e., benzene, toluene, ethylbenzene, and xylenes) without significantly affecting the formation of other gaseous and liquid species. There was insignificant change in the product distribution when electrostatic precipitator IFA (ESP) was used, probably due to the lack of active catalytic species. Calcined APC (C-APC) demonstrated further improvement in the BTEX yield that suggested the potential to enhance the catalytic properties of ashes through pre-treatment. By comparing with the leaching limit values stated in the European Council Decision, 2003/33/EC for the acceptance of hazardous waste at landfills, all the ashes applied remained in the same category after the calcination and pyrolysis processes, except the leaching of Cl⁻ from the ESP, which was around the borderline. Therefore, the use of ashes in catalytic reforming application do not significantly deteriorate their metal leaching behavior. Considering its superior catalytic activity towards BTEX formation, C-APC was loaded with Ni at 15 and 30 wt%. The Ni-loading favored an increase in overall oil yield, while reducing the gas yield when compared to the benchmark Ni loaded ZSM catalyst. However, Ni addition also caused the formation of more heavier hydrocarbons (C20–C35) that would require post-treatment to recover favorable products like BTEX.
Показать больше [+] Меньше [-]A facile synthesis of metal ferrites and their catalytic removal of toxic nitro-organic pollutants
2021
Ramu, A.G. | Salla, Sunitha | Chandrasekaran, Sivaraman | Silambarasan, P. | Gopi, S. | Seo, Seung-yoon | Yun, Kyusik | Choi, Dongjin
Nitrocompounds are the major prime water contaminants. In this investigative study, toxic nitrocompounds (4-nitrophenol, 2,4-dinitrophenol, 2,4,6-trinitrophenol) were removed by using magnetic CuFe₂O₄, CoFe₂O₄, and NiFe₂O₄ material systems. The metal ferrites were synthesized through hydrothermal method and also followed with calcination process. The properties of metal ferrites were confirmed through using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and field emission scanning electron microscopy (FE-SEM) studies and results there on were presented. For the first time, the synthesized CuFe₂O₄, CoFe₂O₄, and NiFe₂O₄ material systems were used for the reduction of 4-nitrophenol (NP), 2,4-dinitrophenol (DNP), and 2,4,6-trinitrophenol (TNP) in aqueous medium. The UV–visible spectrometry was employed to monitor the removal of nitro compounds and formation of aminophenol. Among, the three catalysts, the CuFe₂O₄ displayed excellent removal activity for nitrocompounds. The CuFe₂O₄ nanoparticles completely removed the NP, DNP and TNP within 2, 5, 10 min, respectively. The NP reduction reaction follows the pseudo-first-order kinetics. Further, the investigated and proposed CuFe₂O₄, catalyst has given and demonstrated excellent kinetic rate constants 0.990, 0.317, 0.184 min⁻¹ for 4-NP, DNP and TNP respectively, which was very fast kinetic than the already published reports. Also, the aminophenol formation was confirmed for the above mentioned and select nitrocompounds. The obtained results confirm suggest that CuFe₂O₄ nanoparticles based material system could be one of the promising catalysts for nitro compounds removal process.
Показать больше [+] Меньше [-]Co-oxidative removal of arsenite and tetracycline based on a heterogeneous Fenton-like reaction using iron nanoparticles-impregnated biochar
2021
Fu, Dun | Kurniawan, Tonni Agustiono | Li, Heng | Wang, Haitao | Wang, Yuanpeng | Li, Qingbiao
A highly efficient, eco-friendly and relatively low-cost catalyst is necessary to tackle bottlenecks in the treatment of industrial wastewater laden with heavy metals and antibiotic such as livestock farm and biogas liquids. This study investigated co-oxidative removal of arsenite (As(III)) and tetracycline (TC) by iron nanoparticles (Fe NP)-impregnated carbons based on heterogeneous Fenton-like reactions. The composites included Fe NP@biochar (BC), Fe NP@hydrochar (HC), and Fe NP@HC-derived pyrolysis char (HDPC). The functions of N and S atoms and the loading mass of the Fe NP in the Fe NP@BC in heterogeneous Fenton-like reactions were studied. To sustain its cost-effectiveness, the spent Fe NP@BC was regenerated using NaOH. Among the composites, the Fe NP@BC achieved an almost complete removal of As(III) and TC under optimized conditions (1.0 g/L of dose; 10 mM H₂O₂; pH 6; 4 h of reaction; As(III): 50 μM; TC: 50 μM). The co-oxidative removal of As(III) and TC by the Fe NP@ BC was controlled by the synergistic interactions between the Fe NPs and the active N and S sites of the BC for generating reactive oxygen species (ROS). After four consecutive regeneration cycles, about 61 and 95% of As(III) and TC removal were attained. This implies that the spent carbocatalyst still has reasonable catalytic activities for reuse. Overall, this suggests that adding technological values to unused biochar as a carbocatalyst like Fe NP@BC was promising for co-oxidative removal of As(III) and TC from contaminated water.
Показать больше [+] Меньше [-]