Уточнить поиск
Результаты 1-10 из 12
A multivariate approach of changes in filamentous, nitrifying and protist communities and nitrogen removal efficiencies during ozone dosage in a full-scale wastewater treatment plant
2019
Barbarroja, Paula | Zornoza, Andrés | Aguado, Daniel | Borrás, Luis | Alonso, José Luis
The application of low ozone dosage to minimize the problems caused by filamentous foaming was evaluated in two bioreactors of an urban wastewater treatment plant. Filamentous and nitrifying bacteria, as well as protist and metazoa, were monitored throughout a one-year period by FISH and conventional microscopy to examine the effects of ozone application on these specific groups of microorganisms. Multivariate data analysis was used to determine if the ozone dosage was a key factor determining the low carbon and nitrogen removal efficiencies observed throughout the study period, as well as to evaluate its impact on the biological communities monitored. The results of this study suggested that ozonation did not significantly affect the COD removal efficiency, although it had a moderate effect on ammonia removal efficiency. Filamentous bacteria were the community most influenced by ozone (24.9% of the variance explained by ozone loading rate), whilst protist and metazoa were less affected (11.9% of the variance explained). Conversely, ozone loading rate was not a factor in determining the nitrifying bacterial community abundance and composition, although this environmental variable was correlated with ammonia removal efficiency. The results of this study suggest that different filamentous morphotypes were selectively affected by ozone.
Показать больше [+] Меньше [-]PM2.5 aggravates the lipid accumulation, mitochondrial damage and apoptosis in macrophage foam cells
2019
Liu, Jiangyan | Liang, Shuang | Du, Zhou | Zhang, Jingyi | Sun, Baiyang | Zhao, Tong | Yang, Xiaozhe | Shi, Yanfeng | Duan, Junchao | Sun, Zhiwei
Epidemiological evidence showed that the particulate matter exposure is associated with atherosclerotic plaque progression, which may be related to foam cell formation, but the mechanism is still unknown. The study was aimed to investigate the toxic effects and possible mechanism of PM2.5 on the formation of macrophage foam cells induced by oxidized low density lipoprotein (ox-LDL). Results showed that PM2.5 induced cytotoxicity by decreasing the cell viability and increasing the LDH level in macrophage foam cells. PM2.5 aggravated the lipid accumulation in ox-LDL-stimulated macrophage RAW264.7 within markedly increasing level of intracellular lipid by Oil red O staining. The level of ROS increased obivously after co-exposure to PM2.5 and ox-LDL than single exposure group. In addition, serious mitochondrial damage such as the mitochondrial swelling, cristae rupturing and disappearance were observed in macrophage foam cells. The loss of the mitochondrial membrane potential (MMP) further exacerbated the mitochondrial damage in PM2.5-induced macrophage foam cells. The apoptotic rate increased more severely via up-regulated protein level of Bax, Cyt C, Caspase-9, Caspase-3, and down-regulated that of Bcl-2, indicating that PM2.5 activated the mitochondrial-mediated apoptosis pathway. In summary, our results demonstrated that PM2.5 aggravated the lipid accumulation, mitochondrial damage and apoptosis in macrophage foam cells, suggesting that PM2.5 was a risk factor of atherosclerosis progression.
Показать больше [+] Меньше [-]pH-Based Strategies for an Efficient Addition of H2O2 During Ozonation to Improve the Mineralisation of Two Contaminants with Different Degradation Resistances
2018
de Luis, Ana | Lombraña, José Ignacio
Ozonation is an efficient process for the primary degradation of most substrates but not for their mineralisation. In this work, the ozonation enhanced with the addition of H₂O₂ was studied for two substrates with very different oxidation resistances: the dye rhodamine 6G (R6G) and the surfactant linear alkylbenzene sulfonate (LAS). With O₃ only, the primary degradation of R6G was completed in less than 10 min but its TOC removal only reached 45% in 1 h. By adding H₂O₂, TOC removal was increased to 70% with a molar ratio (mol H₂O₂/mol substrate) of 10. The analysis of pH decrease served to define the specific basicity loss (SBL). The optimum conditions for the R6G mineralisation were found to be associated with a SBL value between 1 and 10 ((min/g)/L)⁻¹, through an adequate addition of H₂O₂. Moreover, in the case of LAS, the addition of H₂O₂ for a greater efficiency should occur after the foaming period, above all formed at acid pH. LAS degradation was also considerably improved, and the optimum for primary degradation achieved in 10 min with a TOC removal of over 65% with a molar ratio (mol H₂O₂/mol substrate) of 20. ᅟ Graphical Abstract
Показать больше [+] Меньше [-]Effects of detergents on natural ecosystems and wastewater treatment processes: a review
2019
Mousavi, Seyyed Alireza | Khodadoost, Farank
Among the different contaminants, detergent as an important pollutant has serious risks to natural ecosystems. Furthermore, detergents can pass into the wastewater treatment plants and have bad effect on their performance. They are part of human life and consumed for different aims especially hygienic purposes. Therefore, detergent components can enter to soil and water bodies from different sources. Detergents affect fauna and flora, and they have direct and indirect effects on ecosystems. Eutrophication, foaming, and altering parameters such as temperature, salinity, turbidity, and pH are more important, and their effects need to be managed and controlled. Researchers confirmed that aerobic processes are able to degrade the most of detergents but anaerobic degradation is not possible because of restricted metabolic pathways and toxicity of them. Therefore, production of environment-friendly detergent is an important issue around the world. Graphical abstract
Показать больше [+] Меньше [-]Activation of persulfate by CuO-sludge-derived carbon dispersed on silicon carbide foams for odorous methyl mercaptan elimination: identification of reactive oxygen species
2020
He, Huanjunwa | Hu, Lingling | Zeng, Jiawei | Huang, Yajing | He, Chun | Zhang, Qing | Zhang, Feng | Shu, Dong
In this work, sludge-derived carbon (SC) was innovatively integrated with copper oxide (CuO) on macroporous silicon carbide foams to construct a distinctive catalyst (CuO/SC) with strong catalytic activity, which can effectively activate persulfate (PS) for the removal of methyl mercaptan (CH₃SH). The structure and morphology of CuO/SC were investigated by means of XRD, SEM, and EDS. The effects of initial pH values, copper contents, PS dosages, and flow rates on CH₃SH removal were also investigated. Under optimal condition, more than 90% of CH₃SH was removed by CuO/SC-PS combined system within 10-min reaction due to the synergistic function of CuO and SC. More importantly, on the basis of reactive species trapping and ESR spectroscopy, it is revealed that the responsible reactive species for catalytic CH₃SH composition were ·SO₄⁻, ·OH, ¹O₂, and ·O₂⁻ in CuO/SC-PS system. Finally, the possible PS activation scheme of CuO/SC samples was proposed.
Показать больше [+] Меньше [-]Protein extraction from excess sludge by alkali-thermal hydrolysis
2020
The protein in excess sludge can be extracted effectively by the alkali-thermal method, and the extracted protein can be used as a foaming agent and in other industrial raw materials to realize its resource utilization. In this paper, the factors influencing sludge protein extraction by the alkali-thermal method were optimized based on the protein extraction rate and the polypeptide content, which determine the foaming performance of the extracted protein. The results showed that the optimal conditions were a pH of 12, a temperature of 120 °C, a reaction time of 4 h, and a sludge moisture content of 92%. Under these optimized conditions, the extraction rate of protein and the concentration of polypeptides were 88.3% and 6599 mg/L, respectively. Additionally, the foaming performance of the extracted protein solution was tested, and the foamability and foam stability were close to 450% and 88.8%, respectively. Therefore, the sludge protein extracted by the alkali-thermal method can meet the relevant standards of foam extinguishing agents and concrete foaming agents in China. In addition, the dewatering performance of the hydrolyzed sludge was improved by 93.1%, which provided favorable conditions for the subsequent separation of the protein solution.
Показать больше [+] Меньше [-]Foam-forming bacteria in activated sludge effectively reduced by rotifers in laboratory- and real-scale wastewater treatment plant experiments
2017
Pajdak-Stós, Agnieszka | Kocerba-Soroka, Wioleta | Fyda, Janusz | Sobczyk, Mateusz | Fiałkowska, Edyta
Lecane inermis rotifers were shown to diminish sludge bulking due to their ability to ingest the filamentous bacteria in activated sludge. To determine if rotifers are also able to control branched actinomycetes, we investigated three other Lecane species (Monogononta). In a week-long experiment, only Lecane tenuiseta significantly reduced the density of Microthrix parvicella and Type 0092 filaments, but in a 2-week experiment, actinomycetes were significantly reduced by most of the tested monogonont rotifers: L. inermis, Lecane decipiens and Lecane pyriformis. Rotifers L. inermis originating from the mass culture were artificially introduced into real-scale wastewater treatment plant (WWTP) in two series. The WWTP was monitored for 1 year. Rotifer inoculation resulted in diminishing of M. parvicella and actinomycete abundance. The experiments showed that different species of rotifers vary in their effectiveness at limiting various types of filamentous organisms. This is the first report demonstrating that one of the most troublesome bacteria, branched actinomycetes, which cause heavy foaming in bioreactors, can be controlled by rotifers. Knowledge of the consumers of filamentous bacteria that inhabit activated sludge could help WWTP operators overcome bulking and foaming through environmentally friendly methods.
Показать больше [+] Меньше [-]Recycled gypsum board acted as a mineral swelling agent for improving thermal conductivity characteristics in manufacturing of green lightweight building brick
2019
Chiang, Kung-Yuh | Yen, Huei-Ru | Lu, Cheng-Han
Lightweight building bricks manufactured from non-hazardous residues incorporating mineral foaming agents have been successfully developed over past two decades. Very little information is available on recycling and reutilization of construction and demolition waste used as the pore foaming agent in manufacturing lightweight brick. In this research, the mineral swelling agent was gypsum board recycled from construction and demolition waste. The mineral swelling agent effect on the characteristics of green lightweight building materials sintered from drinking water purification (DWP) sludge was investigated. Green lightweight building materials were contained up to 50% (wt%) mineral swelling agent and fired at a temperature ranged between 950 °C and 1050 °C. The experimental results indicated that lightweight building materials have successfully sintered between 1000 °C and 1020 °C and added up to 40% (wt%) recycled gypsum board. The sintered building materials have the characteristics of relatively high compressive strength, low bulk density, and thermal conductivity that were in compliance with relevant Taiwan criteria for application in lightweight building materials. To further consider the eco-friendly and environmental safety of lightweight building materials, the recycled gypsum board can act as a good mineral swelling agent, but can also enhance the chemical stabilization and reduce the metals leachability of lightweight materials based on acidic neutralization capacity (ANC) analysis results. To estimate the carbon dioxide emission in manufacturing and transportation of lightweight materials that sintered this experimental conditions, the estimated carbon dioxide reduction rates were approximately 28.6% and 16.7%, respectively, as a result of the energy saving. Experimental results have confirmed that the feasibility of recycled gypsum board used as a swelling agent and good potential for construction works in green lightweight building materials.
Показать больше [+] Меньше [-]Suitability assessment of grey water quality treated with an upflow-downflow siliceous sand/marble waste filtration system for agricultural and industrial purposes
2017
Chaabane, Safa | Riahi, Khalifa | Hamrouni, Hédi | Thayer, Béchir Ben
The present study examines the suitability assessment of an upflow-downflow siliceous sand/marble waste filtration system for treatment and reuse of grey water collected from bathrooms of the student residential complex at the Higher Institute of Engineering Medjez El Bab (Tunisia). Once the optimization of grey water pre-treatment system has been determined, the filtration system was operated at different hydraulic loading rate and media filter proportions in order to assess the suitability of treated grey water for irrigational purpose according to salinity hazard, sodium hazard, magnesium hazard, permeability index, water infiltration rate, and widely used graphical methods. Suitability of the treated grey water for industrial purpose was evaluated in terms of foaming, corrosion, and scaling. Under optimal operational conditions, results reveals that treated grey water samples with an upflow-downflow siliceous sand/marble waste filtration system may be considered as a good and an excellent water quality suitable for irrigation purpose. However, treated grey water was found not appropriate for industrial purpose due to high concentrations of calcium and sodium that can generate foaming and scaling harm to boilers. These results suggest that treated grey water with an upflow-downflow siliceous sand/marble waste filtration system would support production when used as irrigation water.
Показать больше [+] Меньше [-]Microbial-based evaluation of foaming events in full-scale wastewater treatment plants by microscopy survey and quantitative image analysis
2016
Leal, Cristiano | Amaral, António Luís | Costa, Maria de Lourdes
Activated sludge systems are prone to be affected by foaming occurrences causing the sludge to rise in the reactor and affecting the wastewater treatment plant (WWTP) performance. Nonetheless, there is currently a knowledge gap hindering the development of foaming events prediction tools that may be fulfilled by the quantitative monitoring of AS systems biota and sludge characteristics. As such, the present study focuses on the assessment of foaming events in full-scale WWTPs, by quantitative protozoa, metazoa, filamentous bacteria, and sludge characteristics analysis, further used to enlighten the inner relationships between these parameters. In the current study, a conventional activated sludge system (CAS) and an oxidation ditch (OD) were surveyed throughout a period of 2 and 3 months, respectively, regarding their biota and sludge characteristics. The biota community was monitored by microscopic observation, and a new filamentous bacteria index was developed to quantify their occurrence. Sludge characteristics (aggregated and filamentous biomass contents and aggregate size) were determined by quantitative image analysis (QIA). The obtained data was then processed by principal components analysis (PCA), cross-correlation analysis, and decision trees to assess the foaming occurrences, and enlighten the inner relationships. It was found that such events were best assessed by the combined use of the relative abundance of testate amoeba and nocardioform filamentous index, presenting a 92.9 % success rate for overall foaming events, and 87.5 and 100 %, respectively, for persistent and mild events.
Показать больше [+] Меньше [-]