Low sulfur fuel oils (LSFOs) with less than 0.5% sulfur content have been mandated for marine vessels by the International Maritime Organization since 2020. However, owing to the low dispersibility and high viscosity of LSFOs, their oceanic spills are difficult to clean using conventional response systems. In this study, we propose a superhydrophilic and hygroscopic ramie to clean spilled LSFO. To this end, a raw ramie fiber, which is intrinsically hydrophobic, was treated using a mild alkali to remove its waxy, rough, and gummy veneer and reveal a smooth surface. This substantially improved its hygroscopic nature, superhydrophilicity, and water-retention, while preserving its mechanical durability in dry and wet environments. The hygroscopic ramie exhibited underwater superoleophobicity and self-cleaning abilities against highly adhesive LSFOs. Two proofs-of-concept are demonstrated in this study—an oil-proof glove for maximizing oil repellency and a direct oil-scooping device for simple and continuous recovery of spilled oil with high efficiency.

Targeting the removal of Pb²⁺ in wastewater, cellulosic materials were carbonized in an aerobic environment and activated via ion exchange. The maximum adsorption capacity reached 243.5 mg/g on an MCC-derived adsorbent activated with sodium acetate. The modified porous properties improved the adsorption capacity. The capacity could be completely recovered five times through elution with EDTA. Because of the negative effects of Ni, Mg, and Ca elements, the adsorption capacities of activated carbonized natural materials were lower than that of pure cellulose. N₂ adsorption measurement showed that the adsorbent had a large specific surface area as well as abundant micropores and 4-nm-sized mesopores. FTIR and surface potential results proved that carboxyl group was generated in the aerobic carbonization, and was deprotonated during ion exchange. This adsorbent consisted of C–C bonds as the building blocks and hydrophilic groups on the surface. XPS results demonstrated that the Pb 4f binding energies were reduced by 0.7–0.8 eV due to the interaction between Pb²⁺ and the activated adsorbent, indicating that the carboxylate groups bonded with Pb²⁺ through coordination interactions. Pseudo-second-order and Elovich kinetic models were well fitted with the adsorption processes on the pristine and activated carbonized adsorbents, indicative of chemisorption on heterogeneous surfaces. The Freundlich expression agreed well with the data measured, and the pristine and activated adsorbents had weak and strong affinities for Pb²⁺, respectively. The Pb²⁺ adsorption process was exothermic and spontaneous, and heat release determined the spontaneity. The adsorption capacity is attributed to the carboxylate groups and pores generated in the aerobic oxidation and ion exchange procedures.

Plant uptake is an important process in determining the transfer of pesticides through a food chain. Understanding how crops take up and translocate pesticides is critical in developing powerful models to predict pesticide accumulation in agricultural produce and potential human exposure. Herein, wheat was selected as a model plant species to investigate the uptake and distribution of eleven widely used pesticides in a hydroponic system as a function of time for 144 h. The time-dependent uptake kinetics of these pesticides were fitted with a first-order 1-compartment kinetic model. During 144 h, flusilazole and difenoconazole, with relative high log Kₒw (3.87 and 4.36, respectively), displayed higher root uptake rate constants (k). To clarify the role of root lipid content (fₗᵢₚ) in plant accumulation of pesticides, we conducted a lipid normalization meta-analysis using data from this and previous studies, and found that the fₗᵢₚ value was an important factor in predicting the root concentration factor (RCF) of pesticides. An improved correlation was observed between log RCF and log fₗᵢₚKₒw (R² = 0.748, N = 26, P < 0.001), compared with the correlation between log RCF and log Kₒw (R² = 0.686, N = 26, P < 0.001). Furthermore, the hydrophilic pesticides (e.g. log Kₒw < 2) were found to reach partition equilibrium faster than lipophilic pesticides (e.g. log Kₒw > 3) during the uptake process. The quasi-equilibrium factor (αₚₜ) was inversely related to log Kₒw (R² = 0.773, N = 11, P < 0.001) suggesting a hydrophobicity-regulated uptake equilibrium. Findings from this study could facilitate crop-uptake model optimization.

Discharged carbon nanotubes (CNTs) likely interact with co-existing organic contaminants (OCs) and pose joint toxicity to environmental microbes. Herein, hydrophobic pentachlorophenol (PCP) and hydrophilic ciprofloxacin (CIP) were used as representative OCs and their joint toxicities with CNTs to Bacillus subtilis were systematically investigated at cellular, biochemical, and omics levels. The 3-h bacterial growth half inhibitory concentrations of CNTs, PCP, and CIP were 12.5 ± 2.6, 3.5 ± 0.5, and 0.46 ± 0.03 mg/L, respectively, and they all could damage cell membrane, increase intracellular oxidative stress, and alter bacterial metabolomics and transcriptomics; while CNTs-PCP and CNTs-CIP binary exposures exhibited distinct additive and synergistic toxicities, respectively. CNTs increased bacterial bioaccumulation of PCP and CIP via destabilizing and damaging cell membrane. PCP reduced the bioaccumulation of CNTs, while CIP had no significant effect; this difference could be owing to the different effects of the two OCs on cell-surface hydrophobicity and CNTs electronegativity. The additive toxicity outcome upon CNTs-PCP co-exposure could be a result of the balance between the increased toxicity from increased PCP bioaccumulation and the decreased toxicity from decreased CNTs bioaccumulation. The increased bioaccumulation of CIP contributed to the synergistic toxicity upon CNTs-CIP co-exposure, as confirmed by the increased inhibition of topoisomerase Ⅳ activity and interference in gene expressions regulating ABC transporters and lysine biosynthesis. The findings provide novel insights into environmental risks of CNTs.

The surface modifications of nanoparticles (NPs), are well-recognized parameters that affect the toxicity, while there has no study on toxicity of Al₂O₃ NPs with different surface modification. Therefore, for the first time, this study pays attention to evaluating the toxicity and potential mechanism of pristine Al₂O₃ NPs (p-Al₂O₃), hydrophilic (w-Al₂O₃) and lipophilic (o-Al₂O₃) modifications of Al₂O₃ NPs both in vitro and in vivo. Applied concentrations of 10, 20, 40, 80,100 and 200 μg/mL for 24 h exposure on Caenorhabditis elegans (C. elegans), while 100 μg/mL of Al₂O₃ NPs significantly decreased the survival rate. Using multiple toxicological endpoints, we found that o-Al₂O₃ NPs (100 μg/mL) could induce more severe toxicity than p-Al₂O₃ and w-Al₂O₃ NPs. After uptake by C. elegans, o-Al₂O₃ NPs increased the intestinal permeability, easily swallow and further destroy the intestinal membrane cells. Besides, cytotoxicity evaluation revealed that o-Al₂O₃ NPs (100 μg/mL) are more toxic than p-Al₂O₃ and w-Al₂O₃. Once inside the cell, o-Al₂O₃ NPs could attack mitochondria and induce the over-production of reactive oxygen species (ROS), which destroy the intracellular redox balance and lead to apoptosis. Furthermore, the transcriptome sequencing and RT-qPCR data also demonstrated that the toxicity of o-Al₂O₃ NPs is highly related to the damage of cell membrane and the imbalance of intracellular redox. Generally, our study has offered a comprehensive sight to the adverse effects of different surface modifications of Al₂O₃ NPs on environmental organisms and the possible underlying mechanisms.

Production of chrysanthemum (Dendranthema grandiflora) in greenhouses often requires intensive pesticide use, which raises serious concerns over food safety and human health. This study investigated uptake, translocation and residue dissipation of typical fungicides (metalaxyl-M and fludioxonil) and insecticides (cyantraniliprole and thiamethoxam) in greenhouse chrysanthemum when applied in soils. Chrysanthemum plants could absorb these pesticides from soils via roots to various degrees, and bioconcentration factors (BCFLS) were positively correlated with lipophilicity (log Kₒw) of pesticides. Highly lipophilic fludioxonil (log Kₒw = 4.12) had the greatest BCFLS (2.96 ± 0.41 g g⁻¹), whereas hydrophilic thiamethoxam (log Kₒw = −0.13) had the lowest (0.09 ± 0.03 g g⁻¹). Translocation factors (TF) from roots to shoots followed the order of TFₗₑₐf > TFₛₜₑₘ > TFfₗₒwₑᵣ. Metalaxyl-M and cyantraniliprole with medium lipophilicity (log Kₒw of 1.71 and 2.02, respectively) and hydrophilic thiamethoxam showed relatively strong translocation potentials with TF values in the range of 0.29–0.81, 0.36–2.74 and 0.30–1.03, respectively. Dissipation kinetics in chrysanthemum flowers followed the first-order with a half-life of 21.7, 5.5, 10.0 or 8.2 days for metalaxyl-M, fludioxonil, cyantraniliprole and thiamethoxam, respectively. Final residues of these four pesticides, including clothianidin (a primary toxic metabolite of thiamethoxam), in all chrysanthemum flower samples were below the maximum residue limit (MRL) values 21 days after two soil applications each at the recommended dose (i.e., 3.2, 2.1, 4.3 and 4.3 kg ha⁻¹, respectively). However, when doubling the recommended dose, the metabolite clothianidin remained at concentrations greater than the MRL, despite that thiamethoxam concentration was lower than the MRL value. This study provided valuable insights on the uptake and residues of metalaxyl-M, fludioxonil, cyantraniliprole and thiamethoxam (including its metabolite clothianidin) in greenhouse chrysanthemum production, and could help better assess food safety risks of chrysanthemum contamination by parent pesticides and their metabolites.

Supported carbon quantum dots (CQDs), used as fluorescent sensors for the detection of metal ions, have rarely been used to remove heavy metals from water. Nitrogen-doped CQDs immobilized in hydrophilic silica hydrogels exhibited a more superior sensitivity and selectivity for the detection of Re(VII) and Cr(VI) than other metal ions, including Fe(III), Fe(II), Zn(II), Cu(II) and Mn(II). For the first time, low limits of detection (LOD) of 2.3 μM for Re(VII) detection and 65 nM for Cr(VI) detection were reported by a facile method. Based on the high selectivity of fluorescent silica hydrogels for Re(VII) and Cr(VI) detection, the removal of Re(VII) and Cr(VI) by graphene oxide (GO) in water was monitored with the hydrogels used as a turn-off fluorescent sensing platform. The consistent results of the sorption isotherms of each metal on GO, which were obtained from the fluorescence spectra and by UV absorption, further verified the possibility of monitoring metal removal by fluorescence detection. Remarkably, GO removed 1186 mg/g of Re(VII) but only 178 mg/g of Cr(VI). The density functional theory (DFT) calculations indicated that both Re(VII) and Cr(VI) formed stable bonds with silica hydrogels, confirming that the interactions between the metal ions and the substrate would promote the fluorescence quenching of the supported CQDs. On the other hand, Re(VII) interacted more strongly with the carboxyl groups of GO than Cr(VI). In addition, a real-time detection system was designed to alarm the service life of a GO filter used for Re(VII) removal.

Microplastic (MP) pollution has become an area of increasing concern because MPs accumulate various types of pollutants. Many previous studies have explored the interactions between MPs and hydrophobic pollutants. However, little research has been conducted on hydrophilic pollutants, which are of much higher concentration and ubiquitous in environment. Surfactants cause hydrophobic MPs to become hydrophilic, which may significantly enhance their capacities to adsorb hydrophilic pollutants. This study explored the influence of co-existing surfactants on the adsorption of ionic organic pollutants by MPs, and found that the presence of an ionic surfactant could significantly enhance the capacity of polyvinyl chloride (PVC, 0.2 mm) MPs to adsorb pollutants with opposite charges. The Langmuir methylene blue adsorption capacity of PVC could be increased from 172 to 4417 ppm in the presence of a sodium dodecyl benzene sulfonate surfactant. Nonionic surfactants impeded the adsorption of both cationic and anionic pollutants due to the steric resistance of the hydrophilic polyethelene glycol chains. The electrostatic interaction mechanism dominated the interfacial behaviors of ionic pollutants on surfactant-adsorbed MP interfaces. The effects of the surfactants were further verified using four different model pollutants and six surfactants. The adsorption capacities of real environmental MPs, including PVC, polyethylene (PE), polypropylene (PP), and polystyrene (PS), increased by three to twenty-six times. The adsorption properties of MPs may be determined by the presence of co-existing surfactants, rather than their polymer species or additives.

Soluble microbial products (SMPs) discharged into rivers from sewage treatment plants may increase the health risk for downstream drinking water by acting as a precursor of DBPs. Biotransformation or biodegradation could alter the characteristics of SMPs and affect the subsequent formation of DBPs. This study observed the relative contribution of chemical fractions in SMPs and explored the biodegradation of each fraction and their effect on disinfection by-products (DBPs) formation in surface water. The hydrophilic acid (HPIA) and hydrophobic acid (HPOA) constituted the major portion of the SMPs, which were dominated by fulvic acid and humic acids. The transphilic acid (TPIA) and hydrophobic bases (HPOB) were relatively minor but it contained a relative substantial portion of protein-like materials in SMPs. TPIA and HPOB produced insignificant amounts of DBP corresponding to 13% and 14% in the original samples, but they were collectively responsible for 50% of the DBPs yield. Much larger amounts of hydrophobic fractions were utilized than hydrophilic fractions after biodegradation. The increase in SUVA values indicating aromatic structures, except for HPOA fraction, was observed after biodegradation. The protein-like materials in both the HPOA and HPIA fractions and polycarboxylate-type humic acid in the HPIA fraction decreased but the enrichment of HPOA (MW > 100 kDa) and TPIA (MW < 1 kDa) was observed after biodegradation. The production of = C–H in HPIA fraction and the appearance of double peak at 1100 cm⁻¹ in TPIA and HPOB fractions occurred after biodegradation. In overall level, microorganisms effectively utilized DBP precursors from HPIA, HPOA and HPOB fractions but increased the DBPs precursors from the TPIA fraction. TPIA and HPOB fractions had higher DBP yield with chlorine but the DBPs yield of HPIA and HPOA changed little after biodegradation.

Metals are released from biochar (BC) in either the free or dissolved organic carbon (DOC)-combined form. The complexation of metals with DOC influences their toxicity and bioavailability in the environment. The endogenous release of metal species with heterogeneous DOC from BC is very complex; this process has been neglected and remains unaddressed in the literature to date. In this study, the yield and chemical properties of labile DOC from BC were characterized, and the release of endogenous metal/metalloid elements (K, Mg, Mn, Fe, Al, Cu, and Si) and their species from BC with various pyrolysis temperatures and particle sizes were systematically investigated under various solution chemistries. The results showed that pyrolysis temperature of BC significantly influenced the yield and composition of DOC and DOC-metal/metalloid complexes, while particle size had lower impact. The yield of BC-derived DOC significantly decreased and the components gradually changed from low-molecular weight and low-aromaticity hydrophilic humic acid-like substances to complex high-molecular weight and high-aromaticity hydrophobic substances as pyrolysis temperature increased from 200 to 700 °C. The release of total dissolved metals decreased with increasing pyrolysis temperature, while the highest total dissolved Si was released from BC with the moderate pyrolysis temperature (500 °C). The metal elements were mainly released in the DOC-combined form, while the released Si was mainly in the free form in the neutral water environment. The release of DOC increased while that of dissolved metals decreased with increasing solution pH. The release of total dissolved metals/metalloids increased but the ratio of the DOC-combined metals/metalloids decreased with increasing solution ionic strength. These results provide new insight into the understanding of endogenous metal/metalloid release from BC in the natural environment.