Since the introduction of standardized nematode toxicity assays by the American Society for Testing and Materials (ASTM) and International Organization for Standardization (ISO), many studies have reported their use. Given that the currently used standardized nematode toxicity assays have certain limitations, in this study, we examined the use of a novel nematode offspring counting assay for evaluating soil ecotoxicity based on a previous soil-agar isolation method used to recover live adult nematodes. In this new assay, adult Caenorhabditis elegans were exposed to soil using a standardized toxicity assay procedure, and the resulting offspring in test soils attracted by a microbial food source in agar plates were counted. This method differs from previously used assays in terms of its endpoint, namely, the number of nematode offspring. The applicability of the bioassay was demonstrated using metal-spiked soils, which revealed metal concentration-dependent responses, and with 36 field soil samples characterized by different physicochemical properties and containing various metals. Principal component analysis revealed that texture fraction (clay, sand, and silt) and electrical conductivity values were the main factors influencing the nematode offspring counting assay, and these findings warrant further investigation. The nematode offspring counting assay is a rapid and simple process that can provide multi-directional toxicity assessment when used in conjunction with other standard methods.

The potential impacts of naval sonar on cetaceans has led to a series of court cases and statements of concern by international organizations. However, there has been no research conducted on attitudes of the general public with respect to this issue. To investigate this, a preliminary public survey was conducted in Fairfax, Virginia (the Washington, DC Metro region). The majority of the public sampled believed that naval sonar impacted marine mammals (51.3%), that the US Navy should not be exempt from environmental regulations in time of peace (75.2%), and that sonar use should be moderated if it impacts cetaceans (75.8%). Individuals who were conservative, Republican, and have served in the military were more likely to believe the Navy should be exempt from marine mammal protection regulations. In addition, expert interviews were conducted to gain opinions on the potential ramifications of the recent US Supreme Court case on naval sonar mitigation.

PURPOSE OF REVIEW: This article reviews the literature and presents the current status of the use of socio-acoustic surveys in soundscape studies, through the indication of appropriate question formats, types, and topics for each data collection method (soundwalks, interviews, listening tests, and focus group) for the involved public and acoustic stimuli. RECENT FINDINGS: The ISO 12913-2 establishes ways of data collection and reporting requirements for soundscape studies (International Organization for Standartization 2017), including the triangulation technique. This standard recommends some data collection methods, like soundwalks and interviews. Even so, some authors are using different methods to collect data, such as focus group and listening tests. This study investigated through 52 peer-reviewed papers published on the last 20 years the current status of socio-acoustic studies regarding question topics and types, used stimuli, and characteristics about the participants, using the four major adopted data collection methods in soundscape studies: soundwalks, interviews, listening tests, and focus group. Some topics like “soundscape quality” and “sound sources identification and evaluation” are common in the recent studies, as well as the adoption of some question types such as semantic differential scale, the staple scale, and ranking order scale.

The objective of this study is to identify the feasibility of using rhamnolipid biosurfactant to remediate heavy metals contained in manganese nodules collected from the Clarion-Clipperton Fracture Zone, Pacific Ocean. Deep-sea manganese nodules may represent one of the most important future natural resources for heavy metals due to the depletion of resources on land. Since international marine environment guidelines for deep-sea mining will be set up by international organisations in the 2020s, remediation technologies are urgently required for deep-sea mining tailings. We show that rhamnolipid biosurfactant is an environmentally friendly substance and can be successfully used for the remediation of heavy metals in deep-sea mining tailings under various reaction conditions. Rhamnolipids therefore represent a useful extracting agent for heavy metals in deep-sea mining tailings. The removal of nickel (Ni), copper (Cu), and cadmium (Cd) would be enhanced in the presence of rhamnolipids with specific reaction times and concentrations. Future actual remediation technologies should be developed using rhamnolipid biosurfactant on the basis of these results.

Malva sylvestris L. is a widely consumed edible-medicinal plant growing all around the world. The aim of our study was the determination of the concentration levels of heavy metals in M. sylvestris L. samples and their extracts from polluted and non-polluted locations in Niš, Republic of Serbia. The analysis of heavy metals was performed by the AAS (Atomic Absorption Spectroscopy) method from soil, plants, and extracts. The heavy metals content (Fe, Cu, Mn, Ni, Pb, Zn, and Cd) in the soil and plants from the contaminated site is increased, but the coefficients of metal uptake are not significantly different in plants from polluted and non-polluted areas. The highest content of metals was found in aqueous, then water-alcoholic, and the smallest content was determined in alcoholic solutions. The content of the tested metals is within the limits recommended by international organizations, so the plant and its extracts can be safely used.

A bibliometric analysis based on the Science Citation Index Expanded from Web of Science was carried out to provide insights into research activities and trends of the environmental monitoring from 1993 to 2012. Study emphases covered publication outputs, language, categories, journals, countries/territories, institutions, words, and hot issues. The results indicated that the annual output of environmental monitoring publications increased steadily. The environmental sciences and analytical chemistry were the two most common categories. Environmental Monitoring and Assessment published the most articles. The USA and the UK ranked in the top two in terms of all five indicators. The U.S. Environmental Protection Agency took the leading position of the institutions in terms of publication output. The synthesized analysis by words in title, author keywords, and KeyWords Plus provided important clues for hot issues. Researchers paid more attention on water environment monitoring than other environmental factors. The contaminants including organic contaminants, heavy metal, and radiation were most common research focuses, and the organic contaminants and heavy metal of the degree of concern were gradually rising. Sensor and biosensor played an important role in the field of environmental monitoring devices. In addition to conventional device detection method, the remote sensing, GIS, and wireless sensor networks were the mainstream environmental monitoring methods. The international organization, social awareness, and the countries’ positive and effective political and policies promoted the published articles.

The cotton mealybug, Phenacoccus solenopsis Tinsley (Sternorrhyncha: Pseudococcidae) is a serious pest of various cultivated plants in Pakistan. Recent reports show that the parasitoid Aenasius bambawalei Hayat (Hymenoptera: Encyrtidae) is a good biocontrol agent of the pest. Compatibleness is important in any IPM programme, and the insecticide used must have little or no effects on the biological control agent. This study investigated the compatibility of neem treatments and a commercial insecticide, imidacloprid on A. bambawalei. Bioassays were laid out in a completely randomized design (CRD) under laboratory conditions. Results showed that the adult stage of the parasitoid was more susceptible to the commercial insecticide imidacloprid than the concealed pupal stage. Moreover, on the basis of the International Organization for Biological Control (IOBC) toxicity categories of the commercial insecticide, imidacloprid was moderately toxic throughout the study period (Ex >80%) while neem was slightly toxic after 24 h of use (Ex <80%). Results also suggest that A. bambawalei release should be delayed for at least 1 week after neem treatments. Because imidacloprid destroys A. bambawalei, it might cause resurgence of P. solenopsis; thus, farmers should avoid integrating the insecticide in the control of P. solenopsis.

The present study biomonitored the placental polychlorinated biphenyl (PCB) concentrations in women from Punjab Province, Pakistan, that provides the pioneer data for occurrence and body burden of PCBs in placental tissues from South Asian women. The ∑₃₄PCB concentrations in placental tissues were ranged from 20.2 to 115.98 ng/g lipid weight (lip. wt.), with predominance of tetra-PCB (54.67%). The levels of ∑₈DL-PCBs and ∑₆-indicator PCBs were ranged from 2.03 to 27.64 ng/g (lip. wt.) and 1.71 to 30.8 ng/g (lip. wt.), respectively. The WHO-TEQ2005 values for DL-PCBs were ranged from 1.18 × 10⁻⁵ to 0.067 ng/g (lip. wt.), with highest value evaluated for CB-126. The estimated daily intake (EDI) for DL-PCBs was ranged from 9.27 × 10⁻⁸ to 5.25 × 10⁻⁴ pg WHO-TEQ/kg body weight (bw), which was within the tolerable daily intake (TDI) values established by international organizations. The spatial distribution patterns of Σ₃₄PCB concentrations from study area have shown relative higher concentrations in samples from urban and industrial cities than rural areas, and industrial and urban releases along with e-waste handling were recognized as vital PCB sources in the environment. In order to ascertain the transplacental transfer of PCBs, the fetal growth parameters were correlated with the ∑₃₄PCB concentrations in placental tissues. The relationship between ∑₃₄PCB concentrations in placental tissues and infant’s anthropometric measures through multiple linear regression showed a negative correlation of infant’s body weight (R² = 0.0728), crown to heel length (R² = 0.068), head circumference (R² = 0.0342), chest circumference (R² = 0.0001), and mid arm circumference (R² = 0.0096) that noticeably highlights the inhibited fetal anthropometric development associated with maternal PCB bioaccumulation. Hence, an immediate elimination of ongoing PCB addition in the studied area has been emphasized and further investigations are suggested to appropriately manage the public and neonatal health risks in the region.

Background and purpose In Pakistan, almost 70% of the population lives in rural areas. Ninety-four percent of households in rural areas and 58% in urban areas depend on biomass fuels (wood, dung, and agricultural waste). These solid fuels have poor combustion efficiency. Due to incomplete combustion of the biomass fuels, the resulting smoke contains a range of health-deteriorating substances that, at varying concentrations, can pose a serious threat to human health. Indoor air pollution accounts for 28,000 deaths a year and 40 million cases of acute respiratory illness. It places a significant economic burden on Pakistan with an annual cost of 1% of GDP. Despite the mounting evidence of an association between indoor air pollution and ill health, policy makers have paid little attention to it. This review analyzes the existing information on levels of indoor air pollution in Pakistan and suggests suitable intervention methods. Methods This review is focused on studies of indoor air pollution, due to biomass fuels, in Pakistan published in both scientific journals and by the Government and international organizations. In addition, the importance of environmental tobacco smoke as an indoor pollutant is highlighted. Results Unlike many other developing countries, there are no long-term studies on the levels of indoor air pollution. The limited studies that have been undertaken indicate that indoor air pollution should be a public health concern. High levels of particulate matter and carbon monoxide have been reported, and generally, women and children are subject to the maximum exposure. There have been a few interventions, with improved stoves, in some areas since 1990. However, the effectiveness of these interventions has not been fully evaluated. Conclusion Indoor air pollution has a significant impact on the health of the population in Pakistan. The use of biomass fuel as an energy source is the biggest contributor to poor indoor air quality followed by smoking. In order to arrest the increasing levels of indoor pollution, there is a dire need to recognize it as a major health hazard and formulate a national policy to combat it. An integrated effort, with involvement of all stakeholders, could yield promising results. A countrywide public awareness campaign, on the association of indoor air pollution with ill health, followed by practical intervention would be an appropriate approach. Due to the current socioeconomic conditions in the country, development and adoption of improved cooking stoves for the population at large would be the most suitable choice. However, the potential of biogas as a fuel should be explored further, and modern fuels (natural gas and LPG) need to be accessible and economical. Smoking in closed public spaces should be banned, and knowledge of the effect of smoking on indoor air quality needs to be quantified.

Carbon emissions in air passenger transport have become increasing serious with the rapidly development of aviation industry. Combined with a tripartite equilibrium strategy, this paper proposes a multi-level multi-objective model for an air passenger transport carbon tax setting problem (CTSP) among an international organization, an airline and passengers with the fuzzy uncertainty. The proposed model is simplified to an equivalent crisp model by a weighted sum procedure and a Karush-Kuhn-Tucker (KKT) transformation method. To solve the equivalent crisp model, a fuzzy logic controlled genetic algorithm with entropy-Bolitzmann selection (FLC-GA with EBS) is designed as an integrated solution method. Then, a numerical example is provided to demonstrate the practicality and efficiency of the optimization method. Results show that the cap tax mechanism is an important part of air passenger trans’port carbon emission mitigation and thus, it should be effectively applied to air passenger transport. These results also indicate that the proposed method can provide efficient ways of mitigating carbon emissions for air passenger transport, and therefore assist decision makers in formulating relevant strategies under multiple scenarios.