Microplastics are plastics that measure less than 5 mm in diameter. They enter the marine environment as primary sources directly from industrial uses, as well as secondary sources resulting from the degradation of large plastic debris. To improve the knowledge of microplastic pollution in China, we investigated samples from 53 estuarine sediment locations collected with a box corer within the Changjiang Estuary. Microplastics (<5 mm) were extracted from sediments by density separation, after which they were observed under a microscope and categorized according to shape, color and size. Identification was carried out using Micro-Fourier-Transform Infrared Spectroscopy (μ-FT-IR).The abundance of microplastics in the Changjiang Estuary was mapped. The mean concentration was 121 ± 9 items per kg of dry weight, varying from 20 to 340 items per kg of dry weight. It was found that the concentration of microplastics was the highest on the southeast coast of Shanghai. The distribution pattern of microplastics may be affected by the Changjiang diluted water in summer. All of the microplastics collected were categorized according to shape, color and size. Among which fiber (93%), transparent (42%) and small microplastics (<1 mm) (58%) were the most abundant types. No clear correlation between microplastics and the finer sediment fraction was found. Rayon, polyester, and acrylic were the most abundant types of microplastics identified, indicating that the main source of microplastics in the Changjiang Estuary was from washing clothes (the primary source). It is possible to compare microplastic abundance in this study with the results of other related studies using the same quantification method. The identification of microplastics raises the awareness of microplastic pollution from drainage systems. The prevalence of microplastic pollution calls for monitoring microplastics at a national scale on a regular basis.

Increasing anthropogenic activities in the Arctic represent an enhanced threat for oil pollution in a marine environment that is already at risk from climate warming. In particular, this applies to species with free-living pelagic larvae that aggregate in surface waters and under the sea ice where hydrocarbons are likely to remain for extended periods of time due to low temperatures. We exposed the positively buoyant eggs of polar cod (Boreogadus saida), an arctic keystone species, to realistic concentrations of a crude oil water-soluble fraction (WSF), mimicking exposure of eggs aggregating under the ice to oil WSF leaking from brine channels following encapsulation in ice. Total hydrocarbon and polycyclic aromatic hydrocarbon levels were in the ng/L range, with most exposure concentrations below the limits of detection throughout the experiment for all treatments. The proportion of viable, free-swimming larvae decreased significantly with dose and showed increases in the incidence and severity of spine curvature, yolk sac alterations and a reduction in spine length. These effects are expected to compromise the motility, feeding capacity, and predator avoidance during critical early life stages for this important species. Our results imply that the viability and fitness of polar cod early life stages is significantly reduced when exposed to extremely low and environmentally realistic levels of aqueous hydrocarbons, which may have important implications for arctic food web dynamics and ecosystem functioning.

Surface and building runoff can significantly contribute to the total metal loading in urban runoff waters, with potential adverse effects on the receiving ecosystems. The present paper analyses the corrosion-induced metal dissolution (Fe, Mn, Cr, Ni, Cu) from weathering steel (Cor-Ten A) with or without artificial patinas, exposed for 3 years in unsheltered conditions at a marine urban site (Rimini, Italy). The influence of environmental parameters, atmospheric pollutants and surface finish on the release of dissolved metals in rain was evaluated, also by means of multivariate analysis (two-way and three-way Principal Component Analysis). In addition, surface and cross-section investigations were performed so as to monitor the patina evolution. The contribution provided by weathering steel runoff to the dissolved Fe, Mn and Ni loading at local level is not negligible and pre-patination treatments seem to worsen the performance of weathering steel in term of metal release. Metal dissolution is strongly affected by extreme events and shows seasonal variations, with different influence of seasonal parameters on the behaviour of bare or artificially patinated steel, suggesting that climate changes could significantly influence metal release from this alloy. Therefore, it is essential to perform a long-term monitoring of the performance, the durability and the environmental impact of weathering steel.

Results from coastal water pollution monitoring (Lesvos Island, Greece) are presented. In total, 53 samples were analyzed for 58 polar organic micropollutants such as selected herbicides, biocides, corrosion inhibitors, stimulants, artificial sweeteners, and pharmaceuticals. Main focus is the application of a proposed wastewater indicator quartet (acesulfame, caffeine, valsartan, and valsartan acid) to detect point sources and contamination hot-spots with untreated and treated wastewater. The derived conclusions are compared with the state of knowledge regarding local land use and infrastructure. The artificial sweetener acesulfame and the stimulant caffeine were used as indicators for treated and untreated wastewater, respectively. In case of a contamination with untreated wastewater the concentration ratio of the antihypertensive valsartan and its transformation product valsartan acid was used to further refine the estimation of the residence time of the contamination. The median/maximum concentrations of acesulfame and caffeine were 5.3/178 ng L⁻¹ and 6.1/522 ng L⁻¹, respectively. Their detection frequency was 100%. Highest concentrations were detected within the urban area of the capital of the island (Mytilene). The indicator quartet in the gulfs of Gera and Kalloni (two semi-enclosed embayments on the island) demonstrated different concentration patterns. A comparatively higher proportion of untreated wastewater was detected in the gulf of Gera, which is in agreement with data on the wastewater infrastructure. The indicator quality of the micropollutants to detect wastewater was compared with electrical conductivity (EC) data. Due to their anthropogenic nature and low detection limits, the micropollutants are superior to EC regarding both sensitivity and selectivity. The concentrations of atrazine, diuron, and isoproturon did not exceed the annual average of their environmental quality standards (EQS) defined by the European Commission. At two sampling locations irgarol 1051 exceeded its annual average EQS value but not the maximum allowable concentration of 16 ng L⁻¹.

The ubiquitous presence and persistency of microplastics (MPs) in aquatic environments are of particular concern since they represent an increasing threat to marine organisms and ecosystems. Great differences of concentrations and/or quantities in field samples have been observed depending on geographical location around the world. The main types reported have been polyethylene, polypropylene, and polystyrene. The presence of MPs in marine wildlife has been shown in many studies focusing on ingestion and accumulation in different tissues, whereas studies of the biological effects of MPs in the field are scarce. If the nature and abundance/concentrations of MPs have not been systematically determined in field samples, this is due to the fact that the identification of MPs from environmental samples requires mastery and execution of several steps and techniques. For this reason and due to differences in sampling techniques and sample preparation, it remains difficult to compare the published studies.Most laboratory experiments have been performed with MP concentrations of a higher order of magnitude than those found in the field. Consequently, the ingestion and associated effects observed in exposed organisms have corresponded to great contaminant stress, which does not mimic the natural environment. Medium contaminations are produced with only one type of polymer of a precise sizes and homogenous shape whereas the MPs present in the field are known to be a mix of many types, sizes and shapes of plastic. Moreover, MPs originating in marine environments can be colonized by organisms and constitute the sorption support for many organic compounds present in environment that are not easily reproducible in laboratory. Determination of the mechanical and chemical effects of MPs on organisms is still a challenging area of research. Among the potential chemical effects it is necessary to differentiate those related to polymer properties from those due to the sorption/desorption of organic compounds.

Bismuth is a heavy metal whose biogeochemical behaviour in the marine environment is poorly defined. In this study, we exposed three different species of macroalga (the chlorophyte, Ulva lactuca, the phaeophyte, Fucus vesiculosus, and the rhodophyte, Chondrus crispus) to different concentrations of Bi (up to 50 μg L⁻¹) under controlled, laboratory conditions. After a period of 48-h, the phytotoxicity of Bi was measured in terms of chlorophyll fluorescence quenching, and adsorption and internalisation of Bi determined by ICP after EDTA extraction and acid digestion, respectively. For all algae, both the internalisation and total accumulation of Bi were proportional to the concentration of aqueous metal. Total accumulation followed the order: F. vesiculosus > C. crispus > U. lactuca; with respective accumulation factors of about 4200, 1700 and 600 L kg⁻¹. Greatest internalisation (about 33% of total accumulated Bi) was exhibited by C. crispus, the only macroalga to display a phytotoxic response in the exposures. A comparison of the present results with those reported in the literature suggests that Bi accumulation by macroalgae is significantly lower than its accumulation by marine plankton (volume concentration factors of 10⁵ to 10⁷), and that the phytotoxicity of Bi is low relative to other heavy metals like Ag and Tl.

For the first time this study reports on the presence of microplastics (1 nm to <5 mm) in the gastrointestinal tracts of small semipelagic fish (Boops boops) in the Balearic Islands (Mediterranean Sea) from March to May 2014. The results show microplastic ingestion in 68% of full stomach samples with an average of 3.75 items per fish. Only filament type microplastics were observed in B. boops full gastrointestinal tracts. The frequency of occurrence of microplastics was high, with values ranging from 42% to 80%, in comparison to the other ingested items. Spatial variability among locations is high, which suggests that this type of contamination is ubiquitously distributed and originates from multiple sources. The results are important and indirectly provide further evidence of the presence of microplastics, which can be ingested by biota, in the marine environment.

The treatment of municipal wastewater in the Arctic is challenging due to a variety of financial, operational, climatic and technical issues. To better understand the efficacy of current wastewater treatment in this region and the hazard posed to receiving waters, we assessed the occurrence of nutrients and contaminants (i.e., pharmaceuticals, antibiotic resistance genes) as they moved through a lagoon-based treatment system in Cambridge Bay, Nunavut, Canada. Wastewater treatment in this community is performed by the use of a lagoon-tundra wetland system that is discharged into the marine environment and is representative of current common practices throughout the region. In 2014, samples were collected before and during lagoon discharge from two locations in the main lagoon, one location downstream from the lagoon effluent and three locations offshore. Grab samples were collected to measure nutrients (e.g., total nitrogen and phosphorus) and the presence of antibiotic resistance gene-bearing microbes, and Polar Organic Chemical Integrative Samplers (POCIS) were deployed to collect passively organic contaminants in all locations. A total of six pharmaceuticals were detected from a screen of twenty-eight analytes during the study: atenolol, carbamazepine, clarithromycin, metoprolol, sulfamethoxazole and trimethoprim. The greatest concentrations of nutrients, antibiotic resistance genes (ARGs), and pharmaceuticals were found in sampling locations within the treatment lagoon. Offshore of the release point, we observed limited to no detection of pharmaceuticals and ARGs, but no change in total nitrogen and phosphorus from pre-release. We conclude that the current concentrations of monitored pharmaceuticals do not pose a significant hazard at this time to aquatic organisms in Cambridge Bay.

Brine shrimp Artemia sp. has been recognised as an important ecotoxicity and nanotoxicity test model organism for salt-rich aquatic environments, but currently there is still no harmonised testing protocol which would ensure the comparable results for hazard identification. In this paper we aimed to design the harmonised protocol for nanomaterial toxicity testing using Artemia franciscana and present a case study to validate the protocol with silver nanoparticles (AgNPs). We (i) revised the existing nanotoxicity test protocols with Artemia sp. (ii) optimised certain methodological steps based on the experiments with AgNPs and potassium dichromate (K2Cr2O7) as a soluble reference chemical and (iii) tested the optimised protocol in an international inter-laboratory exercise conducted within the EU FP7 NanoValid project. The intra- and inter-laboratory reproducibility of the proposed protocol with a soluble reference chemical K2Cr2O7 was good, which confirms the suitability of this assay for conventional chemicals. However, the variability of AgNPs toxicity results was very high showing again that nanomaterials are inherently challenging for toxicity studies, especially those which toxic effect is linked to shed metal ions. Among the identified sources for this variability were: the hatching conditions, the type of test plate incubation and the illumination regime. The latter induced variations assumingly due to the changes in bioavailable silver species concentrations. Up to our knowledge this is the first inter-laboratory comparison of the Artemia sp. toxicity study involving nanomaterials. Although the inter-laboratory exercise revealed poor repeatability of AgNPs toxicity results, this study provides valuable information regarding the importance of harmonisation of all steps in the test procedure. Also, the presented AgNPs toxicity case study may serve as a platform for further validation steps with other types of NMs.

Approximately 9.5billiontonnes of goods is transported over the world oceans annually with dry bulk representing the largest cargo group. This paper aims to analyse whether the transport and associated inputs of dry bulks into the sea create a risk for the marine environment. For this purpose, we analyse the international regulatory background concerning environmental protection (MARPOL), estimate quantities and identify inputs of such cargoes into the oceans (accidental and operational), and use available information for hazard assessment. Annually, more than 2.15milliontonnes of dry bulk cargoes are likely to enter the oceans, of which 100,000tonnes are potentially harmful to the marine environment according to the definition included in draft maritime regulation. The assessment of the threat to the marine environment is hampered by a lack of available information on chemical composition, bioavailability and toxicity. Perspectives for amendments of the unsatisfying pollution prevention regulations are discussed.