Appalachian surface coal mine overburden affects water quality as drainage percolates through spoil disposal fills. This study evaluated leaching potentials of 15 spoils from south-central Appalachia. Most bulk samples were non acid-forming, all were low in total-S, (≤0.34%), and initial saturated paste specific conductance (SC) ranged from 264 to 3560 μS cm−1. Samples were leached unsaturated (40 cycles) and leachates analyzed for pH, SC, and ion composition. Overall, leachates from unweathered spoils were higher in pH and SC than leachates from weathered spoils. Fine-textured spoils generally produced higher SCs than more coarsely textured spoils. Mean SC for all spoils decreased rapidly from an initial peak of 1468 μS cm−1 (±150) to 247 μS cm−1 (±23). Release patterns for most major ions reflected declining SC. Bicarbonate typically increased with successive leaches, replacing sulfate as the dominant anion. Column SC values were comparable to relevant published field data.

This work aims to study the pseudo-total content, geochemical fractions, and species of arsenic (As) in the bulk soil and in the coarse and fine particles of top soil and soil profiles collected from active and abandoned gold mine spoils in Ghana. The human health risk for adults (male and female) and children has been assessed. To achieve our aims, we collected 51 samples, characterized them, determined the total As content, and sequentially extracted the geochemical fractions of As including water-soluble and un-specifically bound As (FI); specific-sorbed/exchangeable As (FII); poorly (FIII)- and well-crystalline (IV) Fe oxide; and residual/sulphide fraction (FV). In selected samples, As species were determined using synchrotron-based X-ray absorption near edge structure (XANES). Pseudo-total As contents varied from 1807 to 8400 mg kg⁻¹, with the extremes occurring at the abandoned mine spoil. Arsenic was almost 10-fold higher in the fine particles (<0.63 μm) than in the coarse particles. Arsenic was mainly associated with FIII and FV, indicating that the distribution of As in these spoils is governed by their contents of amorphous Fe oxides, sulphides and As bearing minerals. The XANES results indicated that scorodite (FeAsSO₄ = 65–76%) and arsenopyrite (FeAsS = 24–35%) are the two major As-containing minerals in the spoils. The potential mobility (PMF = ∑FI-FIV) of As in the fine particles of the top soil was higher (48–61%) than in the coarse particles (25–44%). The mobile fraction (MF) (FI+FII) and PMF of As in the coarse particles of the profiles increased with depth while it decreased in the fine particles. The median hazard index values indicated an elevated human health risk, especially for children. The high contamination degree and potential mobility of As at the studied mine spoils indicate high potential risk for human and environmental health.

Appalachian USA surface coal mines face public and regulatory pressure to reduce total dissolved solids (TDS) in discharge waters, primarily due to effects on sensitive macroinvertebrates. Specific conductance (SC) is an accurate surrogate for TDS and relatively low levels of SC (300–500 μS cm−1) have been proposed as regulatory benchmarks for instream water quality. Discharge levels of TDS from regional coal mines are frequently >1000 μS cm−1. The primary objectives of this study were to (a) determine the effect of rock type and weathering status on SC leaching potentials for a wide range of regional mine spoils; (b) to relate leachate SC from laboratory columns to actual measured discharge SC from field sites; and (c) determine effective rapid lab analyses for SC prediction of overburden materials. We correlated laboratory unsaturated column leaching results for 39 overburden materials with a range of static lab parameters such as total-S, saturated paste SC, and neutralization potential. We also compared column data with available field leaching and valley fill discharge SC data. Leachate SC is strongly related to rock type and pre-disturbance weathering. Fine-textured and non-weathered strata generally produced higher SC and pose greater TDS risk. High-S black shales produced the highest leachate SC. Lab columns generated similar range and overall SC decay response to field observations within 5–10 leaching cycles, while actual reduction in SC in the field occurs over years to decades. Initial peak SC can be reliably predicted (R2 > 0.850; p < 0.001) by simple lab saturated paste or 1:2 spoil:water SC procedures, but predictions of longer-term SC levels are less reliable and deserve further study. Overall TDS release risk can be accurately predicted by a combination of rock type + S content, weathering extent, and simple rapid SC lab measurements.

Sites contaminated with mixtures of metals, metalloids and organics are difficult to remediate as each contaminant type may require a different treatment. Biochar, with high metal sorption capacity, used singly and in combination with iron filings, is investigated in microcosm trials to immobilise metal(loid)s within a contaminated spoil, thereby enabling revegetation and degradation of organic pollutants. A mine spoil, contaminated with heavy metals, arsenic and spiked with phenanthrene was treated with either 1%w/w biochar, 5%w/w iron or their combination, enhancing phenanthrene degradation by 44–65%. Biochar treatment reduced Cu leaching and enabled sunflower growth, but had no significant effect on As mobility. Iron treatment reduced Cu and As leaching but negatively impacted soil structure and released high levels of Fe causing sunflower plant mortality. The combined treatment reduced both Cu and As leaching and enabled sunflower growth suggesting this could be a useful approach for treating co-contaminated sites.

Organic matter amendments are applied to contaminated soil to provide a better habitat for re-vegetation and remediation, and olive mill waste compost (OMWC) has been described as a promising material for this aim. We report here the results of an incubation experiment carried out in flooded conditions to study its influence in As and metal solubility in a trace elements contaminated soil. NPK fertilisation and especially organic amendment application resulted in increased As, Se and Cu concentrations in pore water. Independent of the amendment, dimethylarsenic acid (DMA) was the most abundant As species in solution. The application of OMWC increased pore water dissolved organic-carbon (DOC) concentrations, which may explain the observed mobilisation of As, Cu and Se; phosphate added in NPK could also be in part responsible of the mobilisation caused in As. Therefore, the application of soil amendments in mine soils may be particularly problematic in flooded systems.

Cadmium and zinc tolerance were examined in populations of Silene paradoxa, one from uncontaminated calcareous soil (CVD) and one from a mine tailing (FC) (Cd < 1–15 ppm, Zn 400–1300 ppm, pH 2–6). The mine population exhibited extremely high Zn and Cd tolerance levels, although the degrees of Cd and Zn enrichment relatively low at the population site. Cd and Zn hypertolerance in FC were associated with reduced rates of accumulation of these metals, both in roots and shoots (Cd), or exclusively in shoots (Zn). However, exclusion potentially explained only a minor part of the superior tolerance in FC. Cd hypertolerance in FC was associated with decreased, rather than enhanced phytochelatin accumulation. The remarkably high levels of Cd and Zn hypertolerance in FC might relate to the low soil pH, due to oxidation of sulphide minerals, and the absence of soil organic matter at the FC site. Silene paradoxa from a copper mine exhibits extreme levels of Zn and Cd tolerance.

We studied the effectiveness of remediation on microbial endpoints, namely microbial biomass and activity, microbial and plant species richness, of an As-contaminated mine spoil, amended with compost (C) alone and in combination with beringite (B) or zerovalent iron grit (Z), to increase organic matter content and reduce trace elements mobility, and to allow Holcus lanatus and Pinus pinaster growth. Untreated spoil showed the lowest microbial biomass and activity and hydrolase activities, and H. lanatus as sole plant species, whereas the presented aided phytostabilisation option, especially CBZ treatment, significantly increased microbial biomass and activity and allowed colonisation by several plant species, comparable to those of an uncontaminated sandy soil. Microbial species richness was only increased in spoils amended with C alone. No clear correlation occurred between trace element mobility and microbial parameters and plant species richness. Our results indicate that the choice of indicators of soil remediation practices is a bottleneck. Organo-mineral amendment and revegetation of a gold mine spoil increased microbial activity but did not increase microbial species richness.

River sediment at a disused lead-zinc mine was analysed to provide an understanding of the chemical nature of the source term for contaminated sediment exported from the site. Changes in concentration and geochemical associations of Pb and Zn were measured using aqua regia digestion and the BCR sequential extraction procedure. Sediment in the immediate vicinity of the mine was highly contaminated with Pb (max. c. 11,000 mg kg⁻¹) and Zn (max. c. 30,000 mg kg⁻¹), but these values declined rapidly within 1 km of the mine due to dilution and hydraulic sorting. Lead fractionation changed from being predominantly in the reducible fraction to being in the acetic acid-extractable fraction, whereas Zn was predominantly in the residual fraction. This material is transported as fine sediment in the river system. Metal concentrations and fractionation have defined the source characteristics of Pb and Zn dispersed from a disused mine and transported by fluvial processes.

This paper details the distribution of Cu, Pb and Zn in aquatic systems draining Mount Isa Ag-Cu-Pb-Zn Mine in arid northern Queensland, Australia. Sediment-metal concentrations in the <2 mm grain-size fraction adjacent to and downstream of the mine significantly exceed background concentrations (Cu, 159; Pb, 36; Zn, 86 ppm) as well as Australian government sediment quality low trigger guidelines (Cu, 65; Pb, 50; Zn, 200 ppm). Overbank sediments are more contaminated than channel sediments with mean values of Cu, 480; Pb, 540; Zn, 750 ppm. Mean concentrations in cut riverbank samples from the <2 mm fraction were Cu, 195; Pb, 724; Zn, 807 ppm. Corresponding <180 μm samples returned concentrations of Cu, 321; Pb, 995; Zn, 1110 ppm. Delivery of contaminants during wet seasons from Mount Isa Mine and historically contaminated riverbanks remains an ongoing issue. The ease of dust entrainment in arid zones means that sediments enriched in toxic concentrations of metals may be widely dispersed and ultimately ingested and absorbed by biota.