Soil contamination by heavy metals has increased noticeably within the past years. Unlike organic compounds, metals cannot degrade; therefore effective cleanup is required to reduce its toxicity. This experiment was undertaken to investigate the comparative potential of Panicum maximum and Axonopus compressus to bioremediate zinc polluted soils, the impact of Zn on the antioxidant defense system of the plant, assaying for activities of antioxidants proteins. Zinc salts were mixed with soil at various concentrations 5 mg/kg, 10 mg/kg, 20 mg/kg and 40 mg/kg in triplicates and control was setup. After 4 months, the plants (root, shoot and leaf) and soil were analyzed for morphological, biochemical parameters and Zn concentration. The root length of P. maximum and A. compressus decreased as the concentration of zinc increased. The least shoot length inhibition of A. compressus was 6.16% (5 mg/kg) while the highest shoot length inhibition was 40.14% (40 mg/kg). The least shoot length inhibition of Panicum maximum was 6.16% exposed to 5 mg/kg and the highest shoot length inhibition was 53.13% (40 mg/kg). There was significant reduction of the heavy metals in vegetated soils for P. maximum and A. compressus at the end of the study compared to the heavy metals in the soils at the beginning of the study (p<0.05). P. maximum, is a better removal of Zn than A. compressus, however, it was not significant. Glutathione levels varied significantly (p≤ 0.05) with respect to heavy metals. A. compressus has more effects on Glutathione activities than P. maximum. Zn caused a decrease in metallothionein level in P. maximum while A. compressus metallothionein level increased.

International audience | Five organic matters, three phosphate compounds, zerovalent iron grit (ZVIG, 2% by soil weight), two alkaline compounds, and two commercial formulations were incorporated, singly and some combined with ZVIG, into a highly Cu-contaminated topsoil (Soil P7, 2600 mg Cu kg−1) from a wood treatment facility. Formulations and two composts were also singly incorporated into a slightly Cu-contaminated topsoil (Soil P10, 118 mg Cu kg−1) from the facility surrounding. This aimed to reduce the labile pool of Cu and its accumulation in beans cultivated on potted soils in a climatic chamber. Lowest Cu concentration in soil solution occurred in P7 soils amended with activated carbon (5%) and ZVIG, singly and combined. Basic slag (3.9%) and compost of sewage sludge (5%) combined with ZVIG promoted shoot production and limited foliar Cu accumulation. For amended P10 soils, no changes occurred in soil solution and foliar Cu concentrations, but one compost increased shoot production. Three soil amendments, iron grit with compost, calcium oxide, and basic slags, decreased the phytotoxicity of a Cu-contaminated soil.

International audience | A lysimeter approach (under natural climatologic conditions) was used to evaluate the effect of four metal immobilizing soil treatments [compost (C), compost + cyclonic ashes (C + CA), compost + cyclonic ashes + steel shots (C + CA + SS)) and cyclonic ashes + steel shots (CA + SS)] on metal leaching through an industrially contaminated soil. All treatments decreased Zn and Cd leaching. Strongest reductions occurred after CA + SS and C + CA + SS treatments (Zn: -99.0% and -99.2% respectively; Cd: -97.2% and -98.3% respectively). Copper and Pb leaching increased after C (17 and > 30 times for Cu and Pb respectively) and C + CA treatment (4.4 and > 3.7 times for Cu and Pb respectively). C + CA + SS or CA + SS addition did not increase Cu leaching; the effect on Pb leaching was not completely clear. Our results demonstrate that attention should be paid to Cu and Pb leaching when organic matter additions are considered for phytostabilization of metal contaminated soils

International audience | Accumulation of copper (Cu) in soils due to the application of fungicides may be toxic for organisms and hence affect winegrowing sustainability. Soil parameters such as pH and dissolved organic matter (DOM) are known to affect the availability of Cu. In this study, we investigated the contribution of chromophoric and fluorescent DOM properties to the prediction of Cu availability in 18 organic vineyard soils in the Bordeaux winegrowing area (France). The DOM parameters, assessed through absorbance and fluorescence analyses, and proxies for Cu availability (total soluble Cu and free ionic Cu2+) were measured in 0.01 M KCl extracts. Total soluble Cu (CuKCl) varied 23-fold while free ionic Cu2+ varied by a factor of 4600 among the soils. DOC concentrations were similar among the soils, but the samples differed in the quality of DOM as assessed by optical spectroscopy. Multilinear regression models with and without DOM quality parameters were investigated to predict Cu availability. The best model for CuKCl successfully explained 83% of variance and included pH, CuT, and two DOM fluorescence quality indices, the FI fluorescence index, which distinguishes between microbial and higher plant origins, and the HIX humification index. For the prediction of Cu2+, pH alone explained 88% of variance and adding DOM parameters did not improve modelling. The two Cu availability proxies were related to pH. This study confirms the prominent role of pH in Cu availability and underlines the importance of DOM quality to better predict Cu solubility

Removal of natural organic matter from water was investigated using granulated activated carbon. Groundwater from northern Banat region (Serbia, Yugoslavia) was used. Samples of raw water and water after coagulation were ozonated and than GAC adsorption was performed. The investigation was carried out under the static conditions to determine the GAC adsorption capacity and kinetic coefficients.

Removal of natural organic matter (NOM) from groundwater by aluminium sulphate and polyaluminium chloride (PACl) was investigated. The maximal decrease of UV absorbance at 254 nm was near 70%. Decrease of permanganate value about 50% was achieved by PACl coagulation. Similar effect can be achieved using 2.5 fold higher concentration of aluminium sulphate. Coagulation process at pH 5.5 was successful with 3-5 times less concentration of coagulant. The heterogenous composition of NOM in water had been changing by coagulation. The total trihalomethane formation potential is 50-60% lower in coagulated water. The greatest removal was success for chloroform precursors.

International audience | This study focused on the role of bioaccessibility in the phenanthrene (PHE) biodegradation in diffusely contaminated soil, by combining chemical and microbiological approaches.First, we determined PHE dissipation rates and PHE sorption/desorption isotherms for two soils (PPY and Pv) presenting similar chronic PAH contamination, but different physico-chemical properties.Our results revealed that the PHE dissipation rate was significantly higher in the Pv soil compared to the PPY soil, while PHE sorption/desorption isotherms were similar. Interestingly, increases of PHE desorption and potentially of PHE bioaccessibility were observed for both soils when adding rhamnolipids (biosurfactants produced by Pseudomonas aeruginosa). Second, using C-13-PHE incubated in the same soils, we analyzed the PHE degrading bacterial communities. The combination of stable isotope probing (DNA-SIP) and 16S rRNA gene pyrosequencing revealed that Betaproteobacteria were the main PHE degraders in the Pv soil, while a higher bacterial diversity (Alpha-, Beta-, Gammaproteobacteria and Actinobacteria) was involved in PHE degradation in the PPY soil. The amendment of biosurfactants commonly used in biostimulation methods (i.e. rhamnolipids) to the two soils clearly modified the PHE sorption/desorption isotherms, but had no significant impact on PHE degradation rates and PHE-degraders identity.These results demonstrated that increasing the bioaccessibility of PHE has a low impact on its degradation and on the functional populations involved in this degradation.

In recent years, Feammox has made it possible to remove NH₄⁺-N under anaerobic conditions; however, its application in practical wastewater treatment processes has not been extensively reported. In this study, an up-flow anaerobic biological filter based on limonite (Lim-UAF) was developed to facilitate long-term and stable treatment of domestic sewage. Lim-UAF achieved the highest removal efficiency of chemical oxygen demand (COD) and NH₄⁺-N at a hydraulic retention time (HRT) of 24 h (Stage II). Specifically, the COD and NH₄⁺-N content decreased from 240.8 and 30.0 mg/L to about 7.5 and 0.35 mg/L, respectively. To analyze the potential nitrogen removal mechanism, the Lim-UAF was divided into three layers according to the height of the reactor. The results showed that COD and NH₄⁺-N removal had remarkable characteristics in Lim-UAF. More than 55.0% of influent COD was removed in the lower layer (0–30 cm) of Lim-UAF, while 60.2% of NH₄⁺-N was removed in the middle layer (30–60 cm). Microbial community analysis showed that the community structure in the middle and upper layers (60–90 cm) was relatively similar, but quite different from that of the lower layer. Heterotrophic bacteria were dominant in the lower layer, whereas iron-reducing and iron-oxidizing bacteria were enriched in the upper and middle layers. The formation of secondary minerals (siderite and Fe(OH)₃) indicated that the Fe(III)/Fe(II) redox cycle occurred in Lim-UAF, which was triggered by the Feammox and NDFO processes. In summary, limonite was used to develop a single-stage wastewater treatment process for simultaneously removing organic matter and NH₄⁺-N, which has excellent application prospects in domestic sewage treatment.

It is difficult to achieve simultaneous and efficient removal of heterocyclic drugs (HCDs) and total nitrogen (TN) in conventional denitrification biofilter (DNBF). Inspired by the effective degradation of refractory organic matter by cobalt-based advanced oxidation process and the need for in-situ upgrading of DNBF, peracetic acid (PAA)/cobalt-loaded ceramsite-based DNBF system was constructed for the first time to treat biochemical tailwater containing HCDs. Results showed that PAA/Co-DNBF had relatively high removal rates for the four HCDs with the order of CBZ > TMP > SDZ > SMX, and the optimal DNBF was H2 with 150 μg L⁻¹of PAA. Overall, TN and HCDs removal increased by 178%–455% and 2.50%–40.99% respectively. When the influent concentration of NO₃⁻-N, COD and each HCDs of 20 mg/L, 60 mg/L and 20 μg/L, below 15 mg/L of effluent TN and the highest average removal rate of SMX (67.77%) could be achieved, under HRT of 4 h in H2. More even distribution of microbial species and low acute toxicity of effluent were also achieved. More even distribution of microbial species and low acute toxicity of effluent were also achieved. In addition, high extracellular polymeric substance (EPS) content and Gordonia after the addition of PAA contributed to the degradation of HCDs. This study supplied a potentially effective strategy for the treatment of biochemical tailwater containing HCDs and provided new insight into the advance of denitrification technology.

In this study, the role of organic matter structure and microporosity in the adsorption and degradation of radioactive nonylphenol in sediments treated with potassium ferrate solutions was investigated. The demineralized fractions and acid non-hydrolyzable fractions were isolated and characterized via advanced solid-state ¹³C nuclear magnetic resonance and CO₂ gas adsorption technology, respectively. Radioactive nonylphenol in the sediments was also fractionated into ¹⁴CO₂, water-soluble residues, extractable residues, and strongly bound residues after treatment with potassium ferrate. A first-order, two-compartment kinetic model well described the mineralization and degradation kinetics of radioactive nonylphenol in the sediment (R² > 0.99). The degradation percentages of spiked nonylphenol were highly negatively correlated with aromatic carbon, aliphatic carbon, and microporosity estimated from acid-non-hydrolyzable fractions in the bulk sediments (R² > 0.82, p < 0.01). The percentages of adsorbed parent nonylphenol residues were highly positively correlated with aromatic carbon, aliphatic carbon, and microporosity estimated from acid-non-hydrolyzable fractions in the bulk sediments (R² > 0.90, p < 0.01). The parent nonylphenol compound desorbed into the aqueous phase and was completely degraded. This study is the first to demonstrate the important role of aromatic carbon, aliphatic carbon, and microporosity in acid non-hydrolyzable fractions on the degradation of nonylphenol during the potassium ferrate oxidation treatment process.