This study was performed to evaluate the ability of white-rot fungi to decolorize dye effluents. A total of 222 isolates of white-rot fungi were initially investigated to assess their ability to decolorize chemically different synthetic dyes in solid medium, resulting in selection of 25 isolates including four isolates of Berkandera adusta, five isolates of Ceriporia lacerata, three isolates of Irpex lacteus, one isolate of Perenniporia fraxinea, ten isolates of Phanerochaete spp., one isolate of Phlebia radiata, and one isolate of Porostereum spadiceum. Of the 25 isolates, B. adusta KUC9065, C. lacerata KUC8090, P. calotricha KUC8003, and P. spadiceum KUC8602 were finally selected on the basis of their ability to decolorize synthetic dyes in liquid medium, and were used to decolorize industrial effluents. B. adusta KUC9065 increased the transmittance of visible light by 71–92 %. Decolorization of wastewater by B. adusta KUC9065 was probably caused by the lignin-modifying enzymes produced by the fungus. In addition, the acute toxicity to Daphnia magna decreased from 2.5 to 2.1 and from 3.5 to 2.6 toxic units over 24 and 48 h, respectively.

Background, aim and scope Pulp and paper mills generate a plethora of pollutants depending upon the type of pulping process. Efforts to mitigate the environmental impact of such effluents have been made by developing more effective biological treatment systems in terms of biochemical oxygen demand, chemical oxygen demand, colour and lignin content. This study is the first that reports an evaluation of the effects of a tertiary treatment by fungi (Pleurotus sajor caju, Trametes versicolor and Phanerochaete chrysosporium and Rhizopus oryzae) on individual organic compounds of a Eucalyptus globulus bleached kraft pulp and paper mill final effluent after secondary treatment (final effluent). Material and methods The tertiary treatment with P. sajor caju, T. versicolor and P. chrysosporium and R. oryzae was performed in batch reactors, which were inoculated with separate fungi species and monitored throughout the incubation period. Samples from effluent after secondary and after tertiary treatment with fungi were analysed for both absorbance and organic compounds. The samples were extracted for organic compounds using solid-phase extraction (SPE) and analysed by gas chromatography-mass spectrometry (GC/MS). The efficiencies of the SPE procedure was evaluated by recovery tests. Results A total of 38 compounds (carboxylic acids, fatty alcohols, phenolic compounds and sterols) were identified and quantified in the E. globulus bleached kraft pulp mill final effluent after secondary treatment. Recoveries from the extraction procedure were between 98.2% and 99.9%. The four fungi species showed an adequate capacity to remove organic compounds and colour. Tertiary treatment with R. oryzae was able to remove 99% of organic compounds and to reduce absorbance on 47% (270 nm) and 74% (465 nm). P. sajor caju, T. versicolor and P. chrysosporium were able to remove 97%, 92% and 99% of organic compounds, respectively, and reduce 18% (270 nm) to 77% (465 nm), 39% (270 nm) to 58% (465 nm) and 31% (270 nm) to 10% (465 nm) of absorbance, respectively. Discussion The wide variety of organic compounds found in the final effluent must be due to the degradation of E. globulus wood in pulp and paper mill. The concentrations of organic compounds in the final effluent of E. globulus bleached kraft pulp mill were in residual levels maybe due to the secondary treatment. The recovery tests showed the effectiveness of the extraction procedure, and no losses of analyte were suspected in the analytical determinations. Lignin derivatives such as vanilic acid, syringic acid, guaiacol, syringol and phloroglucinol were totally removed by R. oryzae, but the 47% absorbance reduction obtained at 270 nm suggests that these species were not able to complete degradation of lignin macromolecular compounds. Conclusions The organic compounds (carboxylic acids, fatty alcohols, phenolic compounds and sterols) were removed more efficiently by tertiary treatment with R. oryzae or P. chrysosporium, followed by P. sajor caju and T. versicolor. Regarding the removal of both colour and organic compounds, the tertiary treatment with R. oryzae was the most efficient. Recommendations and perspectives In order to reduce the deleterious impacts of paper mill effluents, efforts have been made to develop more effective advanced tertiary treatments. This study may serve as a basis of characterisation, in terms of organic compounds of E. globulus bleached kraft pulp mill final effluent after secondary treatment and as an effort to understand the effects of tertiary treatments with fungi on low concentrations of organic compounds from biological secondary treatment.

This study aimed to determine the mycoremediative capacity of filamentous fungi consortia in landfill heavy metal contaminated soil. Streak plate method was utilized for the isolation of fungi from the landfill soil. Isolates were identified using morphological and molecular techniques. Heavy metal tolerance of the fungi was determined using radial growth diameter technique. Twelve species of landfill indigenous fungi were used for the bioremediation process. Two categories of fungi consortia namely highly tolerant fungi (Perenniporia subtephropora, Daldinia starbaeckii, Phanerochaete concrescens, Cerrena aurantiopora, Fusarium equiseti, Polyporales sp., Aspergillus niger, Aspergillus fumigatus, and Trametes versicolor) and moderately tolerant fungi (Paecilomyces lilacinus, Antrodia serialis, and Penicillium cataractum) were used to amend the contaminated soil; meanwhile, the unamended soil served as control. Maximum tolerance index of 1.0 was reported in Cr-, Cu-, and Fe-amended PDA medium. Meanwhile, the maximum heavy metal bioremoval efficiencies were for highly tolerant fungal consortium treated soil and were recorded as As (62%) > Mn (59%) > Cu (49%) > Cr (42%) > Fe (38%). Likewise, the maximum metal removal rate constant (K) and the half-lives (t₁/₂) were 0.0097/day 71 days, 0.0088/day 79 days, 0.0067/day 103 days, 0.0054/day 128 days, and 0.0048/day 144 days for As, Mn, Cu, Cr, and Fe, respectively, which were all for soil treated with consortium of highly tolerant fungi (P. subtephropora, D. starbaeckii, P. concrescens, C. aurantiopora, F. equiseti, Polyporales sp., A. niger, A. fumigatus, and T. versicolor). Spectra analysis revealed a clear distinction in the functional groups between the fungal treated and the untreated soils. Peaks at 874 ± 2 cm⁻¹ and 1425 ± 2 cm⁻¹ were only found in fungi amended soil. Physicochemical parameters mainly pH and redox potential played a key role in the bioremediation process, and bioaccumulation was believed to be the favored mechanism for the metal bioremoval. The data are suitable for assessing the contribution of bioaugmentation with consortia of fungi. It is equally important for assessing the synergistic effect of fungi on the reduction of extractable heavy metals in contaminated soil.