Recent studies have indicated that urban streets can be hotspots for emissions of methane (CH4) from leaky natural gas lines, particularly in cities with older natural gas distribution systems. The objective of the current study was to determine whether leaking sewer pipes could also be a source of street-level CH4 as well as nitrous oxide (N2O) in Cincinnati, Ohio, a city with a relatively new gas pipeline network. To do this, we measured the carbon (δ13C) and hydrogen (δ2H) stable isotopic composition of CH4 to distinguish between biogenic CH4 from sewer gas and thermogenic CH4 from leaking natural gas pipelines and measured CH4 and N2O flux rates and concentrations at sites from a previous study of street-level CH4 enhancements (77 out of 104 sites) as well as additional sites found through surveying sewer grates and utility manholes (27 out of 104 sites). The average isotopic signatures for δ13C-CH4 and δ2H-CH4 were −48.5‰ ± 6.0‰ and −302‰ ± 142‰. The measured flux rates ranged from 0.0 to 282.5 mg CH4 day−1 and 0.0–14.1 mg N2O day−1 (n = 43). The average CH4 and N2O concentrations measured in our study were 4.0 ± 7.6 ppm and 392 ± 158 ppb, respectively (n = 104). 72% of sites where fluxes were measured were a source of biogenic CH4. Overall, 47% of the sampled sites had biogenic CH4, while only 13% of our sites had solely thermogenic CH4. The other sites were either a source of both biogenic and thermogenic CH4 (13%), and a relatively large portion of sites had an unresolved source (29%). Overall, this survey of emissions across a large urban area indicates that production and emission of biogenic CH4 and N2O is considerable, although CH4 fluxes are lower than those reported for cities with leaky natural gas distribution systems.

High-density polyethylene (HDPE) is a known sorbent for non-ionic organic compounds in technical applications. Nevertheless, there is little information available describing sorption to industrial HDPE for a broad range of compounds. With a better understanding of the sorption properties of synthetic polymers, environmental risk assessment would achieve a higher degree of accuracy, especially for microplastic interactions with organic substances. Therefore, a robust methodology for the determination of sorbent properties for non-ionic organic compounds by HDPE is relevant for the understanding of molecular interactions for both technical use and environmental risk assessment.In this work, sorption properties of HDPE material used for water pipes were characterized using a poly-parameter linear free-energy relationship (ppLFER) approach. Sorption batch experiments with selected probe sorbates were carried out in a three-phase system (air/HDPE/water) covering an aqueous concentration range of at least three orders of magnitude. Sorption in the concentration range below 10⁻² of the aqueous solubility was found to be non-linear and the Freundlich model was used to account for this non-linearity. Multiple regression analysis (MRA) using the determined distribution coefficients and literature-tabulated sorbate descriptors was performed to obtain the ppLFER phase descriptors for HDPE. Sorption properties of HDPE were then derived from the ppLFER model and statistical analysis of its robustness was conducted. The derived ppLFER model described sorption more accurately than commonly used single-parameter predictions, based i.e., on log Kₒ/w. The ppLFER predicted distribution data with an error 0.5 log units smaller than the spLFERs. The ppLFER was used for a priori prediction of sorption by the characterized sorbent material. The prediction was then compared to experimental data from literature and this work and demonstrated the strength of the ppLFER, based on the training set over several orders of magnitude.

The Great Eastern Japan Earthquake on March 11, 2011, damaged reactor cooling systems at Fukushima Dai-ichi nuclear power plant. The subsequent venting operation and hydrogen explosion resulted in a large radioactive nuclide emission from reactor containers into the environment. Here, we collected environmental samples such as soil, plant species, and water on April 10, 2011, in front of the power plant main gate as well as 35 km away in Iitate village, and observed gamma-rays with a Ge(Li) semiconductor detector. We observed activation products (²³⁹Np and ⁵⁹Fe) and fission products (¹³¹I, ¹³⁴Cs (¹³³Cs), ¹³⁷Cs, ¹¹⁰ᵐAg (¹⁰⁹Ag), ¹³²Te, ¹³²I, ¹⁴⁰Ba, ¹⁴⁰La, ⁹¹Sr, ⁹¹Y, ⁹⁵Zr, and ⁹⁵Nb). ²³⁹Np is the parent nuclide of ²³⁹Pu; ⁵⁹Fe are presumably activation products of ⁵⁸Fe obtained by corrosion of cooling pipes. The results show that these activation and fission products, diffused within a month of the accident.

This study presents the chemical composition of VOCs in air and gas discharges collected at Nisyros Island (Dodecanese Archipelago, Greece). The main goals are i) to discriminate between natural and anthropogenic VOC sources and ii) to evaluate their impact on local air quality. Up to 63 different VOCs were recognized and quantitatively determined in 6 fumaroles and 19 air samples collected in the Lakki caldera, where fumarolic emissions are located, and the outer ring of the island, including the Mandraki village and the main harbor. Air samples from the crater area show significant concentrations of alkanes, alkenes, cyclic, aromatics, and S- and O-bearing heterocycles directly deriving from the hydrothermal system, as well as secondary O-bearing compounds from oxidation of primary VOCs. At Mandraki village, C6H6/Σ(methylated aromatics) and Σ(linear)/Σ(branched) alkanes ratios <1 allow to distinguish an anthropogenic source related to emissions from outlet pipes of touristic and private boats and buses.

Marine pollution by plastics and microplastics (plastic particles 1 nm to 5 mm) is a recognized environmental issue. There are a few studies measuring the concentration of microplastics in the wastewater treatment plants (WWTP) effluent to the sea. Although microplastic concentrations are low in the WWTP effluent, the actual amount of microplastic ending up in the marine environment through WWTPs is quite significant. The present study is an extensive questionnaire-based survey to untrained managers of 101 WWTPs located all over Greece reporting visually-observed plastic items. 94 of the WWTPs have screens with gaps larger than 5 mm. This suggests that microplastics are passing through pretreatment to the main WWTP. In addition, 89 of the WWTP managers observed plastics in different tanks of the WWTPs. Cotton swab sticks are identified as the most common plastic found in WWTPs and the surrounding marine and coastal areas of the effluent pipes.

This study provides a first estimate of the sources, distribution, and risk presented by emerging organic contaminants (EOCs) in coastal waters off southwestern Taiwan. Ten illicit drugs, seven nonsteroidal anti-inflammatory drugs (NSAIDs), five antibiotics, two blood lipid regulators, two antiepileptic drugs, two UV filters, caffeine, atenolol, and omeprazole were analyzed by solid-phase extraction and liquid chromatography coupled to tandem mass spectrometry (SPE–LC–MS/MS). Thirteen EOCs were detected in coastal waters, including four NSAIDs (acetaminophen, ibuprofen, ketoprofen, and codeine), three antibiotics (ampicillin, erythromycin, and cefalexin), three illicit drugs (ketamine, pseudoephedrine, and MDMA), caffeine, carbamazepine, and gemfibrozil. The median concentrations for the 13 EOCs ranged from 1.47ng/L to 156ng/L. Spatial variation in concentration of the 13 EOCs suggests discharge into coastal waters via ocean outfall pipes and rivers. Codeine and ampicillin have significant pollution risk quotients (RQ>1), indicating potentially high risk to aquatic organisms in coastal waters.

Natural organic matter (NOM) interaction with corrosion sediments is important because it can adversely affect the behaviour of many organic and inorganic pollutants in drinking water distribution systems. NOM accumulation onto corrosion sediments can cause serious problems for water supply, such as bacteria regrowth and deterioration of water quality. Corrosion sediments have different structures from the well-known iron oxides. The interaction among corrosion sediments and water organic matter can also differ. The main goal of this work was to understand the adsorption mechanism of the processes of NOM interaction with corrosion sediments. Fulvic acid (FA) isotherms on corrosion sediments in logarithmic coordinates of the Freundlich equation have different segments with different slopes, representing the non-adsorbed and adsorbed conditional component of the FA. The formation of structures with a molecular weight higher than the initial FA was observed. FA adsorption on corrosion sediments depends on time. Almost 60–70 % of the FA was removed during the first 10 min of contact. Such rapid adsorption indicates that FA was accumulated onto corrosion sediments mainly due to physical-chemical interaction. The pseudo-second-order kinetics model was demonstrated to better describe the adsorption of FA onto corrosion sediments than the pseudo-first-order model. External mass transfer is the limiting stage of the process of FA adsorption onto corrosion sediments. This knowledge is useful for understanding of corrosion processes and biological regrowth in water supply pipes and thus further decrease of drinking water quality.

Hydrophobic organic compounds are common in the environment, especially in water bodies like rivers and lakes. Generally, due to their physico-chemical characteristics, mainly to hydrophobicity, these compounds are adsorbed by suspended material or other compartments which provide compatibility. Thus, compounds such as polycyclic aromatic hydrocarbons (PAHs) are rapidly adsorbed onto suspended material or even naturally occurring biofilms in water bodies. Biofilms can be defined as complex structures with cells and aggregates of cells. The extracellular polymers present empty spaces that can be filled by water. The biofilm is a sessile microbial community with several kinds of organisms such as bacteria, protozoa, fungi, algae, and extracellular polymeric substances, which may be found on almost any surface exposed to water. Here, biofilms were used to monitor the presence of PAHs in the Barigui River in Curitiba, Brazil. For the measurements and collection of representative microcoenoses, a biofilm sampling device was designed consisting of six glass plates installed in an open polyvinyl chloride pipe of 30 cm diameter and 60 cm length. The sampling device was exposed in the Barigui River for 2 weeks campaigns. The formed biofilm was treated and chemical analysis was performed for PAHs determination. The results showed that biofilms can trap most of the PAHs, especially those with high K ₒw values (octanol–water partition coefficient). Four campaigns were conducted. The total PAHs concentration ranged from 11,204.34 ± 560.12 to 45,846.90 ± 2,290.45 ng/g. According to the isomers ratio, the main source of PAHs in the first and second campaign was of pyrolytic origin, in other words, the PAHs were by-products from burning of light-refined oil products (gasoline and diesel oil). Meanwhile, the other campaigns revealed that the main source is of petrogenic origin. However, the possibility of both sources is not discarded considering the scenario studied and the records of sediments samples. Most of the investigations carried out focused on the loading of river sediments and suspended solids, but the biofilms might detect the amount that could be taken up by benthic organisms, for instance.

The primary purpose of water aeration is to increase the oxygen saturation of the water. This can be achieved by using hydraulic structures because of substantial air bubble entrainment at these structures. This paper reviewed the literature on hydraulic structures used in water aeration processes. The hydraulic structures were divided into two groups as the high-head flow systems and the free-surface flow systems. The high-head flow systems were circular and venturi nozzles, pipe with venturi tube, and high-head conduit, and the free-surface flow systems were weir, stepped cascade, and free-surface conduit. Air/water flow ratio and aeration efficiency in circular nozzles with air holes and venturi nozzles were significantly high. Pipes with venturi tubes showed high aeration efficiency although they had low air/water flow ratio. In high-head and free-surface conduits, almost full oxygen transfer, up to the saturation value, occurred. Forty-five degrees triangular sharp-crested weir had significantly better air/water flow ratio and aeration efficiency than other sharp-crested weir shapes. Stepped cascades, in particular nappe flow regime, were very efficient means of aeration.

The cost effective maintenance of underwater pressure pipes for sewage disposal in Austria requires the detection and localization of leakages. Extrusion of wastewater in lakes can heavily influence the water and bathing quality of surrounding waters. The Distributed Temperature Sensing (DTS) technology is a widely used technique for oil and gas pipeline leakage detection. While in pipeline leakage detection, fiber optic cables are installed permanently at the outside or within the protective sheathing of the pipe; this paper aims at testing the feasibility of detecting leakages with temporary introduced fiber optic cable inside the pipe. The detection and localization were tested in a laboratory experiment. The intrusion of water from leakages into the pipe, producing a local temperature drop, served as indicator for leakages. Measurements were taken under varying measurement conditions, including the number of leakages as well as the positioning of the fiber optic cable. Experiments showed that leakages could be detected accurately with the proposed methodology, when measuring resolution, temperature gradient and measurement time were properly selected. Despite the successful application of DTS for leakage detection in this lab environment, challenges in real system applications may arise from temperature gradients within the pipe system over longer distances and the placement of the cable into the real pipe system.