Recent research has highlighted the potential of honeybees and bee products as biological samplers for monitoring xenobiotic pollutants. However, the effectiveness of these biological samplers in tracking microplastics (MPs) has not yet been explored. This study evaluates several methods of sampling MPs, using honeybees, pollen, and a novel in-hive passive sampler named the APITrap. The collected samples were characterized using a stereomicroscopy to count and categorise MPs by morphology, colour, and type. To chemical identification, a micro-Fourier transform-infrared (FTIR) spectroscopy was employed to determine the polymer types. The study was conducted across four consecutive surveillance programmes, in five different apiaries in Denmark. Our findings indicated that APITrap demonstrated better reproducibility, with a lower variation in results of 39%, compared to 111% for honeybee samples and 97% for pollen samples. Furthermore, the use of APITrap has no negative impact on bees and can be easily applied in successive samplings. The average number of MPs detected in the four monitoring studies ranged from 39 to 67 in the APITrap, 6 to 9 in honeybee samples, and 6 to 11 in pollen samples. Fibres were the most frequently found, accounting for an average of 91% of the total MPs detected in the APITrap, and similar values for fragments (5%) and films (4%). The MPs were predominantly coloured black, blue, green and red. Spectroscopy analysis confirmed the presence of up to five different synthetic polymers. Polyethylene terephthalate (PET) was the most common in case of fibres and similarly to polypropylene (PP), polyethylene (PE), polyacrylonitrile (PAN) and polyamide (PA) in non fibrous MPs. This study, based on citizen science and supported by beekeepers, highlights the potential of MPs to accumulate in beehives. It also shows that the APITrap provides a highly reliable and comprehensive approach for sampling in large-scale monitoring studies.

Chlorinated paraffins (CPs) are industrial chemicals produced in large quantities. Short-chain CPs (SCCPs) were classified as persistent organic pollutants under the Stockholm Convention in 2017. Medium-chain CPs (MCCPs) became candidate persistent organic pollutants in 2021. CPs are now ubiquitously found in the environment. Honey bees can be exposed to CPs during foraging, and this exposure subsequently results in the contamination of honey and other bee products along with colony food production and storage. Here, SCCP and MCCP concentrations in honey collected from Chinese apiaries in 2015 and 2021 were determined. Total CP concentrations in honey from 2021 to 2015 were comparable, but the ratio of MCCPs/SCCPs was higher in 2021 than in 2015. SCCP and MCCP congener group profiles in all honey samples were similar and dominated by C₁₀–₁₁Cl₆–₇ and C₁₄Cl₆–₇, respectively. MCCP concentrations were also higher than SCCP concentrations in bees, pollen, and wax but not in bee bread, which were all collected in 2021. The order of average CP concentrations was determined as wax > bee > pollen > bee bread > honey. Poor relationships were found between SCCP concentrations in honey and other samples, but a relationship between MCCP concentrations in honey and other samples was observed. Migration tests of CPs in plastic bottles showed essentially no migration into honey during storage. The risks to humans from CPs in honey are low.

The Covid-19 outbreak had a critical impact on a massive amount of human activities as well as the global health system. On the other hand, the lockdown and related suspension of working activities reduced pollution emissions. The use of biomonitoring is an efficient and quite recent tool to assess environmental pollution through the analysis of a proper bioindicator, such as bees. This study set out to ascertain the impact of the Covid-19 pandemic lockdown on the environmental occurrence of eleven heavy metals in the Campania region (Italy) by analyzing bees and bee products. A further aim of this study was the assessment of the Honeybee Contamination Index (HCI) in three different areas of the Campania region and its comparison with other Italian areas to depict the current environmental pollutants levels of heavy metals. The results showed that the levels of heavy metals bioaccumulated by bees during the pandemic lockdown (T1) were statistically lower than the sampling times after Covid-19 restrictions and the resumption of some or all activities (T2 and T3). A comparable trend was observed in wax and pollen. However, bee, pollen, and wax showed higher levels of Cd and Hg in T1 than T2 and T3. The analysis of the HCI showed a low contamination level of the sampling sites for Cd and Pb, and an intermediate-high level as regards Ni and Cr. The biomonitoring study highlighted a decrease of heavy metals in the environmental compartments due to the intense pandemic restrictions. Therefore, Apis mellifera and other bee products remain a reliable and alternative tool for environmental pollution assessment.

The limited evidence available suggests that the interaction between chemical pollutants and biological particles may intensify respiratory diseases caused by air pollution in urban areas. Unlike air pollutants, which are routinely measured, records of biotic component are scarce. While pollen concentrations are daily surveyed in most cities, data related to airborne bacteria or fungi are not usually available. This work presents the first effort to understand atmospheric pollution integrating both biotic and abiotic agents, trying to identify relationships among the Proteobacteria, Actinobacteria and Ascomycota phyla with palynological, meteorological and air quality variables using all biological historical records available in the Madrid Greater Region. The tools employed involve statistical hypothesis contrast tests such as Kruskal-Wallis and machine learning algorithms. A cluster analysis was performed to analyse which abiotic variables were able to separate the biotic variables into groups. Significant relationships were found for temperature and relative humidity. In addition, the relative abundance of the biological phyla studied was affected by PM₁₀ and O₃ ambient concentration. Preliminary Generalized Additive Models (GAMs) to predict the biotic relative abundances based on these atmospheric variables were developed. The results (r = 0.70) were acceptable taking into account the scarcity of the available data. These models can be used as an indication of the biotic composition when no measurements are available. They are also a good starting point to continue working in the development of more accurate models and to investigate causal relationships.

Pollen allergens, widely present in the atmosphere, are the main cause of seasonal respiratory diseases that affect millions of people worldwide. Although previous studies have reported that nitrogen dioxide (NO₂) and ozone (O₃) promote pollen allergy, the specific biological processes and underlying mechanisms remain less understood. In this study, Platanus pollen grains were exposed to gaseous pollutants (NO₂ and O₃). We employed environmental electron microscopy, flow cytometry, western blot assay, enzyme-linked immunoassay, ultraviolet absorption spectrometry, circular dichroism, and protein mass spectrometry to characterise the subpollen particles (SPPs) released from pollen grains. Furthermore, we determined the immunogenicity and pathogenicity induced by Platanus pollen allergen a 3 (Pla a 3). Our results demonstrated that NO₂ and O₃ could damage the pollen cell membranes in SPPs and increase the amount of Pla a 3 allergen released into the atmosphere. Additionally, NO₂ and O₃ altered the structure of Pla a3 protein through nitrification and oxidation, which not only enhanced the immunogenicity of allergens but also increased the stability of the protein. In vivo analysis using an animal model indicated that NO₂ and O₃ greatly aggravated pollen-induced pneumonia. Thus, our study provides guidance for the prevention of pollen allergic diseases.

The frequent exposure of bees to a wide variety of fungicides, on crops where they forage, can be considered a stressor factor for these pollinators. The organisms are exposed both to the fungicide active ingredients and to the adjuvants of commercial formulations. All these ingredients are brought to the hive by bee foragers through contaminated pollen and nectar, thus exposing also immature individuals during larval phase. This work aimed to compare the effects of larval exposure to the fungicide pyraclostrobin (active ingredient and commercial formulation) and its influence on the cytotoxicity to midguts in adults, which were inoculated with the Nosema ceranae spores in the post-emergence stage. Under laboratory conditions, Apis mellifera larvae received an artificial diet containing fungicide solution from the third to the sixth day of the feeding phase. One-day-old adult workers ingested 100,000 infectious N. ceranae spores mixed in sucrose solution. Effects on midgut were evaluated through cellular biomarkers of stress and cell death. The exposure to the fungicide (active ingredient and commercial formulation) did not affect the larval post-embryonic development and survival of adult bees. However, this exposure induced cytotoxicity in the cells of the midgut, showed by the increase in DNA fragmentation and alteration in the HSP70 immunolabeling pattern. Without the pathogen, the midgut cytotoxic effects and HSP70 immunolabeling of the organisms exposed to the commercial formulation were lower when compared to the exposure to its active ingredient. However, in the presence of the pathogen, the cytotoxic effects of the commercial formulation to the adult bees’ midgut were potentialized. The pathogen N. ceranae increased the damage to the intestinal epithelium of adult bees. Thus, realistic doses of pyraclostrobin present in beebread consumed by larvae can affect the health and induce physiological implications to the midgut functions of the adult bees.

Pesticide exposure is regarded as a contributing factor to the high gross loss rates of managed colonies of Apis mellifera. Pesticides enter the hive through contaminated nectar and pollen carried by returning forager honey bees or placed in the hive by beekeepers when managing hive pests. We used an in vitro rearing method to characterize the effects of seven pesticides on developing brood subjected dietary exposure at worse-case environmental concentrations detected in wax and pollen. The pesticides tested included acaricides (amitraz, coumaphos, fluvalinate), insecticides (chlorpyrifos, imidacloprid), one fungicide (chlorothalonil), and one herbicide (glyphosate). The larvae were exposed chronically for six days of mimicking exposure during the entire larval feeding period, which is the worst possible scenario of larval exposure. Survival, duration of immature development, the weight of newly emerged adult, morphologies of the antenna and the hypopharyngeal gland, and gene expression were recorded. Survival of bees exposed to amitraz, coumaphos, fluvalinate, chlorpyrifos, and chlorothalonil was the most sensitive endpoint despite observed changes in many developmental and physiological parameters across the seven pesticides. Our findings suggest that pesticide exposure during larvae development may affect the survival and health of immature honey bees, thus contributing to overall colony stress or loss. Additionally, pesticide exposure altered gene expression of detoxification enzymes. However, the tested exposure scenario is unlikely to be representative of real-world conditions but emphasizes the importance of proper hive management to minimize pesticide contamination of the hive environment or simulates a future scenario of increased contamination.

In recent years, the impact of Plant Protection Products (PPPs) on insect pollinator decline has stimulated significant amounts of research, as well as political and public interest. PPP residues have been found in various bee-related matrices, resulting in governmental bodies worldwide releasing guidance documents on methods for the assessment of the overall risk of PPPs to different bee species. An essential part of these risk assessments are PPP residues found in pollen and nectar, as they represent a key route of exposure. However, PPP residue values in these matrices exhibit large variations and are not available for many PPPs and crop species combinations, which results in inaccurate estimations and uncertainties in risk evaluation. Additionally, residue studies on pollen and nectar are expensive and practically challenging. An extrapolation between different cropping scenarios and PPPs is not yet justified, as the behaviour of PPPs in pollen and nectar is poorly understood. Therefore, this review aims to contribute to a better knowledge and understanding of the fate of PPP residues in pollen and nectar and to outline knowledge gaps and future research needs. The literature suggests that four primary factors, the crop type, the application method, the physicochemical properties of a compound and the environmental conditions have the greatest influence on PPP residues in pollen and nectar. However, these factors consist of many sub-factors and initial effects may be disguised by different sampling methodologies, impeding their exact characterisation. Moreover, knowledge about these factors is ambiguous and restricted to a few compounds and plant species. We propose that future research should concentrate on identifying relationships and common features amongst various PPP applications and crops, as well as an overall quantification of the described parameters; in order to enable a reliable estimation of PPP residues in pollen, nectar and other bee matrices.

Ozone (O₃) and nitrogen dioxide (NO₂) are thought to play primary roles in aggravating air pollution-induced health problems. However, the effects of joint O₃/NO₂ on the allergenicity of pollen allergens are unclear. Humulus japonicus pollen allergen 1 (Hum j1) is a profilin protein that causes widespread pollinosis in eastern Asia. In order to study the effects of combined O₃/NO₂ on the allergenicity of Hum j1, tandem six-histidine peptide tag (His6)-fused recombinant Hum j1 (rHum j1) was expressed in a prokaryotic system and purified through His6 affinity chromatography. The purified rHum j1 was used to immunize SD rats. Rat sera with high titers of IgG and IgE antibodies against rHum j1 were used for allergenicity quantification. The rHum j1 was exposed to O₃/NO₂, and changes in allergenicity of the exposed rHum j1 were assayed using the immunized rat antibodies. Tandem LC-MS/LC (liquid chromatography-mass spectrometer/liquid chromatography spectrometer) chromatography and UV and circular dichroism (CD) spectroscopy were used to study the structural changes in rHum j1. Our data demonstrated that a novel disulfide bond between the sulfhydryl groups of two neighboring cysteine molecules was formed after the rHum j1 exposure to joint O₃/NO₂, and therefore IgE-binding affinity was increased and the allergenicity was reinforced. Our results provided clues to elucidate the mechanism behind air pollution-induced increase in pollinosis prevalence.

In order to study the distribution of pesticide residues in beekeeping matrices, samples of live in-hive worker honey bees (Apis mellifera), fresh stored pollen and beeswax were collected during 2016–2017 from 45 apiaries located in different landscape contexts in Spain. A total of 133 samples were screened for 63 pesticides or their degradation products to estimate the pesticide exposure to honey bee health through the calculation of the hazard quotient (HQ). The influence of the surrounding environment on the content of pesticides in pollen was assessed by comparing the concentrations of pesticide residues found in apiaries from intensive farming landscapes to those found in apiaries located in mountainous, grassland and urban contexts. Beeswax revealed high levels of miticides used in beekeeping such as coumaphos, chlorfenvinphos, fluvalinate and acrinathrin, which were detected in more than 75% of samples. Pollen was predominantly contaminated by miticides but also by insecticides used in agriculture such as chlorpyrifos and acetamiprid, which showed concentrations significantly higher in apiaries located in intensive farming contexts. Pesticides residues were less frequent and at lower concentrations in live honey bees. Beeswax showed the highest average hazard scores (HQ > 5000) to honey bees. Pollen samples contained the largest number of pesticide residues and relevant hazard (HQ > 50) to bees. Acrinathrin was the most important contributor to the hazard quotient scores in wax and pollen samples. The contributions of the pesticides dimethoate and chlorpyrifos to HQ were considered relevant in samples.