Chemical conditioning is an effective strategy for improved river sediment dewatering affecting both the dewatering efficiency and subsequent resource utilization of the dewatered cake. Two types of conditioning agents, polyaluminium chloride (PAC)/cationic polyacrylamide (PAM) (coagulation precipitation conditioning agent, referred to as P–P conditioning) and ferrous activated sodium persulfate (advanced oxidation conditioning agent, referred to as F–S conditioning) were examined. With increasing leach liquid to solid (L/S) ratio the concentration of Cd for the real time leachates from the dewatered cakes decreased, but the leaching ratio of Cd in both P–P and F–S dewatered cakes increased. With the same L/S, the leaching ratio was reduced for both types of conditioning, as compared to no conditioning, with the leaching ratio being least with F–S conditioning. The leaching ratio of Cd in the dewatered cake with L/S of 100 L kg⁻¹ was reduced from 21.3% of the total Cd present for the un-conditioned sediment to 12.5% upon P–P conditioning and 11.6% upon F–S conditioning. Furthermore, the different conditioning methods affected the Cd speciation in the dewatered cakes reducing the easy-to-leach speciation of exchangeable and carbonate-bound Cd species and increasing the potential-to-leach speciation of iron-manganese oxide and organically bound Cd species and also the difficult-to-leach species. Risk assessment indicates that the risk due to Cd leaching from the dewatered cakes at L/S of 100 L kg⁻¹ was reduced from high risk to medium risk after P–P and F–S conditioning with reduced bioavailability.

Produced water is a type of wastewater generated from hydraulic fracturing, which may pose a risk to the environment and humans due to its high ionic strength and the presence of elevated concentrations of metals/metalloids that exceed maximum contamination levels. The mobilization of As(V) and Se(VI) in produced water and selected soils from Qingshankou Formation in the Songliao Basin in China were investigated using column experiments and synthetic produced water whose quality was representative of waters arising at different times after well creation. Temporal effects of produced water on metal/metalloid transport and sorption/desorption were investigated by using HYDRUS-1D transport modelling. Rapid breakthrough and long tailings of As(V) and Se(VI) transport were observed in Day 1 and Day 14 solutions, but were reduced in Day 90 solution probably due to the elevated ionic strength. The influence of produced water on the hydrogeological conditions (i.e., change between equilibrium and non-equilibrium transport) was evidenced by the change of tracer breakthrough curves before and after the leaching of produced water. This possibly resulted from the sorption of polyacrylamide (PAM (-CH2CHCONH2-)n) onto soil surfaces, through its use as a friction reducer in fracturing solutions. The sorption was found to be reversible in this study. Minimal amounts of sorbed As(V) were desorbed whereas the majority of sorbed Se(VI) was readily leached out, to an extent which varied with the composition of the produced water. These results showed that the mobilization of As(V) and Se(VI) in soil largely depended on the solution pH and ionic strength. Understanding the differences in metal/metalloid transport in produced water is important for proper risk management.

Polyacrylamide (PAM) use in irrigation for erosion control has increased water infiltration and reduced soil erosion. This has improved runoff water quality via lower concentrations of nitrogen, phosphorous, and pesticides, and decreased biological oxygen demand. Since non-toxic high molecular weight anionic PAMs removed clay size sediment particles in flowing water, it was hypothesized that PAM would effectively remove or immobilize microorganisms in flowing water. In an agricultural field at the USDA Agricultural Research Service, Idaho, USA, the efficacy of PAM-treatment of furrow irrigation water to remove several categories of microorganisms in the inflow and runoff was determined. Treatments were: (1) PAM application and a control; (2) three flow rates; (3) two distances from the inflow point; and (4) three times during each irrigation. After water travelled 1 m at 7.5 and 15.5/min, PAM-treatment reduced total bacterial and microbial biomass and total fungal biomass relative to the control treatment. After water travelled 40 m at 7.5, 15.5, and 22.5/min, PAM-treatment reduced algae, the numbers active and total bacteria, active and total fungal length, and total bacterial biomass, total fungal and microbial biomass relative to the control treatment. Although specific organisms were not identified or monitored in this study, the results clearly have implications for controlling the spread of soil-borne plant pathogens and other classes of harmful organisms within and among fields via irrigation water and in re-utilized return flows. Beyond furrow-irrigated agriculture, new methods to manage overland transmission of harmful microorganisms could potentially help control transport of pathogens from animal waste in runoff and groundwater.

Biochar has been proven as a soil amendment to improve soil environment. However, mechanistic understanding of biochar on soil physical properties and microbial community remains unclear. In this study, a wood biochar (WB), was incorporated into a highly weathered tropical soil, and after 1 year the in situ changes in soil properties and microbial community were evaluated. A field trial was conducted for application of compost, wood biochar, and polyacrylamide. Microstructure and morphological features of the soils were characterized through 3D X-ray microscopy and polarized microscopy. Soil microbial communities were identified through next-generation sequencing (NGS). After incubation, the number of pores and connection throats between the pores of biochar treated soil increased by 3.8 and 7.2 times, respectively, compared to the control. According to NGS results, most sequences belonged to Anaerolinea thermolimosa, Caldithrix palaeochoryensis, Chthoniobacter flavus, and Cohnella soli. Canonical correlation analysis (CCA) further demonstrated that the microbial community structure was determined by inorganic N (IN), available P (AP), pH, soil organic C (SOC), porosity, bulk density (BD), and aggregate stability. The treatments with co-application of biochar and compost facilitated the dominance of Cal. palaeochoryensis, Cht. flavus, and Coh. soli, all of which promoted organic matter decomposition and ammonia oxidation in the soil. The apparent increases in IN, AP, porosity, and SOC caused by the addition of biochar and compost may be the proponents of changes in soil microbial communities. The co-application of compost and biochar may be a suitable strategy for real world biochar incorporation in highly weathered soil.

The versatile use of various synthetic polymers, including plastics, generates a large volume of non-degradable waste, which is eventually responsible for forming microplastics (MPs) in aquatic environments. The present study describes the significant spatial and seasonal variation on the abundance of MPs and their physiochemical nature along the Mandovi-Zuari estuarine system of Goa, west coast of India. During the wet season (September), the average abundance of MPs was found relatively higher in water (0.107 particles/m³) and sediment (7314 particles/kg) than those found in the dry season (April) (0.099 particles/m³ in water and 4873 particles/kg in sediment). During the wet season, heavy rain and excessive riverine freshwater influx carry more terrestrial plastic debris in the estuarine system which causes higher averages MPs density in surface water and sediment. <300 μm sized particles and black colored MPs were predominant equally in water and sediment during both seasons. MPs of different shapes like fragments, fibres, films and beads accounted for most collected samples. The Micro-Fourier Transform Infrared Spectroscopy (μ-FTIR) based compositional analysis identified approximately 33 types of polymers, of which polyacrylamide (PAM), polyacetylene, polyamide (PA), polyvinyl pyrrolidone (PVP), polyvinyl chloride (PVC), and polyimide (PI) were abundant. Fragmentation of larger plastic particles due to mismanaged treated and untreated STPs and washing machine effluents are the primary sources of these MPs in the estuarine system. Moreover, these estuaries also receive a variety of domestic, industrial and other wastes from local cities, ports, and fishing jetties. Thus the present study enlightens the current distribution of MPs and their sources in the Mandovi-Zuari estuarine system and thus provides very useful information to the stakeholder and concerned departments for initiating the mitigation measures.

Polymer flooding is one of the most important enhanced oil recovery techniques. However, a large amount of hydrolyzed polyacrylamide (HPAM)-containing wastewater is produced in the process of polymer flooding, and this poses a potential threat to the environment. In this study, the treatment of HPAM-containing wastewater was analyzed in an ozonic-anaerobic-aerobic multistage treatment process involving an ozone reactor (OR), an upflow anaerobic sludge blanket reactor (UASBR), and an aerobic biofilm reactor (ABR). At an HPAM concentration of 500 mg L⁻¹ and an ozone dose of 25 g O₃/g TOC, the HPAM removal rate reached 85.06%. With fracturing of the carbon chain, high-molecular-weight HPAM was degraded into low-molecular-weight compounds. Microbial communities in bioreactors were investigated via high-throughput sequencing, which revealed that norank_c_Bacteroidetes_vadinHA17, norank_f_Cytophagaceae, and Meiothermus were the dominant bacterial groups, and that Methanobacterium, norank_c_WCHA1-57, and Methanosaeta were the key archaeal genera. To the best of our knowledge, this is the first study in which HPAM-containing wastewater is treated using an ozonic-anaerobic-aerobic multistage treatment system. The ideal degradation performance and the presence of keystone microorganisms confirmed that the multistage treatment process is feasible for treatment of HPAM-containing wastewater.

Litter is a well-known problem for marine species; however, we still know little about the extent to which they're affected by microplastics. In this study, we analyse the presence of this type of debris in Western Mediterranean striped dolphins' intestinal contents over three decades. Results indicated that frequency was high, as 90.5% of dolphins contained microplastics. Of these microplastics, 73.6% were fibres, 23.87% were fragments and 2.53% were primary pellets. In spite of the high frequency of occurrence, microplastic amount per dolphin was relatively low and highly variable (mean ± SD = 14.9 ± 22.3; 95% CI: 9.58–23.4). Through FT-IR spectrometry, we found that polyacrylamide, typically found in synthetic clothes, was the most common plastic polymer. Here, we establish a starting point for further research on how microplastics affect this species' health and discuss the use of striped dolphins as indicators of microplastics at sea.

The diffusive gradient in thin film technique was recently adapted to organic compounds. The diffusional coefficient (D) is a key parameter needed to calculate the time-weighted average concentration. In this study, two methods are used for D measurement in two gels (agarose and polyacrylamide): the diffusion cell method (Dcₑₗₗ) and the slice stacking method (Dₛₜₐcₖ). Thus, D were discussed and compared for 112 organic compounds, including pesticides, hormones, and pharmaceuticals. Dₛₜₐcₖ tends to be higher than Dcₑₗₗ. It could be explained by the presence of a non-negligible diffusive boundary layer thickness in diffusion cell. Consequently, the use of sampling rates (RS) should be more adequate to determine water concentration, for a given bulk flow velocity. Dₛₜₐcₖ also corresponds to the diffusion in gel only, allowing the determination of the maximal RS, and would be considered as a reference value that can be adjusted to in situ conditions, by applying the appropriate DBL thickness. The range and variability of D values found in the literature and obtained in this work were discussed. Relationships between D and compound physicochemical properties (molecular mass, log Dow, polar surface area, van der Waals volume) were investigated. We did not find clear and robust correlation between D and any single physicochemical property, for the set of compounds tested.

Due to substrate layers with different substrate configurations, extensive green roofs (EGRs) exhibit different rainfall runoff retention and pollution interception effects. In the rainfall runoff scouring process, nutrient leaching often occurs in the substrate layer, which becomes a pollution source for rainwater runoff. In this study, six EGR devices with different substrate layer configurations were fabricated. Then, the cumulative leaching quantity (CLQ) and total leaching rate (TLR) of NH₄⁺, TN, and TP in the outflow of nine different depth simulated rainfall events under local rainfall characteristics were evaluated and recorded. Furthermore, the impact of different substrate configurations on the pollution interception effects of EGRs for rainfall runoff was studied. Results show that a mixed adsorption substrate in the EGR substrate layer has a more significant rainfall runoff pollution interception capacity than a single adsorption substrate. PVL and PVGL, as EGRs with layered configuration substrate layers, exhibited good NH₄⁺-N interception capacity. The CLQ and TLR of NH₄⁺-N for PVL and PVGL were − 114.613 mg and − 63.43%, − 121.364 mg, and − 67.16%, respectively. Further, the addition of biochar as a modifier significantly slowed down the substrate layer TP leaching effect and improved the interception effect of NH₄⁺-N and TN. Moreover, although polyacrylamide addition in the substrate layer aggravated the nitrogen leaching phenomenon in the EGRs’ outflow, but the granular structure substrate layer constructed by it exhibited a significantly inhibited TP leaching effect.

Water treatment residuals produced after addition of polyaluminium chloride and anionic polyacrylamide (PAC-APAM WTRs) were evaluated for the potential to remove Cd²⁺ and Zn²⁺ from aqueous solutions by batch adsorption studies. The maximum adsorption capacity obtained from Langmuir modeling was 85.5 mg Cd²⁺/g PAC-APAM WTRs or 25.6 mg Zn²⁺/g PAC-APAM WTRs. A Dubinin-Radushkevich (D-R) model study showed that the adsorption process was chemically controlled. The pseudo-second-order model described the adsorption kinetic data better than the pseudo-first-order model, while kinetic studies showed that the adsorption process included external surface adsorption and intraparticle diffusion, which was likely the rate-limiting step. PAC-APAM WTRs adsorbed Cd²⁺ and Zn²⁺ in the pH range of 3–9 and in the temperature of 20–40 °C, and the immobilization ability for both ions increased with the increase of pH or an increase in temperature. FT-IR spectroscopy analysis illustrated that the carboxyl groups from APAM in WTRs participated in the adsorption reactions in addition to Fe(Al)-O functional groups and O–H groups. This short-term study showed that PAC-APAM WTRs could be a cost-effective media for the remediation of Cd²⁺ and Zn²⁺ contaminated soils. Further studies are needed to examine the slow adsorption mechanisms and determine the optimum mass ratio of soil to PAC-APAM WTRs under various soil conditions.