The present research studies the performance of Converter Sludge (CL)as a nano-activator of persulfate (PS) in Permeable Reactive Barrier (PRB) as an in-situ technology for leachate treatment.In batch experiments, the acidic conditions (pH = 3) have been the most suitable for removal operations, where COD and NH3 removal efficiencies are 69.15% and 60.96%, respectively. The Box–Behnken design (BBD) has been employed to optimize three parameters, namely PS/ COD ratio, CS dose, and pore volume (PV), using COD and NH3 of leachate landfill as the target pollutant. The BBD is considered a satisfactory model to optimize the process. Under optimal conditions (PS/COD ratio: 3.47, CS dose: 3.09 g L-1,and PV: 4.27), the measured values of the COD and NH3 removal efficiencies have been 74.2 and 66.8, respectively, all within the 95%-prediction intervals, which indicate the model’s success in predicting removal values. The biodegradability (BOD5/COD) of the real leachate has been enhanced from 0.25 to 0.77, with the toxicity of real leachate getting decreased by more than 90%.

The present research investigates the ability of graphene oxide nanosheets for treatment of dairy wastewater, using In Situ Sludge Magnetic Impregnation” (ISSMI) to separate sludge after adsorption process. To increase the interaction between magnetic nanoparticles and graphene oxide, the former has been functionalized, using 3-Aminopropyl triethoxysilane, with the synthesized graphene oxide and magnetic nanoparticles being characterized by FT-IR, SEM, and NCHS analysis. The experiments have been conducted on the effluent of Pegah factory. The batch adsorption experiments have been carried out to investigate the effect of adsorbent dose, contact time, and pH on the removal of total nitrogen, total phosphorus, COD, and turbidity. At adsorbent dose of 320 mg L-1, the removal efficiencies of 90, 80, 84, and 94% have been observed for TN, TP, COD, and turbidity, respectively. The adsorbent data has been modeled by Langmuir and Freundlich isotherms, giving results that are compatible with Freundlich isotherm. TN, TP, and COD are mostly particulate materials in dairy wastewaters; therefore, when nanosheets aggregate, particulate materials are trapped between GO nanosheets; as a result, pollutants are distributed heterogeneously on the adsorbent's surface. Consequently, adsorption does not occur as monolayer on the surface of GO; for this reason, adsorption follows Freundlich model. Maximum absorption capacity of the adsorbent turns out to be 730 mg g-1 for total nitrogen, 600 mg g-1 for total phosphorus, 26000 mg g-1 for COD, and 5500 mg g-1 for turbidity. Adsorption kinetic has been studied with the first and second order equation, giving results that are compatible with second order equation.

Duckweeds are of special interest, as they are naturally growing weeds that have the capacity to tolerate and remove toxic pollutants, including heavy metals from the environment. Studies have revealed that duckweed (Lemna minor) can tolerate and remove heavy metals from aqueous solutions. In the present study, the efficiency of L. minor in the removal of Ni and Cr individually from aqueous solutions was investigated at concentrations of 3.05, 3.98 and 4.9 mg/L for Ni and 1.91, 2.98, and 4.2 mg/L for Cr. Experiments were run for 22 days, after which the metal content in the plant was estimated by atomic absorption spectrophotometer (AAS). The duckweed showed higher percentage of Ni removal than Cr. Specific Growth Rate (SGR) was found to be reduced at high concentrations of both Ni and Cr. Statistical analysis suggested that the growth of the plant was affected by the toxic effect of both Ni and Cr. Bioaccumulation of Ni was higher than Cr in L. minor. The mechanism of removal of both Ni and Cr followed second order kinetics. It is suggested that these duckweeds can remove Ni and Cr from aqueous solution and can also accumulate the same in considerable concentrations, at low initial metal concentrations.