Indium tin oxide (ITO) is an important semiconductor material, because of increasing commercial products consumption and potentially exposed workers worldwide. So, urgently we need to assess and manage potential health risks of ITO. Although the Occupational Exposure Limit (OEL) has been established for ITO exposure, there is still a lack of distinguishing the risks of exposure to particles of different sizes. Therefore, obtaining toxicological data of small-sized particles will help to improve its risk assessment data. Important questions raised in quantitative risk assessments for ITO particles are whether biodistribution of ITO particles is affected by particle size and to what extent systematic adverse responses is subsequently initiated. In order to determine whether this toxicological paradigm for size is relevant in ITO toxic effect, we performed comparative studies on the toxicokinetics and sub-acute toxicity test of ITO in mice. The results indicate both sized-ITO resided in the lung tissue and slowly excreted from the mice, and the smaller size of ITO being cleared more slowly. Only a little ITO was transferred to other organs, especially with higher blood flow. Two type of ITO which deposit in the lung mainly impacts respiratory system and may injure liver or kidney. After sub-acute exposure to ITO, inflammation featured by neutrophils infiltration and fibrosis with both dose and size effects have been observed. Our findings revealed toxicokinetics and dose-dependent pulmonary toxicity in mice via oropharyngeal aspiration exposure, also replenish in vivo risk assessment of ITO. Collectively, these data indicate that under the current OEL, there are potential toxic effects after exposure to the ITO particles. The observed size-dependent biodistribution patterns and toxic effect might be important for approaching the hazard potential of small-sized ITO in an occupational environment.

Photocatalytic degradation is an attractive strategy to purify waste water contaminated by macromolecular organics. Compared with the single-component photocatalysts, heterostructures of different semiconductors have been widely used to improve the photocatalytic performance. In this work, we fabricate a hetero-structured photocatalyst consisting of two-dimensional graphitic carbon nitride (g-C3N4) nanosheets and commercial MoO3 microparticles through a simple mixing and annealing process. The photocatalytic performance was evaluated in various dye degradation reactions, especially Rhodamine (RhB) degradation. The MoO3/g-C3N4 composite shown a significant improvement compared with individual MoO3 or g-C3N4 as well as their physical mixture. By applying electron spin resonance (ESR) spin-trap spectra, radical scavenge experiments and electrochemical analysis, we find that a direct Z-scheme charge transfer between MoO3 and g-C3N4 not only causes an accumulation of electrons in g-C3N4 and holes in MoO3, but also boosts the formation of superoxide radical and hydroxyl radical. The superoxide radical and hole dominate the photocatalytic degradation, while the hydroxyl radical plays a negligible role and its production can be suppressed by lowering the pH value.

Fly ash (FA), a solid waste generated in thermal power plants, is considered an environmental pollutant. Therefore, measures must be taken to dispose of FA in an environmentally friendly manner. In this paper, an electrospinning technique was employed to incorporate FA particles onto zinc oxide nanofibers (ZnO NFs), and the product (FA/ZnO composite) was used for the removal of methylene blue (MB) from the water. Herein, ZnO NFs may serve as effective semiconductor photocatalysts and provide sufficient surface area for FA, while the FA particles serve as an effective adsorbent. The adsorption capacity and photocatalytic efficiency of the as-synthesized nanocomposite fibers were enhanced compared to those of the pristine ZnO NFs, and this result is attributed to the uniform distribution of FA on the surface of the ZnO NFs. The as-synthesized nanocomposite could have great significance in wastewater treatment.

Particulate matter (PM) can strongly affect redox biochemistry and therefore induce the response of the immune system and aggravate the course of autoimmune diseases. Nanoparticles containing transition metal compounds possessing semiconductor properties (TiO2, ZnO) may act as photocatalysts and accelerate the generation of reactive oxygen species (ROS) and reactive nitrogen species (RNS). In this study, the NIST standard reference material, SRM 1648a, has been analyzed in terms of this consideration. Organic compounds present in SRM 1648a were removed by cold oxygen plasma treatment. Samples of SRM 1648a with removed organic content (<2% of organic carbon, <1% of nitrogen) were obtained within 2 h of this treatment. The treatment did not affect the morphology of the powder. The reference material and PM2.5 collected in Kraków are composed of smaller particles and nanoparticles forming aggregates. The efficiency of (photo)generation of hydroxyl radicals and singlet oxygen was compared for original and organics-free samples. The analyzed samples showed the highest activity towards ROS generation when exposed to UV-vis-NIR light, moderate under UV irradiation, and the lowest in dark. Data collected in the present study suggest that the organic fraction is mostly responsible for singlet oxygen generation, as almost twice higher efficiency of 1O2 generation was observed for the original NIST sample compared to the material without the organic fraction. However, particulate matter collected in Kraków was found to have a five times higher activity in singlet oxygen generation (compared for original NIST and Kraków dust samples).

Antimicrobial nanomaterials provide numerous opportunities for the synthesis of next-generation sustainable water disinfectants. Using the keywords graphene and water disinfection and graphene antibacterial activity, a detailed search of the Scopus database yielded 198 and 1433 studies on using graphene for water disinfection applications and graphene antibacterial activity in the last ten years, respectively. Graphene family nanomaterials (GFNs) have emerged as effective antibacterial agents. The current innovations in graphene-, graphene oxide (GO)-, reduced graphene oxide (rGO)-, and graphene quantum dot (GQD)-based nanocomposites for water disinfection, including their functionalization with semiconductor photocatalysts and metal and metal oxide nanoparticles, have been thoroughly discussed in this review. Furthermore, their novel application in the fabrication of 3D porous hydrogels, thin films, and membranes has been emphasized. The physicochemical and structural properties affecting their antibacterial efficiency, such as sheet size, layer number, shape, edges, smoothness/roughness, arrangement mode, aggregation, dispersibility, and surface functionalization have been highlighted. The various mechanisms involved in GFN antibacterial action have been reviewed, including the mechanisms of membrane stress, ROS-dependent and -independent oxidative stress, cell wrapping/trapping, charge transfer, and interaction with cellular components. For safe applications, the potential biosafety and biocompatibility of GFNs in aquatic environments are emphasized. Finally, the current limitations and future perspectives are discussed. This review may provide ideas for developing efficient and practical solutions using graphene-, GO-, rGO-, and GQD-based nanocomposites in water disinfection by rationally employing their unique properties.

Two areas in central-southern Italy Land of Fires in Campania and Valley of Sacco river in Lazio are known to be contaminated sites, the first due to illegal fly-tipping and toxic fires, and the second due to an intensive industrial exploitation done by no-scruple companies and crooked public administration offices with dramatic consequences for environment and resident people. The work is intended to contribute to Human BioMonitoring (HBM) studies conducted in these areas on healthy young male population by a semiconductor gas sensor array trained by SPME-GC/MS. Human semen, blood and urine were investigated. The fingerprinting of the Volatile Organic Compounds (VOCs) by a gas sensors system allowed to discriminate the different contamination of the two areas and was able to predict the chemical concentration of several VOCs identified by GC/MS.

Although secondary minerals have great potential for heavy metal removal, their impact on chromium biogeochemistry in subsurface environments associated with dissimilatory iron reducing bacteria (DIRB) remains poorly characterized. Here, we have investigated the mechanisms of biogenic secondary minerals on the rate of Cr(VI) bioreduction with shewanella oneidensis MR-1. Batch results showed that the biogenic secondary minerals, schwertmannite and jarosite, appreciably increased the Cr(VI) bioreduction rate. UV–vis diffuse reflection spectra showed that schwertmannite and jarosite are semiconductive minerals, which can be activated by MR-1, followed by transferred conduction electrons toward Cr(VI). Cyclic voltammetry and Tafel analysis suggested that the resistance of secondary minerals is a dominant factor controlling Cr(VI) bioreduction. In addition, Cr(VI) adsorption on secondary minerals through ligand exchange promoted Cr(VI) bioreduction by decreasing the electron transfer distance between MR-1 and chromate. Fe(III)/Fe(II) cycling in schwertmannite and jarosite also contributed to Cr(VI) bioreduction as reflected by X-ray photoelectron spectroscopy and Fourier transform infrared spectrometer. Complementary characterizations further verified the contributions of Fe(III)/Fe(II) cycling, Cr(VI) adsorption, and conduction band electron transfer to enhanced Cr(VI) bioreduction. This study provides new insights on the understanding of Cr(VI) bioreduction by semiconductor minerals containing sulfate in subsurface environments.

The extensive use of semiconducting nanoparticles such as quantum dots in biomedical and industrial products can lead to their inadvertent release into the freshwater system. Natural exudates in the aquatic system comprising extracellular polymeric substance (EPS) and protein-rich metabolites can eventually adsorb onto the quantum dots (QDs) surface and form an eco-corona. The alterations in the physio-chemical and toxicological behavior of CdSe/ZnS QDs under the influence of eco-corona in the freshwater system have not been explored yet. In the present study, lake water medium conditioned with exudate secreted by Scenedesmus obliquus was utilized as an eco-corona forming matrix. The time-based evolution of the eco-corona on the differently charged CdSe/ZnS QDs was analyzed using transmission electron microscopy and dynamic light scattering. Aging of amine-QDs in algal exudate for 72 h showed enhanced aggregation (Mean Hydrodynamic Diameter- 1969 nm) as compared to carboxyl-QDs (1543 nm). Further, eco-coronation tends to impart an overall negative charge to the QDs. The fluorescence intensity of amine-QDs was quenched by 84% due to the accumulation of higher eco-corona. An integrative effect of surface charge and accumulated eco-corona layer influenced the Cd²⁺ ion leaching from the QDs. An enhancement in the algal cell viability treated with carboxyl - CdSe/ZnS (90%) and amine- CdSe/ZnS QDs (94%) aged for 72 h suggested that eco-corona can effectively mitigate the inherent toxicity of the QDs. The oxidative stress markers in the algal cells (LPO, SOD, and CAT) were in correlation with the cytotoxicity results. The algal photosynthetic efficiency depended on the deposition of eco-coronated QDs on the cell surface. Cellular uptake results indicated low Cd²⁺ concentration of nearly 13.9 and 11.5% for carboxyl- and amine- CdSe/ZnS QDs respectively. This suggests that eco-coronation directly influences the bioavailability of engineered nanoparticles.

For divalent metals, the Biotic Ligand Model (BLM) has been proven to be an effective tool to predict biological effects by taking into account speciation calculations and competitive interactions. Nonetheless, the BLM has only rarely been validated for trivalent metals (e.g. rare earth elements), and the potential competitive effects of protons has been understudied. In this paper, the short-term biouptake of indium (In), a trivalent metal that is a byproduct of zinc extraction and used in numerous applications including the semiconductor industry, was evaluated under controlled conditions. Short-term (i.e. 60 min) indium biouptake by Chlamydomonas reinhardtii was measured as a function of pH in order to verify the validity of the BLM. At a given pH, In biouptake could be well described by the Michaelis-Menten equation with conditional stability constants of KIn,pH=4.0 = 106.7 M-1, KIn,pH=5.0 = 108.6 M-1, KIn,pH=6.0 = 109.3 M-1 and maximum internalization fluxes of Jmax, pH=4.0 = 0.74 × 10−14 mol cm−2 s−1, Jmax, pH=5.0 = 1.60 × 10−14 mol cm−2 s−1, Jmax, pH=6.0 = 2.22 × 10−14 mol cm−2 s−1. Although several potential mechanisms for the role of pH were examined, the results were best explained by a competitive interaction of H+ with the In uptake sites using overall stability constants of logKIn = 9.76 M-1 and logKH = 15.66 M-1. Based on these results, pH will play a critical role in bioavailability measurements of the trivalent cations in natural waters.

As a semiconductor with wide band gap energy, TiO2 nanoparticles (nano-TiO2) are highly photoactive, and recent efforts have demonstrated phototoxicity of nano-TiO2 to aquatic organisms. However, a dosimetry model for the phototoxicity of nanomaterials that incorporates both direct UV and photo-activated chemical toxicity has not yet been developed. In this study, a set of Hyalella azteca acute toxicity bioassays at multiple light intensities and nano-TiO2 concentrations, and with multiple diel light cycles, was conducted to assess how existing phototoxicity models should be adapted to nano-TiO2. These efforts demonstrated (a) adherence to the Bunsen-Roscoe law for the reciprocity of light intensity and time, (b) no evidence of damage repair during dark periods, (c) a lack of proportionality of effects to environmental nano-TiO2 concentrations, and (d) a need to consider the joint effects of nano-TiO2 phototoxicity and direct UV toxicity.