Уточнить поиск
Результаты 1-10 из 35
Graphene-based nanocomposites and nanohybrids for the abatement of agro-industrial pollutants in aqueous environments
2022
Farhan, Ahmad | Rashid, Ehsan Ullah | Waqas, Muhammad | Ahmad, Haroon | Navāz, Shāhid | Munawar, Junaid | Rahdar, Abbas | Varjani, Sunita | Vēlāyutan̲, T. A.
Incessant release of a large spectrum of agro-industrial pollutants into environmental matrices remains a serious concern due to their potential health risks to humans and aquatic animals. Existing remediation techniques are unable to remove these pollutants, necessitating the development of novel treatment approaches. Due to its unique structure, physicochemical properties, and broad application potential, graphene has attracted a lot of attention as a new type of two-dimensional nanostructure. Given its chemical stability, large surface area, electron mobility, superior thermal conductivity, and two-dimensional structure, tremendous research has been conducted on graphene and its derived composites for environmental remediation and pollution mitigation. Various methods for graphene functionalization have facilitated the development of different graphene derivatives such as graphene oxide (GO), functional reduced graphene oxide (frGO), and reduced graphene oxide (rGO) with novel attributes for multiple applications. This review provides a comprehensive read on the recent progress of multifunctional graphene-based nanocomposites and nanohybrids as a promising way of removing emerging contaminants from aqueous environments. First, a succinct overview of the fundamental structure, fabrication techniques, and features of graphene-based composites is presented. Following that, graphene and GO functionalization, i.e., covalent bonding, non-covalent, and elemental doping, are discussed. Finally, the environmental potentials of a plethora of graphene-based hybrid nanocomposites for the abatement of organic and inorganic contaminants are thoroughly covered.
Показать больше [+] Меньше [-]Thermal, hygric, and environmental performance evaluation of thermal insulation materials for their sustainable utilization in buildings
2021
Wi, Seunghwan | Park, Ji Hun | Kim, Young Uk | Yang, Sungwoong | Kim, Sumin
As energy use in the building sector is increasing worldwide, building materials with characteristics that save energy are becoming increasingly important; in addition, there is an emerging need for high-performance insulation materials with low thermal conductivity. However, thermal insulation should consider thermal conductivity, which is the main performance parameter, in addition to the water adsorption rate, acidity, and deformation and expansion due to drying conditions. This study evaluated the main performance of 21 insulation materials used at construction sites to objectively and clearly evaluate their overall performance, including their thermal conductivity. Thermal conductivity was measured by the heat flow meter method according to ASTM C518 and ISO 8301 standards; it was also evaluated according to the drying conditions. The water absorption rate was evaluated by ISO 2896 to ensure the sustainability and long-term thermal conductivity performance of the material. Acidity was evaluated with ASTM E861 to reduce the environmental load of the buildings and soil. The results of this study reviewed an appropriate method to measure the main performance according to the type of insulation.
Показать больше [+] Меньше [-]Ignitability of crude oil and its oil-in-water products at arctic temperature
2017
Ranellone, Raymond T. | Tukaew, Panyawat | Shi, Xiaochuan | Rangwala, Ali S.
A novel platform and procedure were developed to characterize the ignitability of Alaska North Slope (ANS) crude oil and its water-in-oil products with water content up to 60% at low temperatures (−20–0°C). Time to ignition, critical heat flux, in-depth temperature profiles were investigated. It was observed that a cold boundary and consequent low oil temperature increased the thermal inertia of the oil/mixture and consequently the time to sustained ignition also increased. As the water content in the ANS water-in-oil mixture increased, the critical heat flux for ignition was found to increase. This is mainly because of an increase in the thermal conductivity of the mixture with the addition of saltwater. The results of the study can be used towards design of ignition strategies and technologies for in situ burning of oil spills in cold climates such as the Arctic.
Показать больше [+] Меньше [-]Effect of active multi-walled carbon nanotubes (MWCNT) on the energy storage density of DI water for cool thermal storage system
2022
Sathishkumar, Anbalagan | Cheralathan, Marimuthu
The present research work aims to investigate the energy saving aspects in cool thermal energy storage system (CTES) by improving the thermophysical properties of deionized (DI) water. The influence of phase change enthalpy, specific heat, thermal conductivity, and cooling rate of the DI water for the dispersion of chemically functionalized multi-walled carbon nanotubes (f-MWCNT) is studied experimentally. The covalent functionalization method is used to modify the surface of the multi-walled carbon nanotubes (MWCNT) with the use of concentrated nitric acid. The nanofluid phase change materials (PCMs) in different mass concentrations (0.25%, 0.50%, and 0.75%) were prepared by dispersions of the f-MWCNT in DI water. The minimum reduction in enthalpy (4.01%) was recorded for the nano-PCM with 0.75% f-MWCNT as compared to the base PCM with 0.5% of sodium dodecyl benzene-sulfonate (10%). The thermal conductivity enhancement of 53.15% and 28.2% was recorded in both states for the nano-PCM (with 0.75%) at the temperature of − 10 °C and 5 °C respectively. Also, the enhancement of 30% and 23% in cooling rate is recorded for the dispersion of maximum concentration of f-MWCNT at the HTF temperatures of − 8 °C and − 6 °C, respectively. It is proven from the above findings that the dispersion of f-MWCNT reduces the subcooling and facilitates the running of the CTES system at a higher operating temperature.
Показать больше [+] Меньше [-]Exploring the thermo-physical characteristic of novel multi-wall carbon nanotube—Therminol-55-based nanofluids for solar-thermal applications
2022
GaneshKumar, Poongavanam | Sakthivadivel, Duraiswamy | Prabakaran, Rajendran | Vigneswaran, Shanmugarajan | SakthiPriya, Manivannan | Thakur, Amrit Kumar | Sathyamurthy, Ravishankar | Kim, Sung Chul
This work aims to develop a novel nanofluid using Therminol-55 (T-55) as heat transfer fluid and multi-wall carbon nanotubes (MWCNTs) as dispersants with various volume concentrations of 0.05, 0.1, 0.3, and 0.5% and assess its thermo-physical properties for solar-thermal applications. The pH values of nanofluid MWCNT/T-55 with various particle loading were too far-flung from the pH (I) value, which confirmed the good dispersion stability of nanofluid. The measured density shows tremendous deviation from predicted density with increasing MWCNT loading owing to the non-considering of microstructural parameters in Pak & Cho correlation predication. The highest augmentation in nanofluid thermal conductivity was 16.83% for 0.5 vol. % MWCNT at 60 °C. The maximum improvement in dynamic viscosity of nanofluid with 0.5 vol. % of MWCNT is found to be 44%, and this rise is reduced at higher temperatures. The thermal effectiveness of the nanofluids demonstrates that nanofluid with all volume fractions of MWCNTs was favorable at higher temperatures in the laminar region. Mouromtseff number ratio decreases with a rise in temperature and MWCNT volume concentration. It is concluded that the excellent thermo-physical properties and prolonged thermal stability of the MWCNT will be highly beneficial in improving the overall performance of various kinds of heat transfer fluids (HTFs) for process heating and solar-thermal applications.
Показать больше [+] Меньше [-]A comprehensive review on experimental, numerical and optimization analysis of EAHE and GSHP systems
2022
Noman, Syed | Tirumalachetty, Harinarayana | Athikesavan, Muthu Manokar
Geothermal energy is one type of renewable source of energy that can be used as shallow geothermal system for the use of cooling and heating of residential and commercial buildings. In this paper, an intense review is carried out on geothermal heating and cooling for air conditioning with a focus on Earth-Air Heat Exchanger (EAHE) and Ground Source Heat Pump (GSHP) systems. The study is carried out to understand the factors which have a significant effect on the performance of the EAHE and GSHP systems. This paper also focuses on the hybrid work of geothermal heating and cooling system with other forms of energy and provides benefits for designing efficient GSHP and EAHE systems. This study indicates that the important parameters for EAHE and GSHP systems are the thermal conductivity of soil, the water content present in the ground will significantly improve the performance of the systems, and further benefits are discussed in this study.
Показать больше [+] Меньше [-]Thermal, physical, mechanical and microstructural properties of dredged sediment-based ceramic tiles as substituent of kaolin
2022
Slimanou, Houssam | Baziz, Amina | Bouzidi, Nedjima | Quesada, Dolores Eliche | Tahakourt, Abdelkader
The aim of this study was to recycle dredged sediments as an alternative raw material in the production of ceramic tiles. The effect of the substitution of kaolin by raw sediment (HDS) and calcined sediment (HDSC) in the mixture of the ceramic tile samples sintered at 1100 and 1200 °C was studied. The samples were prepared with different proportions of HDS and HDSC (0, 10, 20 and 30 wt.%) substituting kaolin. The mineralogical analysis of the samples shows that mullite phase disappears in the samples incorporating raw sediments (HDS) and fired sediments (HDSC) leading to the formation of new crystalline phases such as anorthite and diopside.Moreover, ceramic tile samples with 20 wt.% of calcined sediment improve its densification and hence the compressive strength (171 MPa) and thermal conductivity (0.555 W/mK). An evaluation of the leaching was carried out in the ceramic samples, finding that the concentrations of heavy metals in the leachate were within the safety limit established by the USEPA. The heavy metals were immobilised in the ceramic matrix. Therefore, the results showed that dredged sediment (HDS) and calcined sediment (HDSC) could be used as substituent of kaolin to produce eco-friendly ceramic building materials as floor tile ceramics.
Показать больше [+] Меньше [-]Numerical characterization of the plasma arc with various Ar-CO2 mixtures
2021
Rajendran, Abiyazhini | Krishnaraj, Sowmiya | Kandasamy, Ramachandran | Chidambara Thanupillai, Balasubramanian
Plasma technology finds applications in many industrial areas. To improve the process efficiency, different plasma forming gases and their mixtures are used. Since CO₂ is economical and has high thermal conductivity, it is identified as a potential candidate in plasma material processing. However, the characteristics and merits of CO₂ plasma arc in material processing are scanty. In this work, a 2D model is built to simulate plasma arc with CO₂ and its mixtures with Ar. Effects of arc current, gas composition and arc length on the arc heating efficiency and arc characteristics are discussed. The arc size is strongly influenced by the gas composition at 200 A than at 100 A. Temperature distribution in the arcs is wider when CO₂ content is decreased. The effect of arc current on the arc heating efficiency is stronger at lower current. Results predicted by the present model are compared with measured data for model validation.
Показать больше [+] Меньше [-]An experimental investigation of a water desalination unit using different microparticle-coated absorber plate: yield, thermal, economic, and environmental assessments
2021
Thakur, Amrit Kumar | Sathyamurthy, Ravishankar | Sharshir, Swellam Wafa | Kabeel, Abd Elnaby | Manokar, Athikesavan Muthu | Zhao, Wensheng
This study aims to augment the performance of a solar desalination unit. To experimental examine this idea, a modified solar still with three different microparticles doped in black paint-coated absorber were designed, fabricated, and tested in Jaipur, India. Three different microparticles such as copper, aluminum, and tin with particle size of 50–80 μm with weight concentration of 10% were doped in black paint and then coated on the absorber of solar still. The coated absorber of solar still were compared with the conventional solar still without any microparticle coating to obtain the effect of different coating materials on the water productivity, thermal performance, economic, and environment-economics analysis of solar still. The result showed that under the water depth of 1 cm, coating of copper, aluminum, and tin on absorber augmented the full-day water yield by 33.13, 22.18, and 11.53%, compared to conventional solar still without any coating. In addition, full-day energy and exergy efficiency of solar still with copper-coated absorber exhibited maximum values compared to all other solar stills, owing to the higher thermal conductivity and excellent solar-thermal conversion behaviors of copper. The cost of water per liter estimated through economic analysis was found to be US $ 0.0074 for conventional solar still, which was significantly reduced to US $ 0.0066 in the case of solar still with copper-coated absorber along with the payback time of 2.7 months. The environment-economic assessment estimated that solar still with copper-coated absorber plate has reduced the 13.19 tons of CO₂ emission. It is concluded that augmented heat transfer rate from water basin to inner glass surface through utilization of microparticle coating would pave a pathway to develop energy-efficient low-cost solar-based desalination system.
Показать больше [+] Меньше [-]Thermo-mechanical properties and sustainability analysis of newly developed eco-friendly structural foamed concrete by reusing palm oil fuel ash and eggshell powder as supplementary cementitious materials
2021
Jhatial, Ashfaque Ahmed | Goh, Wan Inn | Mastoi, Aamir Khan | Rahman, Amirul Faiz | Kamaruddin, Sufian
The production of cement contributes to 10% of global carbon dioxide (CO₂) pollution and 74 to 81% towards the total CO₂ pollution by concrete. In addition to that, its low strength-to-weight ratio, high density and thermal conductivity are among the few limitations of heavy weight concrete. Therefore, this study was carried out to provide a solution to these limitations by developing innovative eco-friendly lightweight foamed concrete (LFC) of 1800 kg/m³ density incorporating 20–25% palm oil fuel ash (POFA) and 5–15% eggshell powder (ESP) by weight of total binder as supplementary cementitious material (SCM). The influence of combined utilization of POFA and ESP on the fresh state properties of eco-friendly LFC was determined using the J-ring test. To determine the mechanical properties, a total of 48 cubes and 24 cylinders were prepared for compressive strength, splitting tensile strength and modulus of elasticity each. A total of 24 panels were prepared to determine the thermal properties in terms of surface temperature and thermal conductivity. Furthermore, to assess the environmental impact and eco-friendliness of the developed LFC, the embodied carbon and eco-strength efficiency was calculated. It was determined that the utilization of POFA and ESP reduced the workability slightly but enhanced the mechanical properties of LFC (17.05 to 22.60 MPa compressive strength and 1.43 to 2.61 MPa tensile strength), thus satisfies the ACI213R requirements for structural lightweight concrete and that it can be used for structural applications. Additionally, the thermal conductivity reduced ranging from 0.55 to 0.63 W/mK compared to 0.82 W/mK achieved by control sample. Furthermore, the developed LFC showed a 16.96 to 33.55% reduction in embodied carbon and exhibited higher eco-strength efficiency between 47.82 and 76.97%. Overall, the combined utilization of POFA and ESP as SCMs not only enhanced the thermo-mechanical performance, makes the sustainable LFC as structural lightweight concrete, but also has reduced the environmental impacts caused by the disposal of POFA and ESP in landfills as well as reducing the total CO₂ emissions during the production of eco-friendly LFC.
Показать больше [+] Меньше [-]