The main goal of the study was to look at the properties of waste, treatment options, and disposal techniques. Furthermore, waste circulation variables in the textile and apparel sectors in Sri Lanka’s Biyagama Industrial Processing Zone were calculated. The types, volumes, and per capita waste generation of ten industries were analyzed, as well as waste management activities such as trash minimization, handling, storing, recirculation, and disposal. The information was gathered using questionnaires, interviews, and field observations. According to the findings, the total industrial waste generation rate was 13792.5 tonnes per year, with 5926 tonnes per year designated as hazardous waste materials (42.9%). Furthermore, the waste generation rate per capita was 0.93 kg. The waste circulation factor was 0.38, according to the findings. The findings of the study highlight the necessity for integrated waste management methods in the textile and apparel industries.

Studies are presented in the context of the past attempts at finding nanocatalysts that can boost the performance of microbial fuel cells (MFCs) ─ in terms of waste treatment and energy generation. Given the great potential of biomimetically synthesized nanoparticles (BMNPs) in providing less expensive and more environmentally friendly alternatives to NPs synthesized by physical and chemical methods, as well as a near-total lack of previous work in this area, the current research was undertaken. Effect of gold and silver nanoparticles (NPs), synthesized biomimetically using five freely available weeds, was assessed as catalysts in the MFCs. In all cases, the nanoparticles were seen to enhance the coulombic efficiency (reflective of the reduction in the waste’s organic carbon load), maximum attainable power density, and overall energy yield of the MFCs by >200% relative to the uncatalyzed MFCs. Gold nanoparticles were more effective than silver nanoparticles by ≥ 20%. The results reveal that biomimetically synthesized NPs can be highly effective in reducing the operational costs as well as ecological footprints of MFCs and further work should be focused on NPs of non-precious metals.

The availability of organic matters in vast quantities from the agricultural/industrial practices has long been a significant environmental challenge. These wastes have created global issues in increasing the levels of BOD or COD in water as well as in soil or air segments. Such wastes can be converted into bioenergy using a specific conversion platform in conjunction with the appropriate utilization of the methods such as anaerobic digestion, secondary waste treatment, or efficient hydrolytic breakdown as these can promote bioenergy production to mitigate the environmental issues. By the proper utilization of waste organics and by adopting innovative approaches, one can develop bioenergy processes to meet the energy needs of the society. Waste organic matters from plant origins or other agro-sources, biopolymers, or complex organic matters (cellulose, hemicelluloses, non-consumable starches or proteins) can be used as cheap raw carbon resources to produce biofuels or biogases to fulfill the ever increasing energy demands. Attempts have been made for bioenergy production by biosynthesizing, methanol, n-butanol, ethanol, algal biodiesel, and biohydrogen using different types of organic matters via biotechnological/chemical routes to meet the world’s energy need by producing least amount of toxic gases (reduction up to 20–70% in concentration) in order to promote sustainable green environmental growth. This review emphasizes on the nature of available wastes, different strategies for its breakdown or hydrolysis, efficient microbial systems. Some representative examples of biomasses source that are used for bioenergy production by providing critical information are discussed. Furthermore, bioenergy production from the plant-based organic matters and environmental issues are also discussed. Advanced biofuels from the organic matters are discussed with efficient microbial and chemical processes for the promotion of biofuel production from the utilization of plant biomasses.

Efficient extracellular electron transport is a key for sufficient bioremediation of organoarsenic pollutants such as 4-hydroxy-3-nitrobenzenearsonic acid (roxarsone). The related apparent kinetics characteristics are essential for engineering practice of bioremediation activities and for full understanding the environmental fate of roxarsone, yet remains poorly understood. We report, to our knowledge, the first study of the electron transfer characteristics between roxarsone and participating S. oneidensis MR-1. The electron transfer rate during roxarsone biotransformation was estimated up to 3.1 × 10⁶ electrons/cell/s, with its value being clearly associated with the apparent roxarsone concentration. Lowing roxarsone concentration extended the average separation distance between cells and neighboring roxarsone molecules and thereby augmented electric resistance as well as extended cell movement for foraging, thus reduced electron transfer rate. In addition, the presence of roxarsone significantly stimulated population growth of S. oneidensis MR-1 with nearly doubled maximum specific growth rate, albeit with clearly increased lag time, as compared with that of none-roxarsone scenario. These findings provide, at the first time, basic biostoichiometry of S. oneidensis MR-1 induced roxarsone biotransformation, which may shed lights for full understanding of roxarsone transformation process in waste treatment systems that are necessary for engineering practice and/or environmental risks assessment.

The use of the phenicol antibiotic florfenicol in livestock can select for the optrA gene, which also confers resistance to the critically important oxazolidinone antibiotic linezolid. However, the occurrence and dissemination of florfenicol and linezolid cross-resistance genes in anaerobic treatment systems for livestock waste are unknown. Herein, the phenotypes and genotypes (optrA, fexA, fexB, and cfr) of florfenicol and linezolid cross-resistance were investigated in 339 enterococci strains isolated from lab- and full-scale mesophilic anaerobic digestion systems treating swine waste. It was found that optrA, fexA, and fexB were frequently detected in isolated enterococci in both systems by PCR screening, whereas cfr was not detected. The most abundant gene was optrA, which was detected in 73.5% (n = 50) and 38.9% (n = 23) of enterococci isolates in the full-scale influent and effluent, respectively. Most strains carried more than two resistance genes, and the average percentage of co-occurrence of optrA/fexA was 16.6%. Based on minimum inhibitory concentrations of the enterococci strain phenotypes, 85.7%, 77.5%, and 77.5% of strains in influent were resistant to chloramphenicol, florfenicol, and linezolid, respectively, while 56.3%, 65.2%, and 13% in the effluent isolates were found, respectively, which was consistent with the genotype results. The phenotypes and genotypes of florfenicol and linezolid resistance were relative stable in the enterococci isolated from the influent and effluent in lab-scale anaerobic digestion system. The findings signify the enterococci isolates harboring the optrA gene remained in effluents of both full- and lab-scale swine waste anaerobic digestion system; hence, effective management strategies should be implemented to prevent the discharge of antibiotic resistance from the livestock waste treatment systems.

The challenge of sludge digester liquor treatment is its high ammonium nitrogen (NH₄⁺-N) concentration. Early reports found that complete ammonia oxidation (comammox) was not present and anaerobic ammonia oxidation (anammox) was difficult to achieve in most sludge digester liquor treatments. In this study, NH₄⁺-N removal by cooperation between partial-nitrification, comammox, and anammox processes was achieved in a sequencing batch reactor (SBR) for sludge digester liquor treatment. The results showed that 2100–2200 mg/L of NH₄⁺-N was removed in the SBR with 98.82% removal efficiency. In addition, 55.11% of NH₄⁺-N was converted to nitrite nitrogen (NO₂⁻-N) by partial-nitrification, 25.43% of NH₄⁺-N was converted to nitrate nitrogen (NO₃⁻-N) by comammox, and 18.28% of NH₄⁺-N was removed by anammox. During the operation, in the SBR, the relative abundance of the dominant ammonia-oxidizing bacteria (Chitinophagaceae) was 18.89%, that of the dominant anammox bacteria (Candidatus Kuenenia) was 0.10%, and that of the dominant comammox bacteria (Nitrospira) was 0.20%. Therefore, the high nitrogen removal efficiency in this system was considered the result of the combination of the three processes. These results showed that comammox and anammox could play very important roles in nitrogen transformation and energy-saving in nitrogen removal systems.

We investigated whether there might be excess ovarian cancer mortality among women residing near Spanish industries, according to different categories of industrial groups and toxic substances. An ecologic study was designed to examine ovarian cancer mortality at a municipal level (period 1997–2006). Population exposure to pollution was estimated by means of distance from town to facility. Using Poisson regression models, we assessed the relative risk of dying from ovarian cancer in zones around installations, and analyzed the effect of industrial groups and pollutant substances. Excess ovarian cancer mortality was detected in the vicinity of all sectors combined, and, principally, near refineries, fertilizers plants, glass production, paper production, food/beverage sector, waste treatment plants, pharmaceutical industry and ceramic. Insofar as substances were concerned, statistically significant associations were observed for installations releasing metals and polycyclic aromatic chemicals. These results support that residing near industries could be a risk factor for ovarian cancer mortality.

Coastal water quality in China has been impacted by direct discharge of industrial wastewater, and various kinds of AOX pollutants have been detected in the seawater and sediment. As the dominant pollution source of Hangzhou Bay, a typical fine chemical industry park “HSEDA” was selected as the study area in this research. The AOX in both wastewater and sludge phases from 22 large-scaled enterprises were simultaneously investigated. The results quantitatively illustrated the AOX flows from engineered wastewater and sludge treatment systems to natural environment. It can be seen that industrial enterprises discharged at least 160 t AOX every year, and about 105.4 t/a AOX eventually entered the natural environment. The dye manufacturing industry, which accounted for more than 60% of the total AOX emission load in HSEDA, was identified as the AOX pollution-intensive sector. The occurrence, characteristic pollutants and fate of AOX in dye wastewater were discussed, on the basis of which the improvements of cleaner production and wastewater treatment technologies have been put forward.

Many aspects of modern life of our civilization are associated with using electrical and electronic devices (EEE). Ever-increasing demand for high-performance EEE and accelerated technological development make the replacement of EEE become frequent. This leads to the generation of a tremendous amount of electronic waste (E-waste). Challenges of the management of E-waste have recently arisen out of a dearth of proper technologies to treat E-waste. Pyrolysis process can thermochemically treat waste materials that have a complicated nature and inhomogeneity. This article gives a systematic review as an effort to tackle the challenges in the context of achievements in pyrolysis process in E-waste management sector. Pyrolysis mechanism and types of pyrolysis processes and pyrolysis reactors are first discussed. Various pyrolysis technologies applied to the E-waste treatment are then summarized and compared to each other. Points to be considered for further research and pending challenges of E-waste pyrolysis are also discussed. The pyrolysis treatment of E-waste is not yet fully industrialized mostly because of high costs. However, there should be much room for further developing the E-waste pyrolysis; hence, its industrialization and commercialization is just a matter of time.

Water bodies contain a large number of harmful environmental pollutants, including oil, heavy metal ions and dyes, which has become a major global problem. The current work focusses on the development and future prospect of sustainable application of biodegradable cellulose-biomass materials in water treatment, considering that they show an important prospect in wastewater treatment. This paper summarizes the advantages and disadvantages of cellulose-biomass materials in removing harmful substances and pollutants from water and the key problems the technology faces. Cellulose-biomass material has unique structure, is environment friendly, degradable, renewable and provides low energy cost benefits, among other advantages. In this paper, the research progress of wastewater treatment in recent years is reviewed from the following three aspects: oil-water separation, heavy metal ions in water, and dye adsorption. The future research direction is also discussed.