Уточнить поиск
Результаты 1-10 из 63
Synthesis and Photocatlytic Application of Drinking Water Treatment Sludge @ TiO2 Composite for Degradation of Methylene Blue Dye
2020
Rashed, M.N. | El Taher, M. A. | Fadlalla, S. M. M.
Sludge/TiO2 composite was synthesized from drinking water treatment sludge, as a waste material and TiO2 , by a sol- gel method. Various sludge adsorbent / TiO2 ratios (1:1, 1:2 and 2:1 w/w) were prepared, and characterized by transmission electron microscope (TEM), X-ray diffraction (XRD), X-ray Fluorescence (XRF), and BET. The prepared composites were applied successfully for photodegradation of methylene blue (MB) dye from a solution. The photocatalytic degradation of MB dye was investigated using UV irradiation, or UV/H2O2. Initial dye concentration, solution pH, composite dosage, and UV irradiation time were applied to study the optimum conditions for MB degradation. The results revealed the highest MB dye degradation with composite (2:1). It was found that the maximum MB degradation efficiency was at pH=7, 4 h irradiation time, 0.125 g composite dose, and 50 ppm initial dye concentration. MB removal efficiency was 95.7% using UV irradiation, and 99.8% of that using UV/ H2O2. The rate of MB dye degradation followed the first order kinetics. Results from this study offer the best conditions for recycling drinking water treatment sludge, and use it for wastewater treatment.
Показать больше [+] Меньше [-]Optimization of Crystal Violet Adsorption by Chemically Modified Potato Starch Using Response Surface Methodology
2020
Bahrami, M. | Amiri, M. J. | Bagheri, F.
In this research, a response surface methodology (RSM) was used to investigate the effects of independent parameters (pH, contact time, temperature, adsorbent dosage, and initial concentration of pollutant), their simultaneous interactions, and quadratic effects on crystal violet adsorption onto two starch based materials in the form of batch experiments. The characterizing results indicated that there is no significant difference between the potato starch and synthesized starch phosphate, as phosphorylation has not changed the crystalline structure of starch inside the granules. The maximum removal efficiency of crystal violet ions was obtained 99 % at the optimum adsorption conditions of initial concentration 213.54 mg/L, adsorbent dosage 0.25 g, contact time 14.99 min, temperature 15 °C, and initial pH of solution 9. RSM outputs showed that the maximum adsorption of crystal violet ions by could be achieved by raising pH and adsorbent dosage, and decreasing the initial crystal violet concentration. While temperature and contact time are not effective parameters in crystal violet removal from aqueous solutions using synthesized starch phosphate. Generally, the RSM model is suitable to optimize the experiments for dye elimination by adsorption, where the modified starch phosphate would be an effective adsorbent for treating crystal violet solution.
Показать больше [+] Меньше [-]Detection of Hg(II) in adsorption experiment by a lateral flow biosensor based on streptavidin-biotinylated DNA probes modified gold nanoparticles and smartphone reader
2020
Guo, Zizhang | Kang Yan, | Liang, Shuang | Zhang, Jian
The increased occurrence of Mercury (Hg II) contaminant has caused environmental and health concerns worldwide. Removal of Hg(II) from water is of significant interest, in particular if these can be coupled in a manner of detection. Here, a novel activated carbon (AC) adsorbent and a fast detection device to form a closed-cycle strategy was developed. The synthesis of conjugates of streptavidin-biotinylated DNA probes modified gold nanoparticle was used with lateral flow biosensors for Hg(II) detection. A quantification was completed via a self-developed smartphone app and its limit of detection was 2.53 nM. Moreover, AC was activated with a new activating agent of diammonium hydrogen phosphate. The adsorbent was characterized and determined to have an amorphous microporous structure with a high surface area (1076.5 m² g⁻¹) and demonstrated excellent removal efficiency (99.99%) and adsorption capacity (∼100 mg g⁻¹) for Hg(II). The kinetics of the pseudo-second-order model and the mechanisms of electrostatic adsorption, ion exchange, and complex reactions are provided. The proposed closed-cycle strategy can be useful for early, fast, and mobile detection of Hg (II) pollution, followed by its effective removal during water treatment.
Показать больше [+] Меньше [-]Synthesis and photocatalytic degradation activities of phosphorus containing ZnO microparticles under visible light irradiation for water treatment applications
2020
Saffari, Reyhaneh | Shariatinia, Zahra | Jourshabani, Milad
A series of phosphorus containing ZnO (P–ZnO) photocatalysts with various percentages of phosphorus were successfully synthesized using the hydrothermal method. The structural, physical and optical properties of the obtained microparticles were investigated using diverse techniques such as X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, ultraviolet–visible diffusion reflectance spectroscopy (UV–Vis DRS), photoluminescence (PL) spectroscopy, transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS) and N₂ adsorption-desorption analysis. The photocatalytic activities of the pure and P–ZnO samples were evaluated for the degradation of Rhodamine B (RhB) under visible light irradiation. The parameters such as pH, catalyst dosage, contaminant concentration and effect of persulfate as an oxidant were studied. It was found that the P–ZnO1.8% photocatalyst could destroy 99% of RhB (5 ppm) in 180 min at pH = 7; furthermore, it degraded ∼100% of 5 and 10 ppm of the RhB pollutant in 120 and 180 min, respectively, only by adding 0.01 g of persulfate into the reaction solution. To determine the photocatalytic mechanism, 2-propanol, benzoquinone and EDTA were used and it was indicated that hydroxyl radicals, superoxide ions and holes, all had major roles in the photocatalytic degradation but the hydroxyl radical effect was the most significant. The phenol degradation was also investigated using the P–ZnO1.8% optimum photocatalyst which could destroy 53% of the phenol (5 ppm) in 180 min. According to the reusability test, it was proved that after 5 cycles, the catalyst activity was not highly changed and it was potentially capable of pollutant degradation.
Показать больше [+] Меньше [-]Optimized parameters of the electrocoagulation process using a novel reactor with rotating anode for saline water treatment
2020
Al-Raad, Abbas A. | Hanafiah, Marlia M. | Naje, Ahmed Samir | Ajeel, Mohammed A.
In this study, a novel rotating anode-based reactor (RAR) was designed to investigate its effectiveness in removing dissolved salts (i.e., Br⁻, Cl⁻, TDS, and SO₄²⁻) from saline water samples. Two configurations of an impeller’s rotating anode with various operation factors, such as operating time (min), rotating speed (rpm), current density (mA/cm²), temperature (°C), pH, and inter-electrode space (cm), were used in the desalination process. The total cost consumed was calculated on the basis of the energy consumption and aluminum (Al) used in the desalination. In this respect, operating costs were calculated using optimal operating conditions. Salinity was removed electrochemically from saline water through electrocoagulation (EC). Results showed that the optimal adjustments for treating saline water were carried out at the following conditions: 150 and 75 rpm rotating speeds for the impeller’s rod anode and plate anode designs, respectively; 2 mA/cm² current density (I), 1 cm² inter-electrode space, 25 °C temperature, 10 min operation time, and pH 8. The results indicated that EC technology with impeller plates of rotating anode can be considered a very cost-effective technique for treating saline water.
Показать больше [+] Меньше [-]Micro-bubble flow simulation of dissolved air flotation process for water treatment using computational fluid dynamics technique
2020
Lee, Kyun Ho | Kim, Haedong | KuK, Jung Won | Chung, Jae Dong | Park, Sungsu | Kwon, Eilhann E.
A dissolved air flotation (DAF) system is one of the water treatment processes that purifies contaminants through a buoyancy effect by attaching the moiety of micro-bubbles on their free surface. Since the DAF system was first used in the drinking water treatment in the 1960s, it has been recognized as an effective treatment for the water purification process. Most previous works laid great emphasis on the internal flow behaviors of fluid to improve the purification efficiency of the DAF system. Nevertheless, the practical implementation with a pilot plant indeed revealed some technical incompleteness for the DAF system. To circumvent for the technical incompleteness, numerical simulation based on computational fluid dynamics (CFD) has been carried out to understand the in-depth knowledge on internal flow phenomena in the DAF system. However, the standard k-ε turbulence model has been conventionally used in the most studies without any proper consideration process. Accordingly, the objectives of this study were to investigate the major effects on the internal flow behaviors for an efficient numerical simulation of DAF when a different turbulence model and micro-bubble parameters are used. As a result, the present study found that the standard k-ε model would be not proper for the internal flow simulation of the DAF process and a careful consideration would be required for a more accurate prediction. In addition, the present study examined a desirable internal flow pattern with various operating conditions of the micro-bubble. Consequently, the main findings of this study are expected to provide realistic information to related researchers for designing the DAF system with the optimal operating parameters.
Показать больше [+] Меньше [-]Dissemination of antibiotic resistance genes (ARGs) via integrons in Escherichia coli: A risk to human health
2020
Zhang, Shaqiu | ʻAbbās, Muḥammad | Rehman, Mujeeb Ur | Huang, Yahui | Zhou, Rui | Gong, Siyue | Yang, Hong | Chen, Shuling | Wang, Mingshu | Cheng, Anchun
With the induction of various emerging environmental contaminants such as antibiotic resistance genes (ARGs), environment is considered as a key indicator for the spread of antimicrobial resistance (AMR). As such, the ARGs mediated environmental pollution raises a significant public health concern worldwide. Among various genetic mechanisms that are involved in the dissemination of ARGs, integrons play a vital role in the dissemination of ARGs. Integrons are mobile genetic elements that can capture and spread ARGs among environmental settings via transmissible plasmids and transposons. Most of the ARGs are found in Gram-negative bacteria and are primarily studied for their potential role in antibiotic resistance in clinical settings. As one of the most common microorganisms, Escherichia coli (E. coli) is widely studied as an indicator carrying drug-resistant genes, so this article aims to provide an in-depth study on the spread of ARGs via integrons associated with E. coli outside clinical settings and highlight their potential role as environmental contaminants. It also focuses on multiple but related aspects that do facilitate environmental pollution, i.e. ARGs from animal sources, water treatment plants situated at or near animal farms, agriculture fields, wild birds and animals. We believe that this updated study with summarized text, will facilitate the readers to understand the primary mechanisms as well as a variety of factors involved in the transmission and spread of ARGs among animals, humans, and the environment.
Показать больше [+] Меньше [-]A review of the potential utilisation of plastic waste as adsorbent for removal of hazardous priority contaminants from aqueous environments
2020
Zhang, Huiyi | Pap, Sabolc | Taggart, Mark A. | Boyd, Kenneth G. | James, Neil A. | Gibb, Stuart W.
There is growing global awareness of the presence and negative impacts of waste plastic in the marine environment. Risks to wildlife include ingestion and entanglement for macro-plastic (larger than 5 mm in length), alongside food chain transfer for micro-plastics (less than 5 mm in length). Plastics in the marine environment have also been shown to adsorb and accumulate contaminants from seawater, e.g., heavy metals and hydrophobic organic compounds. This means that plastics can additionally act as vectors for transport of contaminants, permitting ecotoxicological risks to be spatially extended. However, the ability of waste plastic to adsorb pollutants also offers potential opportunity, if they can be used for the decontamination of wastewater. Here, we provide an overview of marine plastic types and distribution, and then systematically assess their potential to be repurposed as novel adsorbents. Data published in recent years are interrogated to gain an overview of the interaction mechanisms between marine plastics and both organic and inorganic contaminants. In addition, factors that may be exploited to enhance their performance in removal of contaminants are also reviewed and prioritised, e.g., surface modification and activation. This paper highlights the novel potential of repurposing plastic waste for wastewater treatment applications and seeks to identify key knowledge gaps and future research priorities for scientists and engineers.
Показать больше [+] Меньше [-]Adsorption thermodynamics and kinetics of Advanced Green Environmental Media (AGEM) for nutrient removal and recovery in agricultural discharge and stormwater runoff
2020
Ordonez, Diana | Valencia, Andrea | Elhakiem, Hanan | Chang, Ni-Bin | Wanielista, Martin P.
Recycled materials were used in three types of green sorption media for nutrient removal and possible recovery in high nutrient-laden agricultural discharge and stormwater runoff. The three types of green sorption media included in this comparative study were two new aluminum-based green environmental media (AGEM) and one existing iron-filings based green environmental media (IFGEM). The corresponding adsorption isotherm, thermodynamics, and kinetics models were simulated based on isotherm studies to determine their removal efficiency and potential for recovery of nitrate, phosphate, and ammonia when used as a soil amendment in crop fields or in a filter for water treatment. AGEM-2 exhibited the shortest contact time required to achieve nutrient removal above 80% with an average of 7 h, followed by AGEM-1 and IFGEM with 10.6 and 28 h, respectively. Natural soil was included as a control and exhibited minimal nutrient removal. Ammonia, which may be recovered as fertilizer for drop fields in a soil-water-waste nexus, was generated by all three green sorption media mixes, therefore indicating their potential for use as soil amendments in agricultural and forested land after engineering filter applications. The kinetics analysis indicated that nitrate adsorption follows pseudo-first-order kinetics, while phosphate adsorption follows pseudo-second-order kinetics. The Gibbs free energy indicated that most of the adsorption reactions proceeded as exothermic. Lastly, a few equilibrium models, including the Langmuir, Freundlich, First Modified Langmuir, Temkin, Jovanovic, and Elovich models, were ranked and three were selected for use with IFGEM, AGEM-1, and AGEM-2, respectively, as below: (1) Langmuir, (2) Freundlich, and (3) First Modified Langmuir, according to three indices.
Показать больше [+] Меньше [-]Scenario-based pollution discharge simulations and mapping using integrated QUAL2K-GIS
2020
Ahmad Kamal, Norashikin | Muhammad, Nur Shazwani | Abdullah, Jazuri
Malaysia is a tropical country that is highly dependent on surface water for its raw water supply. Unfortunately, surface water is vulnerable to pollution, especially in developed and dense urban catchments. Therefore, in this study, a methodology was developed for an extensive temporal water quality index (WQI) and classification analysis, simulations of various pollutant discharge scenarios using QUAL2K software, and maps with NH₃–N as the core pollutant using an integrated QUAL2K-GIS. It was found that most of the water quality stations are categorized as Class III (slightly polluted to polluted). These stations are surrounded by residential areas, industries, workshops, restaurants and wet markets that contribute to the poor water quality levels. Additionally, low WQI values were reported in 2010 owing to development and agricultural activities. However, the WQI values improved during the wet season. High concentrations of NH₃–N were found in the basin, especially during dry weather conditions. Three scenarios were simulated, i.e. 10%, 50% and 70% of pollution discharge into Skudai river using a calibrated and validated QUAL2K model. Model performance was evaluated using the relative percentage difference. An inclusive graph showing the current conditions and pollution reduction scenarios with respect to the distance of Skudai river and its tributaries is developed to determine the WQI classification. Comprehensive water quality maps based on NH₃–N as the core pollutant are developed using integrated QUAL2K-GIS to illustrate the overall condition of the Skudai river. High NH₃–N in the Skudai River affects water treatment plant operations. Pollution control of more than 90% is required to improve the water quality classification to Class II. The methodology and analysis developed in this study can assist various stakeholders and authorities in identifying problematic areas and determining the required percentage of pollution reduction to improve the Skudai River water quality.
Показать больше [+] Меньше [-]