A dose–response study was performed in four commercial clones, Baldo (Populus deltoides), Jean Pourtet (Populus nigra), I-214 (Populus x euramericana) and Villafranca (Populus alba), to investigate the best performing species in terms of metal content and high metal resistance (absence of symptoms) useful in biomass production on contaminated water/land by zinc. Zinc (1 μM as control and 1 mM) was applied for 4 weeks in a hydroponic system. Clone Villafranca was the least damaged, while the most sensitive was clone I-214. The highest zinc concentration in all different parts of plants analysed was recorded in Villafranca > I-214 > Baldo > Jean Pourtet. The higher translocation factor was seen in Baldo, the lowest in Villafranca. Analyses of leaf damage showed a reduction on Chl a in young leaves (96 %) in I-214 stressed plants, whereas in Villafranca, Chl a was about double compared to the control. Regarding other photosynthetic pigments, violaxanthin was significantly correlated to zinc concentration in old leaves. The responses of clones to zinc (Zn) stress were specific: Villafranca was the most resistant, while I-214 showed the highest biomass production under Zn excess. Since these two clones have useful and complementary traits for uptake and detoxification while maintaining high biomass production under Zn excess, they are interesting candidates for understanding the key resistance mechanisms.

The purposes of this research were (1) to compare level of uptake and accumulation of Eu and Ce by wheat and rye seedlings grown in soil spiked with these metals, (2) to estimate short-term variations of Eu and Ce in soil and in plants and (3) to study effects of Eu and Ce accumulation on concentrations of other macro- and trace elements in the plants. The experiments were performed in a naturally illuminated greenhouse. Instrumental neutron activation analysis was used to determine concentrations of rare earth elements and essential nutrients and trace elements in the plants and soil. The experimental results indicate that addition of Eu and Ce to soil can lead to enhanced uptake of the trace elements by plants. Plants more easily accumulated Eu than Ce. Moreover, for rye, differences between amounts of Ce in the seedlings grown in Ce-spiked soil and in Ce-free soil were statistically insignificant. During the first hours after transfer of seedlings to soil spiked with Eu, concentration of Eu in the roots of both plant species increased significantly. An increase of leaf Eu concentration was also observed, however, these variations were not as marked as those in roots. During the following 10-day growth in the Eu-spiked soil, concentration of Eu in plants constantly increased. The bioaccumulation of Eu resulted in certain decrease of Eu in the rhizosphere soil. However, no variations in soil Ce concentrations were found. The accumulation of Eu and Ce in rye and wheat seedlings did not significantly affect concentrations of essential plant nutrients and other REEs.

Environmental pollution is one of the most serious causes of degradation of Mediterranean wetlands. Mercury (Hg) and cadmium (Cd) are of particular concern due to biomagnification. Here, we used red swamp crayfish (Procambarus clarkii) to monitor the spatial and temporal patterns of these two metals in a Portuguese rice field system. We sampled the crayfish in three different sites and three different time periods in the Sado River Basin (Portugal). We measured temperature, pH, total dissolved solids and conductivity in the water. Hg and Cd were measured in the crayfish abdominal muscle tissue and exoskeleton. In muscle, a spatial pattern was found for the accumulation of Cd while for Hg, only a temporal pattern emerged. The spatial pattern for Cd seemed to reflect the mining history of the sites, whereas the temporal pattern for Hg seemed related to the flooding of rice fields. We suggest that this flooding process increases Hg bioavailability.

The effect of anaerobic digestion (AD), coarse solids removal, and a manure additive More Than Manureᵀᴹ (MTMᵀᴹ) on ammonia (NH₃) emission from raw (Non AD) dairy manure and AD manure was studied during 110 days of storage. The study consisted of eight treatments in duplicate: AD manure and non AD manure, with and without coarse solids, and with and without MTMᵀᴹ additive. These studies were conducted in a naturally ventilated barn. The nitrogen content of manure, especially the ammoniacal nitrogen, played an important role in NH₃ emission. During the first 11 weeks of the storage, AD manure had significantly greater peak (33 to 38 ppm) concentrations of NH₃, and NH₃ fluxes (94 to 130 μg min⁻¹ m⁻²) compared to raw manure (14 to 25 ppm and 55 to 81 μg min⁻¹ m⁻², respectively). From the 11th week until the end of storage, there was no significant difference in NH₃ emissions across the manure treatments. The presence of course solids resulted in significanlty less peak NH₃ for non AD manure when data were evaluated for the whole storage period. The manure additive MTMᵀᴹ did not have a significant effect on NH₃ emissions during storage, however, temperature was positively related to NH₃ emissions. Total ammoniacal nitrogen and solids concentration in manure was the most important factors affecting NH₃ emissions during storage.

Many of municipal wastewater treatment plants (WWTPs) are operated by biological process with their excellent performances. However, the early warning system in the influent line is required to avoid the process malfunction because the biological wastewater treatment system has serious drawback to toxic chemicals in the influent. In order to develop a new type of biosensor using anaerobic granules in an online device for rapid detection of toxic inhibitory to the biological process, a porous pot reactor and an anaerobic granule biosensor (AGB) were demonstrated as an upset early warning device (UEWD) in this study. In the first group of toxic loading tests, the prepared cupric chloride solutions were separately injected into both the porous pot and AGB systems at six different concentrations, and phenol solutions were used at three different concentrations in the second group of tests. The results showed the chemical oxygen demand (COD) and ammonia nitrogen (ammonia-N) removal efficiency from porous pot reactor decreased dramatically in response to the addition of Cu²⁺and phenol with the variation of the oxidation-reduction potential (ORP) in AGB. The response of AGB system was 6 to 20 h in advance of porous pot reactor performance response, which suggests that the AGB could potentially be used as an online UEWD.

Bauxsol is a chemico-physically modified product of red mud and is a promising material for the removal and recovery of phosphorus from wastewater. In this study, response surface methodology (RSM) and artificial neural network (ANN) were employed to develop prediction models and also to investigate the interactions of independent experimental factors for phosphorus adsorption onto acid-activated Bauxsol. The experimental results indicated that HCl activation was effective to improve the adsorption capacity of Bauxsol. The maximum adsorption capacity of acid-activated Bauxsol was 55.72 mg/g (as P) with HCl concentration of 10.20 mol/L, temperature of 41.00 °C, and time of 5.60 h, which increased by 10.53 and 6.62 times compared with the raw red mud and Bauxsol before acid activation, respectively. The relative importance of HCl concentration in RSM and ANN models was 51.78 and 54.25 %, respectively, which illustrated that HCl concentration played the predominant role on improving the adsorption capacity of Bauxsol. The predictive capability of RSM and ANN models was compared, and the results showed that both models provided excellent predictions with R² > 0.93. However, the ANN model showed the superiority over RSM for estimation capability.

This paper reports about the modification of sand and fumed silica with titania in order to obtain a photocatalytic active material for the degradation of pollutants. The coating process was performed based on the sol–gel method. Tetrapropylorthotitanate was used as the titania precursor to apply a nanoscaled layer on sand grains. For silica fume, the coating process was varied. Various amounts of tetrapropylorthotitanate were used to obtain different coating thicknesses and to identify the maximum amount of titania that could be loaded on the material. All samples showed high photonic efficiencies in the degradation of nitrogen monoxide despite their low titania quantities, which were identified via x-ray fluorescence analysis. Some samples showed higher photonic efficiencies than commercial Degussa P25. Due to the preparation method, calcination of the sand composites was not necessary to yield a crystalline coating which was responsible for the high photocatalytic activity. However, silica fume composites had to be calcined possibly due to variation in the preparation method. Scanning electron micrographs revealed the structured morphology of all specimens. Energy dispersive x-ray analysis identified nanoscaled titania particles on the sand surface that could not be observed only via SEM. The results of this research are especially interesting for large scale applications of photocatalysts. As industrial sand and silica fume used are low cost materials, this new kind of photocatalyst can be applied in higher quantities and distributed onto larger areas, while saving costs at the same time.

The issue of air pollution has become the focus of the world because of its significant influence to the economic development and public health. This paper proposes an interval dual stochastic-mixed integer programming (IDSIP) approach for regional air quality management. The IDSIP approach can be effectively communicated into the optimization processes and resulting solutions, which is formulated through integrating interval-parameter integer programming (IIP) within a two-stage stochastic programming (TSP) joint chance-constrained programming (CCP) and could deal with uncertainties expressed as not only probability distributions but also interval values. Moreover, the left-hand-side (LHS) constraints with stochastic variables could be handled at different risk levels with varied reliability scenarios. In the modeling formulation, penalties are imposed when expected policies are violated. The results indicate that reasonable solutions for air quality management system have been generated, which can help decision makers draw up productive strategies taking into account the trade-off between system economy and air quality under uncertainty.

The composition of zooplankton, benthic macroinvertebrate (BMI) and forage fish communities of 20 lakes in and near Kejimkujik National Park and National Historic Site were evaluated as part of Environment Canada’s Acid Rain Biomonitoring Program. The pH of study lakes ranged from 4.3 to 6.6. Lake pH was positively correlated with alkalinity, calcium and magnesium concentrations and negatively correlated with colour, aluminium, total organic carbon and nitrogen. Gradients in overall BMI community composition and total BMI richness were strongly related to the gradient in pH, but the composition of zooplankton and forage fish communities were more strongly related to other environmental parameters such as elevation. Potential indicator species for future acid rain monitoring included Daphnia catawba, the amphipod Hyalella azteca, pill/pea clams Pisidium casertanum and Pisidium ferrugineum and larval water scavenger beetle Berosus. These chemical and biological data provide a baseline for future evaluation of the continued effects of anthropogenic deposition to this acid-sensitive region of Atlantic Canada.

Wastewater treatment works can receive toxic substances that can kill microorganisms responsible for waste degradation. Implementation of toxicity monitors in-sewer, as part of an early warning system to help prevent toxic substances entering treatment works, is, however, very rare. This work presents results from a pilot-scale study using an in-sewer early warning system based on detection of nitrous oxide (N₂O) gas emitted by nitrifying bacteria naturally present in sewer biofilm. Nitrous oxide has potential to be an indicator of nitrification inhibition as it is typically emitted when nitrifiers are under stress. The biofilm was allowed to develop over 14 days under fixed wastewater flow and level. Presence of nitrifying bacteria was verified on day 13 followed by a 90 min toxic shock on day 14 by four different known nitrification inhibitors. Pre-shock nitrification rates averaged 0.78 mg-NH₄⁺-N mg-VS⁻¹ d⁻¹and were significantly reduced post shock to <0.2 mg-NH₄⁺-N mg-VS⁻¹ d⁻¹. Nitrous oxide emissions were found to vary with influent wastewater quality, suggesting a more complex data processing algorithm is needed instead of a simple threshold emission value. The extent of nitrification inhibition differed from the recorded response for suspended growth biomass with allylthiourea resulting in a 77 and 81 % nitrification inhibition for literature suspended growth EC₅₀and EC₇₅concentrations, respectively. Results from this study suggest nitrifying biofilms in closed pipes can be used as part of an early warning system but will likely require amplification of the response to be of practical use. Further research is required to better understand the biofilm response and calibrate the early warning system for differentiating its unique baseline from true toxicity events.