This study aims to synthesize 2-hydroxyethyl acrylate (HEA) and 2-acrylamido-2-methylpropane sulfonic (AMPS) acid-based hydrogels by gamma radiation and to investigate their swelling behavior and heavy metal ion adsorption capabilities. The copolymer hydrogels prepared were characterized via scanning electron microscopy, Fourier transformed infrared spectra, thermal gravimetric analysis, and X-ray photoelectron spectroscopy. The research showed that the copolymer hydrogel was beneficial for permeation due to its porous structure. In addition, the experimental group A-2-d [70 % water volume ratio and (n (AMPS)/n (HEA)) = 1:1] was an optimal adsorbent. The optimal pH was 6.0 and the optimal temperature was 15 °C. Pb²⁺, Cd²⁺, Cu²⁺, and Fe³+ achieved adsorption equilibriums within 24 h, whereas Cr³⁺ reached equilibrium in 5 h. Pb²+, Cd²⁺, Cr³⁺, and Fe³⁺ maximum load capacity was 1,000 mg L⁻¹, whereas the Cu²⁺ maximum capacity was 500 mg L⁻¹. The priority order in the multicomponent adsorption was Cr³⁺>Fe³⁺>Cu²⁺>Cd²⁺>Pb²⁺. The adsorption process of the HEA/AMPS copolymer hydrogel for the heavy metal ions was mainly due to chemisorption, and was only partly due to physisorption, according to the pseudo-second-order equation and Langmuir adsorption isotherm analyses. The HEA/AMPS copolymer hydrogel was confirmed to be an effective adsorbent for heavy metal ion adsorption.

Sub-inhibitory concentrations of antibiotics, which are found in environmental water systems and sewage plants due to an increased use in therapeutical and preventive fields, influence bacterial behavior in biofilms. The application of sulfamethoxazole, erythromycin, and roxithromycin induced changes in biofilm dynamics regarding biomass formation, spatial structure and specific gene expression in different Pseudomonas aeruginosa isolates. Exposing multi-resistant environmental isolated strains for 17 h to environmental concentrations of antibiotics or wastewater, directly, an increase in biofilm biomass and thickness could be observed for each strain. Additionally, multi-resistant strains responded to the applied growth conditions with changes in transcriptional activity. Here, sub-inhibitory concentrations of macrolides specifically upregulated expression of quorum sensing genes (rhlR, lasI), whereas sulfonamides and municipal wastewater, instead upregulated expression of specific resistant genes (sul1) and efflux pumps (mexD). Antibiotic sensitive isolates demonstrated an overall higher transcriptionally activity, but did not show a specific gene response to the applied exogenous stimuli. Furthermore, the presence of low concentrated antibiotics induced also phenotypical change in the biofilm architecture observed by 3D-imaging.

The tissue and organs (muscle, brain, liver, and gill) of four species of freshwater fish from Lake Baiyangdian were analyzed for hexachlorocyclohexanes (HCHs) and dichloro-diphenyl-trichloroethanes (DDTs). The distribution characteristics were analyzed for HCHs and DDTs in various tissue and organs, which determined the health risks for humans. The research results showed that the wet weight content of all HCHs (∑HCHs) ranged from 0.05 ∼ 14.53 ng g(-1), with a mean of 3.47 ng g(-1). The wet weight content of all DDTs (∑DDTs) ranged from ND to 8.51 ng g(-1), with a mean of 2.41 ng g(-1). For the various species of fish, the residual level of ∑HCHs was relatively higher in chub and grass carp and lowest in snakehead. The residual level of ∑DDTs was the highest in snakehead and did not exhibit a significant variance in the other three species. For the various tissues and organs, the contents of HCHs and DDTs were both highest in the fish liver, second highest in the fish gill, and lowest in the fish brain and muscle. Among the four types of isomers, the residual level of γ-HCH was relatively higher, while the residual level of α-HCH was the lowest. The content of p,p'-DDE was significantly greater to other forms of DDT and its isomer. The residual levels of HCHs and DDTs in fish were both below the national standard. However, the carcinogenic risk from the HCHs in parts of the tissue and organs of four fish species in Lake Baiyangdian exceeded the screen value threshold set by USEPA.

Hydroponic experiments were performed with Talinum triangulare (Jacq.) Willd. focusing the root cellular biochemistry with special emphasis on DNA damage, structural, and elemental analyses in Pb(NO₃)₂exposed with 0, 0.25, 0.5, 0.75, 1.0, and 1.25 mM for 7 days. Lead (Pb) increased reactive oxygen species production, lipid peroxidation, protein oxidation, cell death, and DNA damage and decreased the protein content in a dose-dependent manner. Likewise, a dose-dependent induction of antioxidative enzymes superoxide dismutase and catalase by Pb was evident. Ascorbate peroxidase on the other hand responded biphasically to Pb treatments by showing induction at low (0.25 and 0.50) and repression at high (0.75–1.25 mM) concentrations. The estimation of proline content also indicated a similar biphasic trend. Scanning electron microscope and energy-dispersive X-ray spectroscopy analysis showed that 1.25 mM Pb treatment resulted in ultrastructural modifications in roots and stem tissue that was marked by the change in the elemental profile. The findings pointed to the role of oxidative stress in the underlying Pb phytotoxicity and genotoxicity in T. triangulare.

A long-term study was conducted to evaluate Piracicaba River water (So Paulo state, Brazil) using different methodologies and organisms. During 1 year (February 2011 to January 2012), water samples were collected monthly at six different locations and exposed under laboratory conditions to the microcrustaceans Ceriodaphnia dubia and Ceriodaphnia silvestrii for 7 days and to the fish Danio rerio for 4 days to evaluate effects on reproduction and on gill morphology, respectively. Physical-chemical parameters of the water were also measured. Physical-chemical characteristics demonstrated decreasing water quality from upstream to downstream of the river. Effects on the reproduction of C. dubia and C. silvestrii were observed in 3 months (February and March 2011 and January 2012) and occurred in samples collected close to industrialized cities like Americana and Piracicaba. Evaluation of the gills showed normal function of the organ during all months, except in February, September, and October for some locations.

INTRODUCTION: The removal of heavy metals by natural adsorbent has become one of the most attractive solutions for environmental remediation. Natural clay collected from the Late Cretaceous Aleg formation, Tunisia was used as a natural adsorbent for the removal of Hg(II) in aqueous system. METHODS: Physicochemical characterization of the adsorbent was carried out with the aid of various techniques, including chemical analysis, X-ray diffraction, Fourier transform infrared and scanning electron micrograph. Batch sorption technique was selected as an appropriate technique in the current study. Method parameters, including pH, temperature, initial metal concentration and contact time, were varied in order to quantitatively evaluate their effects on Hg(II) adsorption onto the original and pillared clay samples. Adsorption kinetic was studied by fitting the experimental results to the pseudo-first-order and pseudo-second-order kinetic models. The adsorption data were also simulated with Langmuir, Freundlich and Temkin isotherms. RESULTS: Results showed that the natural clay samples are mainly composed of silica, alumina, iron, calcium and magnesium oxides. The sorbents are mainly mesoporous materials with specific surface area of <250 m² g⁻¹. From the adsorption of Hg(II) studies, experimental data demonstrated a high degree of fitness to the pseudo-second-order kinetics with an equilibration time of 240 min. The equilibrium data showed the best model fit to Langmuir model with the maximum adsorption capacities of 9.70 and 49.75 mg g⁻¹ for the original and aluminium pillared clays, respectively. The maximum adsorption of Hg(II) on the aluminium pillared clay was observed to occur at pH 3.2. The calculated thermodynamic parameters (∆G°, ∆H° and ∆S°) showed an exothermic adsorption process. The entropy values varied between 60.77 and 117.59 J mol⁻¹ K⁻¹, and those of enthalpy ranged from 16.31 to 30.77 kJ mol⁻¹. The equilibrium parameter (R L) indicated that the adsorption of Hg(II) on Tunisian smectitic clays was favourable under the experimental conditions of this study. CONCLUSION: The clay of the Aleg formation, Tunisia was found to be an efficient adsorbent for Hg(II) removal in aqueous systems.

Yessotoxins (YTXs) are polycyclic ether compounds produced by phytoplanktonic dinoflagellates and accumulated in filter-feeding shellfish. Mouse bioassay is still the official method to detect these toxins, even if it is lacking of specificity and sensitivity. Moreover, there is growing resistance against the use of animal experiments. Many efforts have been made to determine YTXs with other methods. The detection of YTX using a functional assay allows its quantification with an automated and repetitive technique at concentrations in the range of the 1 mg of YTX equivalent/kg European regulatory limit. In this study, an in vitro functional assay based on YTX treatment of MCF-7 cells and resulting in the accumulation of a 100-kDa fragment of E-cadherin was developed on samples of Mytilus galloprovincialis collected from the Adriatic Sea, Italy, along the coasts of Abruzzo, Molise, and Emilia Romagna regions. The YTX concentrations ranged from 0.2 to 1.8 mg of YTX equivalent/kg. The occurrence of levels exceeding the above mentioned limit was observed only in samples of Emilia Romagna region. This last result could represent a risk for human health, but these shellfish were not intended to consumers, because they belonged to a preventive monitoring program.

Olive oil mill wastewater (OMWW), a recalcitrant pollutant, has features including high phenolic content and dark color; thereby, several chemical or physical treatments or biological processes were not able to remediate it. In this study, the treatment efficiencies of three treatments, including adsorption, biological application, and photo-Fenton oxidation were sequentially evaluated for OMWW. Adsorption, biological treatment, and photo-Fenton caused decreasing phenolic contents of 48.69 %, 59.40 %, and 95 %, respectively. However, after three sequential treatments were performed, higher reduction percentages in phenolic (total 99 %) and organic contents (90 %) were observed. Although the studied fungus has not induced significant color reduction, photo-Fenton oxidation was considered to be an attractive solution, especially for color reduction. Besides, toxicity of OMWW treatment was significantly reduced.

The purpose of this research is to use a simple method to prepare magnetic modified biomass with good adsorption performances for cationic ions. The magnetic modified biomass was prepared by two steps: (1) preparation of pyromellitic dianhydride (PMDA) modified biomass in N, N-dimethylacetamide solution and (2) preparation of magnetic PMDA modified biomass by a situ co-precipitation method under the assistance of ultrasound irradiation in ammonia water. The adsorption potential of the as-prepared magnetic modified biomass was analyzed by using cationic dyes: methylene blue and basic magenta as model dyes. Optical micrograph and x-ray diffraction analyses showed that Fe₃O₄ particles were precipitated on the modified biomass surface. The as-prepared biosorbent could be recycled easily by using an applied magnetic field. Titration analysis showed that the total concentration of the functional groups on the magnetic PMDA modified biomass was calculated to be 0.75 mmol g⁻¹ by using the first derivative method. The adsorption capacities (q ₘ) of the magnetic PMDA modified biomass for methylene blue and basic magenta were 609.0 and 520.9 mg g⁻¹, respectively, according to the Langmuir equation. Kinetics experiment showed that adsorption could be completed within 150 min for both dyes. The desorption experiment showed that the magnetic sorbent could be used repeatedly after regeneration. The as-prepared magnetic modified sorbent had a potential in the dyeing industry wastewater treatment.