The present study was conducted to maximize the biosorption of dye by utilizing the native (untreated) pellets of Aspergillus lentulus. The native (55.0 mg/g) and heat-treated (56.7 mg/g) pellets showed excellent dye biosorption capacity which declined upon alginate immobilization (27.2 mg/g). Fourier transform infrared and EDX spectra revealed that phosphate and –CH₃groups are important in determining the biosorption capacity of the pretreated fungal biomass. The operating conditions of the aerated fed batch reactor were optimized and 90 % removal of Acid Blue 120 in 12 h was achieved after five biosorption–desorption cycles. At the end of the fifth cycle, 508.57 mg/L dye could be removed in 60 h with the removal rate of 8.48 mg/L/h. Further, the potential utilization of fungal biomass for the treatment of complex effluent was validated by studying the dye removal from unprocessed textile effluent wherein 58.0 % dye was removed within 4 h of contact.

Aluminium is used in diverse anthropogenic processes at the origin of pollution events in aquatic ecosystems. In the Champagne region (France), high concentrations of aluminium (Al) are detected due to vine-growing practices. In fish, little is known about the possible immune-related effects at relevant environmental concentrations. The present study analyzes the simultaneous effects of aluminium and bacterial lipopolysaccharide (LPS), alone and in combination, on toxicological biomarkers in the freshwater fish species Rutilus rutilus. For this purpose, roach treated or not with LPS were exposed to environmental concentrations of aluminium (100 μg/L) under laboratory-controlled conditions for 2, 7, 14 and 21 days. After each exposure time, we assessed hepatic lipoperoxidation, catalase activity, glutathione reductase activity and total glutathione content. We also analyzed cellular components related to the LPS-induced inflammatory response in possible target tissues, i.e. head kidney and spleen. Our results revealed a significant prooxidant effect in the liver cells and head kidney leukocytes of roach exposed to 100 μg of Al/L for 2 days. In liver, we observed more lipoperoxidation products and lower endogenous antioxidant activity levels such as glutathione reductase activity and total glutathione content. These prooxidant effects were associated with a higher oxidative burst in head kidney leukocytes, and they were all the more important in fish stimulated by LPS injection. These findings demonstrate that environmental concentrations of Al induce oxidative and immunotoxic effects in fish and are associated to an immunomodulatory process related to the inflammatory response.

Natural resource habitats, which are isolated from the surface water bodies, are often unregulated and face a higher risk of degradation. Vernal pools, habitats for amphibians, are vulnerable to external stressors that often lead to decline in biodiversity. There is a need to protect these through conservation measures at a spatially targeted level. This study is conducted in the Middle Connecticut River Watershed of Massachusetts State. We evaluate the risk faced by isolated vernal pools at the subwatershed scale. The assessment involves the impact of agricultural intensity and vernal pool distribution in proximity to agriculture parcels. This is performed using geoprocessing techniques within a geographic information system (GIS). The spatial data are used in a nonlinear regression model to evaluate potential stressors to vernal pool existence. The model included land use, geographic features, and hydrographic factors. Agriculture and open land positively influence vernal pool existence, because of vernal pool association with low-lying areas. In addition, elevation showed a negative influence on the number of vernal pool habitats. The results of the spatial risk evaluation of habitat are helpful to target efforts on specific subwatersheds in conserving vernal pool habitats.

A novel mesoporous, nanocomposite, magnetically separable adsorbent, namely activated alumina (γ-Al₂O₃)/ferrite (Ni₀.₅Zn₀.₅Fe₂O₄) microfibers have been successfully prepared by the sol–gel process. These nanocomposite γ-Al₂O₃/Ni₀.₅Zn₀.₅Fe₂O₄microfibers are formed after calcination of the precursor at 450 °C for 3 h, and characterized with high aspect ratios and uniform diameters of 1–10 μm. In the nanocomposite γ-Al₂O₃/Ni₀.₅Zn₀.₅Fe₂O₄microfibers, the spherical γ-Al₂O₃particles are homogeneously embedded on the microfiber. Their specific surface areas and magnetic properties are significantly influenced by the γ-Al₂O₃content and calcination conditions. With the designed γ-Al₂O₃mass fraction of 0.2 and the calcination temperature of 550 °C, the γ-Al₂O₃/Ni₀.₅Zn₀.₅Fe₂O₄microfibers possess a high specific surface area of 118.3 m²/g and saturation magnetization (Mₛ) of 20.4 Am² kg⁻¹, respectively. The adsorption behaviors of the nanocomposite γ-Al₂O₃/Ni₀.₅Zn₀.₅Fe₂O₄microfibers were examined using the Congo red and methyl blue dyes as the adsorbate. The adsorption kinetics, effects of the adsorbent dosage and solution pH, adsorption isotherms, and regeneration of the microfiber adsorbents were investigated. The pseudo-second-order model can be used to describe the adsorption kinetics. The resultant isotherm data are well fitted by the Temkin model, implying that the dyes adsorption on the γ-Al₂O₃/Ni₀.₅Zn₀.₅Fe₂O₄microfibers is a multilayer adsorption combined with some degrees of chemical interactions. Considering the simple synthesis process, high adsorption and unique magnetic property, these mesoporous, magnetic, nanocomposite γ-Al₂O₃/Ni₀.₅Zn₀.₅Fe₂O₄microfibers can be used as a highly efficient, fast, and convenient adsorbent for dyes removal.Highlights The magnetic mesoporous Al₂O₃/Ni₀.₅Zn₀.₅Fe₂O₄microfibers were synthesized. Adsorption kinetics and adsorption isotherms were investigated. The separation, regeneration, and adsorption efficiency were enhanced.

Heavy metals are determinant factors in increasing environmental pollution, and chromium is considered to be of highest concern because of its genotoxicity in microorganisms, animals, and humans. Relatively few studies are focused on the injury induced in plant genetic material. Therefore, the main objective of this work was to evaluate the extent of the cytogenetic damage induced in root meristems of barley (Hordeum vulgare L.) after short-term seed exposure to 10, 100, 250, and 500 μM K₂Cr₂O₇(Cr(VI) concentration is 1.04, 10.39, 25.99, and 51.99 μg ml⁻¹) and 10, 100, 250, and 500 μM CrCl₃(Cr(III) concentration is 0.52, 5.19, 12.99, and 25.99 μg ml⁻¹). Chromium genotoxic potential was proved by significant increases in the rates of the ana-telophase chromosomal aberrations (1.3–2.3 times higher for K₂Cr₂O₇and 1.7–2.2 times higher for CrCl₃, as compared to the control; p < 0.05, p < 0.01) and of metaphase disturbances (5.0–7.5 times more numerous in chromium-treated groups than in control; p < 0.001). The pattern of the chromosomal aberrations is constituted by chromatid bridges, complex aberrations, lagging, and vagrant chromosomes, while the abnormal metaphases are c-like metaphases, sticky metaphases, and metaphases with chromosomes expulsed from equatorial plate. The mitotic indices and the growth of the barley plantlets in the early ontogeny were stimulated by chromium. The changes induced in the frequency of division stages mainly consisted in prophase and telophase accumulation and diminution of metaphase and anaphase proportion.

A simple strategy and method is presented to monitor NO₂ health standards in busy streets of middle large South East Asian cities.

The aim of this study is to develop a new method for the preconcentration of copper via a dispersive liquid–liquid microextraction method using 4-phenyl-3-thiosemicarbazide as a ligand and determination with FAAS in different sample types such as plants, soils and natural waters such as seawater. Optimum experimental conditions were determined, and the applicability of the proposed dispersive liquid–liquid microextraction method was investigated. In the first step of the work, the parameters that affect complex formation and extraction, such as volume of extractant/disperser solvent, pH and concentration of the chelating agent, NaCl and surfactant, were optimised. The interference effects from potential concomitants on the determination of the Cu(II) ion were investigated in synthetic mixtures that contain high levels of these ions. These results showed the analytical applicability of the proposed method in different kinds of samples. Under the optimal conditions, the calibration curve was linear over the range 2–600 μg L⁻¹of copper, and the detection limit was 0.69 μg L⁻¹in the original solution (3 Sb/m). The accuracy of the developed method was checked by analysing certified reference materials (QCS-19 (high purity standard), LGC 6156 (harbour sediment) and NBS 1572 (citrus leaves)). Results obtained were in agreement with certified values with a t test showing that no significant differences at the 95 % confidence interval levels were found. The proposed method was applied to seawater, river water, and plant and soil samples. The recovery values for spiked water samples were between 99.7 and 117.3 %.

Phosphorus (P) management in agriculture is crucial for both environmental health and future availability of P resource. Application of P as fertilisers (organic or inorganic) often results in either P accumulation in soil or loss to water bodies, rendering them unavailable to crops. In this study, the mobility of inorganic (KH₂PO₄(PP)) and organic (poultry manure (PM)) P sources, as affected by coal combustion products (CCPs: fly ash (FA) and fluidised bed combustion ash (FBC)) application to soils, was evaluated using column leaching experiments. The incubated samples were also characterised using X-ray diffraction (XRD) and scanning electron microscopy (SEM) to understand their surface properties in relation to P adsorption and leaching. The results showed differential effects of CCPs to P treatments—in the case of PP, the CCPs decreased P leaching by 12.11 % (FA) and 20.56 % (FBC), whereas in the case of PM treatment, both CCPs increased P in leachates by 35.53 % (FA) and 18.44 % (FBC). The decrease in P leaching for PP-treated soil as affected by CCPs was attributed to high pH and Ca concentration. There was a negative relationship between the increase in CCP-induced pH and P leaching demonstrating that pH plays a crucial role in P immobilisation, transformation and leaching. The increase in P leaching for CCP-incubated–PM-treated soils was because of the mineralisation of organic P from PM. The surface chemistry from XRD and SEM results showed an increased surface area for CCPs-incubated soil compared to the control and also showed the presence of Ca-rich minerals in CCPs such as ettringite, wollastonite and merwinite.

The novel adsorbent Cu-impregnated activated coke (CAC) has been successfully prepared using a Cu(NO₃)₂solution impregnated activated coke (AC). The optimum preparation conditions of CAC are the concentration of Cu(NO₃)₂of 0.1 mol/L, pH of 6, loading time of 4 h, and loading temperature of 333 K. The characterizations of CAC are analyzed by N₂adsorption, X-ray diffraction, scanning electron microscope, and energy dispersive X-ray spectroscopy. Also the adsorption behavior of CAC to organic materials in TNT red water is studied. The adsorption data are simulated by Freundlich isotherm and Langmuir isotherm. Below 333 K Freundlich isotherm is more suitable, while Langmuir isotherm model is more fitted when the temperature is higher than 333 K. The adsorption kinetics follows a pseudo second-order model, and thermodynamic analysis indicates an endothermic and spontaneous adsorption processes, and the process appears to be controlled by the chemisorption process. Chemical oxygen demand of 85.34 % can be removed as CAC prepared under optimized conditions is used as absorbent. In summary, CAC has excellent absorption characteristics and can be used in the removal of organic materials from TNT red water.

In order to assess and accurately predict the self-purification capabilities of rivers with respect to enteric pollution, a thorough understanding of mechanisms such as dispersion, particle association, and inactivation in the water column is crucial. In this study, we firstly performed particle size distribution analyses of wastewater and investigated the Escherichia coli and enterococci loadings of each size fraction. It was seen that 91 % of E. coli and 83 % of enterococci were associated with particle sizes less than or equal to 12 μm. Particles larger than 63 μm contributed less than 1 % to overall E. coli and enterococci loadings. Based on these results, batch experiments were performed to investigate the effect of particle size and total suspended solids (TSS) concentration on UV inactivation of the two fecal indicator bacteria (FIB). A direct relationship between the particle size to which FIB were associated and their UV inactivation rate was noted. E. coli and enterococci associated with particles smaller than or equal to 12 μm were inactivated on average 2 × and 1.7 × faster than those associated with the larger particle fraction of 12 to 63 μm. It was additionally seen that as the TSS concentrations increased, the UV inactivation rates decreased. A tailing effect of UV inactivation was however noted at TSS concentrations above approximately 100 mg L⁻¹.