Currently little is known about the adsorption behaviors of metalloids on microplastics (MPs) and their complex toxic effects on aquatic plants. Herein, we investigated the adsorption behaviors of arsenic (As(III) and As(V)) on three types of MPs (polystyrene, polyvinyl chloride, and polyethylene) with four different particle sizes (100, 10, 1, and 0.1 μm). Compared with the short-term exposure experiment, co-toxicity of polystyrene nanoplastics (PS-NPs) and As on two submerged macrophytes (Vallisneria denseserrulata and Potamogeton crispus) were explored through two relatively longer 14-day-cultivation experiments in summer and spring, respectively. The adsorption results showed that As entered the internal surface adsorption site of MPs at 24 h and fully combined to reach equilibrium. The adsorption capacity also enhanced with the increase of MPs concentrations, which generated more adsorption sites for binding with MPs. The presence of PS-NPs increased the absorption of As on macrophytes by 36.2–47.2%. More serious damage of leaf structure by combined PS-NPs and As was observed by transmission electron microscope. The larger harms by the co-toxicity of MPs and As were also reflected by the changes in physiochemical characteristics (e.g. photosynthesis) and the enhancement of oxidative damage of macrophytes. This work provides a clear theoretical basis for the behavior of PS-NPs as carrier with other contaminants on submerged macrophytes, and clearly evaluates the co-toxicity of NPs and metalloids in complex aquatic environments.

Sewage sludges are rich in organic matter and several essential nutrients for plant growth, making them very appealing for application in agricultural soils. However, they may also contain a wide range of emerging pollutants, which has raised concerns about the potential risks of this practice to crops, the environment, and public health - accumulation in soils and/or plant uptake and translocation of contaminants. Therefore, there is a need to study plant-soil interactions and assess the uptake potential of these contaminants by food crops to better understand these risks. The main aim of this work was to assess the possible drawbacks of sludge application to cropland, by observing the impact on the growth and yield of a model crop (pea plant - Pisum sativum) grown over an 86-day greenhouse experiment and by assessing the uptake potential of synthetic musk fragrances. Different sewage sludge application rates (4–30-ton ha⁻¹) and initial concentrations of contaminants were tested. The application of sludge yielded benefits to the cultivated plants, finding improved crop productivity with an application rate of 30-ton ha⁻¹. At the end of the experiment, soil samples and plants separated into sections were analysed using a QuEChERS extraction methodology followed by gas chromatography-mass spectrometry (GC-MS) quantification. Galaxolide (HHCB) and tonalide (AHTN) underwent uptake by the plant roots, having been detected in concentrations up to 346 ng g⁻¹ on a dry weight basis (dw), but only HHCB was detected in above ground tissues. At the end, a decrease in the levels of synthetic musks in the amended soils (>80% in several instances) was observed. Assuming the worst-case scenario, no risk to human health was observed from the ingestion of peas grown on sewage sludge-amended soils. However, a soil hazard quotient analysis yielded worryingly high quotient values for AHTN in nearly all tested conditions.

Antibiotic resistance is a growing problem for ecosystem health and public healthcare. Hence, the transmission of antibiotic resistance from human and animal origins to natural environments requires careful investigation. In this study, nine antibiotic resistance genes (ARGs), three mobile genetic elements (MGEs), and their relations with antibiotics, heavy metals, and microbiota were investigated in 16 sample sites (Xinxiang, China). Fluoroquinolones (0.13–14.22 μg/L) were most abundant in hospital effluent and oxytetracycline (251.86–5817.47 μg/kg) in animal manure. Animal manure showed the highest levels of zinc (80.79–2597.14 mg/kg) and copper (32.47–85.22 mg/kg), possibly affecting the prevalence of intI1 and aac(6′)-Ib genes. Aminoglycoside and sulfonamide resistance genes (aac(6’)-Ib, aadA, and sul1) were the main ARGs in this area. In addition, the detected ARGs and MGEs were higher in animal manure than in hospital effluent, except for the sul1 gene. On the other hand, the incomplete removal of antibiotics (29.76–100%), heavy metals (31.25–100%), and ARGs (1–3 orders of magnitude) in MWWTPs resulted in the accumulation of these contaminants in the receiving river. Network analysis suggested that the potential hosts (Jeotgalibaca, Atopostipes, Corynebacterium_1, etc.) of ARGs were more predominant in animal manure rather than hospital effluent, indicating a higher ARG transfer potential in animal manure compared with hospital sources. These results provide useful insights into the different migration and dissemination routes of antibiotics, heavy metals, ARGs, and microbiota from anthropogenic and animal origins to their receiving environments via MWWTP discharge and manure fertilization.

Microplastics (MPs) present in non-negligible amounts in urban environments, where urban rivers serve as important transport channels for MPs. However, the footprint of MPs in urban rivers under the influence of natural and anthropogenic factors is poorly understood. This study investigated the MPs organization, stability and pollution risk before and after rainfall in the Qing River, Beijing. Rainfall potentially diluted the MPs abundance, attributed to opening of barrages and increase of flow velocity. The proportion of small-sized MPs (SMPs, 48–300 μm) decreased slightly, whereas that of normal-sized MPs (NMPs, 300–1000 μm) and large-sized MPs (LMPs, > 1000 μm) increased. However, SMPs dominantly presented in the Qing River before and after rainfall. Polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS) were main polymers observed in the Qing River. The proportions of PET and PS decreased, while PP and PE increased after rainfall. The main types of MPs introduced by stormwater were PP and PE. The elevated MP diversity integrated index after rain suggested that rainfall enriched the sources of MPs. Rainfall reduced the stability and fragmentation of MPs owing to the introduction of large debris. NMPs and LMPs were susceptible to further fragmentation and downsizing, implying that MPs abundance in the Qing River tended to rise and SMPs might enriched. In addition, alteration of MPs fragmentation and stability reflected that the likely input source was wastewater treatment plant and atmospheric deposition before rainfall, whereas soil and road dust were possible sources after rain. The pollution risk assessment defined the MPs pollution risk of Qing River as low level and decreased after rainfall. This study demonstrated that rainfall substantially influences MPs organization in urban river and provides empirical support for MPs environmental behavior under influence of natural and anthropogenic factors.

Unplanned urbanization and heavy automobile use by the rapidly growing population contribute to a variety of environmental issues. Roadside plants can mitigate air pollution by modifying their enzymatic activity, physiological and anatomical traits. Plant enzymes, physiological and anatomical traits play an important role in adaptation and mitigation mechanisms against vehicular emissions. There is a significant gap in understanding of how plant enzymes and anatomical traits respond or how they participate in modulating the effect of vehicular emissions/air pollution. Modulation of leaf anatomical traits is also useful in regulating plant physiological behavior. Hence, the present study was conducted to evaluate the effects of vehicular pollution on the enzymatic activity, physiological, and anatomical traits of plant species that grow in forests (S1) and alongside roads (S2-1 km away from the S1 site) during different seasons. The present study examines four commonly found roadside tree species i.e. Grevillea robusta, Cassia fistula, Quercus leucotrichophora and Cornus oblonga. The study found that the activities of catalase and phenylalanine ammonium enzymes were higher in G. robusta species of roadside than control site (S1). Non-enzymatic antioxidants such as flavonoid and phenol were also found in higher concentrations in roadside tree species during the summer season. However, the measured values of physiological traits were higher in Q. leucotrichophora tree species of S1 during the summer season. When compared to the other species along the roadside, Q. leucotrichophora had the highest number of stomata and epidermal cells during the summer season. Hence, we found that tree species grown along the roadside adapted towards vehicular emissions by modulating their enzymatic, physiological, and anatomical traits to mitigate the effect of air pollution.

Biodegradable plastic mulch film (BDM) is an environmentally friendly alternative to conventional polyethylene mulch, and has been growingly used in agriculture. However, practical degradation performance of BDM, especially the widely used type of blended polylactic acid (PLA)/polybutylene adipate (PBAT) in different ratios, and microbial alteration in soil environments, remain largely unrevealed. In this study, four types of BDM blended with 40–80% PLA and 20–60% PBAT were comparatively investigated through microcosm soil incubation experiments for 105 days, and combined with conditions of different soil moisture or pH. Microbiome within film-surrounding soil were assayed using 16 S rRNA high-throughput sequencing. Results showed a trend of increasing degradation efficiency with the increase of PLA proportion, and 70% PLA and 30% PBAT group presented the highest weight loss rate, i.e., 60.16 ± 5.86%. In addition, degradation and aging of PLA/PBAT varied among different soil moisture and pH values. A moderate moisture, i.e., 60% and a neutral pH7.0 caused significantly high degradation efficiency compared to other moisture or pH conditions. Moreover, bacterial abundance and community structure in the surrounding soil were related to soil moisture and pH. PLA/PBAT incubation treatment induced a remarkable increase in abundance of degradation-related species Pseudomonas and Sphingomonas. Bacterial richness and diversity in soil correspondingly respond to ratio-different PLA/PBAT's degradation under moisture/pH-different conditions through a redundancy analysis. Altogether, these findings indicate that practical degradation of PLA/PBAT film is closely related to soil environments and bacterial community. It is significant for the application of biodegradable plastics in agriculture on the perspective of soil sustainability.

This study investigated the effects of adding biochar (BC) on the fate of ciprofloxacin (CIP) and its related antibiotic tolerance (AT) in activated sludge. Three activated sludge reactors were established with different types of BC, derived from apple, pear, and mulberry tree, respectively, and one reactor with no BC. All reactors were exposed to an environmentally relevant level of CIP that acted as a definitive selective pressure significantly promoting AT to four representative antibiotics (CIP, ampicillin, tetracycline, and polymyxin B) by up to two orders of magnitude. While CIP removal was negligible in the reactor without BC, the BC-dosed reactors effectively removed CIP (70–95% removals) through primarily adsorption by BC and biodegradation/biosorption by biomass. The AT in the BC-added reactors was suppressed by 10–99%, compared to that without BC. The BC addition played a key role in sequestering CIP, thereby decreasing the selective pressure that enabled the proactive prevention of AT increase. 16S rRNA gene sequencing analysis showed that the BC addition alleviated the CIP-mediated toxicity to community diversity and organisms related to phosphorous removal. Machine learning modeling with random forest and support vector models using AS microbiome data collectively pinpointed Achromobacter selected by CIP and strongly associated with the AT increase in activated sludge. The identification of Achromobacter as an important AT bacteria revealed by the machine learning modeling with multiple models was also validated with a linear Pearson's correlation analysis. Overall, our study highlighted Achromobacter as a potential useful sentinel for monitoring AT occurring in the environment and suggested BC as a promising additive in wastewater treatment to improve micropollutant removal, mitigate potential AT propagation, and maintain community diversity against toxic antibiotic loadings.

Biochar (BC) application to agricultural soil can impact two nitrogen (N) gases pollutants, i.e., the ammonia (NH₃) and nitrous oxide (N₂O) losses to atmospheric environment. Under rice-wheat rotation, applied at which growth cycle may influence the aforementioned effects of BC. We conducted a soil column (35 cm in inner diameter and 70 cm in height) experiment to evaluate the responses of wheat N use efficiency (NUE), NH₃ volatilization, and N₂O emission from wheat season to biochar applied at rice (R) or wheat (W) growth cycle, meanwhile regarding the effect of inorganic fertilizer N input rate, i.e., 72, 90, and 108 kg ha⁻¹ (named N72, N90, and N108, respectively). The results showed that BC application influenced the wheat growth and grain yield. In particular, BC applied at rice season increased the wheat grain yield when receiving 90 and 108 kg N ha⁻¹. The improved wheat grain yield was attributed to that N90 + BC(R) and N108 + BC(R) enhanced the wheat NUE by 53.8% and 52.8% over N90 and N108, respectively. More N input led to higher NH₃ volatilization and its emission factor. Interestingly, 19.7%–34.0% lower NH₃ vitalizations were recorded under treatments with BC applied in rice season, compared with the treatments only with fertilizer N. BC applied at rice season exerted higher efficiency on mitigating N₂O emission than that applied at wheat season under three N input rates, i.e., 60.5%–77.6% vs 29.8%–34.8%. Overall, considering the crop yield and global warming potential resulting from NH₃ volatilization and N₂O emission of wheat season, N90 + BC(R) is recommended. In conclusion, farmers should consider the application time and reduce inorganic fertilizer N rate when using BC.

Significant concerns have been raised regarding to the pollution of antibiotics in recent years due to the abuse of antibiotics and their high detection rate in water. Herein, a novel super adsorbent, boronic acid-modified bacterial cellulose microspheres with a size of 415 μm in diameter was prepared through a facile water-in-oil emulsion method. The adsorbent was characterized by atomic force microscopy, scanning electron microscopy, and fourier transform infrared spectroscopy analyses to confirm its properties. The microspheres were applied as packing materials for the adsorption of tetracycline (TC) from an aqueous solution and hoggery sewer via the reversible covalent interaction between cis-diol groups in TC molecules and the boronic acid ligand. TC adsorption performance had been systemically investigated under various conditions, including the pH, temperature, TC concentration, contact time, and ionic strength. Results showed that the adsorption met pseudo-second-order, Elovich kinetic model and Sips, Redlich-Peterson isothermal models. And the adsorption process was spontaneous and endothermic, with the maximum TC adsorption capacity of 614.2 mg/g. After 18 adsorption-desorption cycles, the adsorption capacity remained as high as 84.5% compared with their original adsorption capacity. Compared with other reported adsorption materials, the microspheres had high adsorption capacity, a simple preparation process, and excellent recovery performance, demonstrating great potential in application on TC removal for water purification and providing new insights into the antibiotic's adsorption behavior of bacterial cellulose-based microspheres.

Photoaging is an important reaction for waste plastics in the aquatic environment and plays a key role in the lifetime of plastics. Nevertheless, when natural photosensitive substances such as nitrate participate in this process, the physiochemical changes in plastics and the corresponding reaction mechanisms are not well-understood. In this work, the photochemical behavior of polyethylene terephthalate (PET) bottles in deionized water and nitrate solution was systematically investigated under ultraviolet (UV) irradiation. The analyses of the surface physicochemical properties of the photoaged PET bottles indicated that, after 20 days of photo-irradiation, the presence of nitrate reduced the contact angle from 69.8 ± 0.9° to 60.0 ± 0.3°, and increased the O/C ratio from 0.23 to 0.32, respectively. The leaching rate of dissolved organic carbon (DOC), which was 0.0193 mg g⁻¹·day⁻¹ in nitrate solution, was twice that of 0.00941 mg g⁻¹·day⁻¹ in deionized water. Furthermore, fluorescence spectroscopy revealed that the increasing DOC had aromatic rings with hydroxyl on the side-chain formed after UV irradiation. The positive effect of nitrate on the degradation of PET bottles was mainly through the generation of hydroxyl radicals that were produced through the photolysis of nitrate. In addition, two-dimensional correlation spectroscopy analysis showed that the chain scission of PET plastics could be initiated by nitrate-induced ·OH attacking the carbon-oxygen bonds instead of forming peroxides with oxygen. This work elucidates the mechanism of photodegradation of plastics that was induced by nitrate and highlights the important role of natural photosensitive substances in the photoaging process of plastics.