It is critical to estimate the exposure to indoor air pollution of residents spending most of their time in such microenvironments. However, the understanding regarding PM2.5 exposure in residential indoor environments is very limited. In this study, we collected participants' basic information and time–activity patterns, as well as details of other factors related to indoor air pollution exposure, through questionnaires presented to a large population in 37 counties of China. Continuous monitoring of ambient PM2.5 concentrations was performed using an environmental fixed-site monitoring network. Residential indoor PM2.5 concentrations were predicted using a mass balance model based on the data obtained. Evaluation of continuous daily average residential indoor PM2.5 exposure doses for large populations during winter revealed concentrations ranged from 67 to 195 μg/m3. Finally, differences in residential indoor PM2.5 exposure between northern and southern China were investigated. The results suggested that residential indoor PM2.5 concentrations in northern China, associated with heating, were higher than in the south. The established model could be important for improved understanding of human exposure to indoor PM2.5 air pollution.

While (N-ethyl perfluorooctanesulfonamido ethanol)-based phosphates (SAmPAPs) have been proposed as a group of perfluorooctanesulfonate (PFOS) precursors, investigation of their occurrence and fate has been limited to SAmPAP diester. In this study, SAmPAP diester and triester were simultaneously determined in freshwater sediment from Taihu Lake using a newly developed UPLC-MS/MS method, and their biotransformation to PFOS in lake sediment was investigated. SAmPAP diester and triester were detected in sediments with a detection frequency of 56% and 88%, and their mean concentrations were 0.24 ± 0.11 ng/g dry weight (dw) and 0.12 ± 0.03 ng/g dw, respectively. The SAmPAP diester/triester ratio in sediment was 1.1 ± 4.2, much lower than that (6.7) observed in the technical product, and the positive correlation was found between the concentrations of SAmPAP diester and PFOS in sediments (r² = 0.45, p = 0.01), suggesting that SAmPAP diester would be biotransformed to PFOS in the lake sediment. The microbial degradation test in the lake sediments further clarified that SAmPAP diester was biodegraded to PFOS, but SAmPAP triester was highly recalcitrant to microbial degradation. This study suggests that the occurrence of SAmPAP diester in freshwater lake sediments may be an important precursor of PFOS.

We investigated how different carbonized materials, or chars (olive mill pomace biochar (BC) and urban greens pruning residues hydrochar (HC)) affect an important member of soil fauna, the terrestrial isopod Porcellio scaber. The selection behavior of isopods towards chars after a 48 h exposure was studied in (i) soil-char amended tests with single and multiple choices, and (ii) tests with chars offered as pure material. Finally, we exposed the isopods to char-amended soils for a period of 14 days to follow the effect on food consumption, body mass and activities of enzymes that are commonly altered upon stressor exposure (acetylcholinesterase, AChE, and glutathione S-transferase, GST). We showed that isopods are able to select between char amended and un-amended soil and different forms of char amendments: a clear preference for BC, and avoidance of HC were evidenced. The preferences remained the same when the chars were sterilized leading to the conclusion that initial microorganism composition was not the reason for selection, but selection was governed by other chars’ physico-chemical properties. It remains to be elucidated which of these properties were the dominant reason for the selection. We also showed that isopods intentionally use BC as food at a similar rate to alder leaves. Medium-term exposure to HC resulted in adverse effects on isopods because it led to reduced feeding and growth, in addition to increasing GST activity, although no alterations in AChE activity were found. We suggest that behavioral tests with P. scaber could be used as a fast, reliable and economically feasible screening method for determining the safety of chars for the soil environment. Results represent significant contribution in the field of char toxicity testing, highlighting the importance of tests with isopods as important members of soil meso fauna, with the aim of influencing environmental policies and quality standards.

Solid fuels, an important source of severe Household Air Pollution (HAP) linked to many adverse health outcomes, has been widely consumed around the world. China consumes large amounts of solid fuels and suffers from serious indoor and outdoor air pollution. Though global HAP issues had been reviewed in previous literatures, peer-reviewed Chinese publications were seldom included in those reviews. We conducted a literature review on the studies of HAP and personal exposure in rural China with inputs from peer-reviewed publications in both English and Chinese. A total of 36,572 articles were retrieved, 294 were read in full text, of which 92 were included in final data extraction and in-depth analysis. Although HAP is a very serious issue in China, studies on either HAP or personal exposure assessment were very limited. From existing studies, levels of air pollutants including carbon monoxide, sulfur dioxide, particulate matter (PM), organic carbon, elemental carbon, polycyclic aromatic hydrocarbons (PAHs), etc., in indoor and ambient air were analyzed for their temporal and spatial variations, and the differences across different fuel types were compared. The studies showed that PM and PAHs levels in most rural homes exceeded the World Health Organization (WHO) and Chinese National Standards, especially during the heating season in northern China. Replacing traditional fuels with cleaner ones (such as liquid petroleum gas (LPG), biogas or electricity) was considered as the most appropriate way to mitigate HAP. The daily exposure to PM and PAHs from using LPG, biogas or electricity was considerably lower than that from using traditional solid fuels. However, the level was still higher than the guideline values for PM and PAHs set by WHO to protect human health. To achieve a more effective control, the current data gap need to be closed and suggestions for future research were discussed in this review.

Poultry-emitted air pollutants, including particulate matter (PM) and ammonia, have raised concerns due to potential negative effects on human health and the environment. However, developing and optimizing remediation technologies requires a better understanding of air pollutant concentrations, the emission plumes, and the relationships between the pollutants. Therefore, we conducted ten field experiments to characterize PM (total suspended particulate [TSP], particulate matter less than 10 μm in aerodynamic diameter [PM10], and particulate matter less than 2.5 μm in aerodynamic diameter [PM2.5]) and ammonia emission-concentration profiles from a typical commercial poultry house. The emission factors of the poultry house, which were calculated using the concentrations and fan speed, were 0.66 (0.29–0.99) g NH3-N bird−1d−1 for ammonia, 52 (44–168) g d−1AU−1 (AU = animal unit = 500 kg) for TSP, 3.48 (1.16–9.03) g d−1AU−1 for PM10, and 0.07 (0.00–0.36) g d−1AU−1 for PM2.5. PM and ammonia emission concentrations decreased as distance from the fan increased. Although emission concentrations were similar in the daytime and nighttime, diurnal and nocturnal plume shapes were different due to the increased stability of the atmosphere at night. Particle size distribution analysis revealed that, at a given height, the percentage of PM10 and PM2.5 was consistent throughout the plume, indicating that the larger particles were not settling out of the airstream faster than the smaller particles. Overall, the direction of the measured air pollutant emission plumes was dominated by the tunnel fan ventilation airflow rate and direction instead of the ambient wind speed and direction. This is important because currently-available air dispersion models use ambient or modeled wind speed and direction as input parameters. Thus, results will be useful in evaluating dispersion models for ground-level, horizontally-released, point sources and in developing effective pollutant remediation strategies for emissions.

Plastic pollution is ubiquitous throughout the marine environment, with microplastic (i.e. <5 mm) contamination a global issue of emerging concern. The lack of universally accepted methods for quantifying microplastic contamination, including consistent application of microscopy, photography, an spectroscopy and photography, may result in unrealistic contamination estimates. Here, we present and apply an analysis workflow tailored to quantifying microplastic contamination in marine waters, incorporating stereomicroscopic visual sorting, microscopic photography and attenuated total reflectance (ATR) Fourier transform infrared (FTIR) spectroscopy. The workflow outlines step-by-step processing and associated decision making, thereby reducing bias in plastic identification and improving confidence in contamination estimates. Specific processing steps include (i) the use of a commercial algorithm-based comparison of particle spectra against an extensive commercially curated spectral library, followed by spectral interpretation to establish the chemical composition, (ii) a comparison against a customised contaminant spectral library to eliminate procedural contaminants, and (iii) final assignment of particles as either natural- or anthropogenic-derived materials, based on chemical type, a compare analysis of each particle against other particle spectra, and physical characteristics of particles. Applying this workflow to 54 tow samples collected in marine waters of North-Western Australia visually identified 248 potential anthropogenic particles. Subsequent ATR-FTIR spectroscopy, chemical assignment and visual re-inspection of photographs established 144 (58%) particles to be of anthropogenic origin. Of the original 248 particles, 97 (39%) were ultimately confirmed to be plastics, with 85 of these (34%) classified as microplastics, demonstrating that over 60% of particles may be misidentified as plastics if visual identification is not complemented by spectroscopy. Combined, this tailored analysis workflow outlines a consistent and sequential process to quantify contamination by microplastics and other anthropogenic microparticles in marine waters. Importantly, its application will contribute to more realistic estimates of microplastic contamination in marine waters, informing both ecological risk assessments and experimental concentrations in effect studies.

In this study, the molecular mechanisms involved in Ralstonia eutropha Q2-8-induced increased biomass and reduced cadmium (Cd) and arsenic (As) uptake in wheat plants (Triticum aestivum cv. Yangmai 16) were investigated in growth chambers. Strain Q2-8 significantly increased plant biomass (22–75%) without and with Cd (5 μM) + As (10 μM) stress and reduced plant above-ground tissue Cd (37%) and As (34%) contents compared to those in the controls. Strain Q2-8 significantly increased the proportions of Cd and As in wheat root cell walls. Under Cd and As stress, 109 root proteins were differentially expressed among which those involved in metabolisms, stress and defence, and energy were dominant in the presence of strain Q2-8. Furthermore, energy-, defence-, and cell wall biosynthesis-related proteins were found to be up-regulated. Notably, differentially expressed cell wall biosynthesis-related proteins in roots were only found in bacteria-inoculated plants under Cd and As stress. The results suggest that strain Q2-8 can alleviate Cd and As toxicity to wheat plant seedlings and reduce above-ground tissue Cd and As uptake by increasing the efficiency of root energy metabolism, defence, and cell wall biosynthesis under Cd and As stress.

Aluminum dialkyl phosphinates (ADPs) are a promising class of chemicals offering superior flame retardance. However, knowledge on their behavior in vivo is scarce. Hydrolysis has been suggested as one of the major routes of environmental degradation of ADPs. Herein, aluminum methylcyclohexyl phosphinic (AMHP), a kind of ADPs with industrial production in China, and its hydrolysate methyl cyclohexyl phosphinic acid (MHPA) were continuously exposed to Sprague Dawley (SD) rats for 28 days in this study. The same ratio of MHPA in organs to serum and the same daily excretion of MHPA were observed for AMHP exposure group and MHPA exposure group, suggesting the hydrolysis of AMHP in vivo. The hydrolysis of AMHP to MHPA was further confirmed by in vitro simulated human gastric intestinal juice. Therefore, both AMHP and MHPA distributed in liver, kidney and even brain in the form of MHPA. More than 80% of AMHP and MHPA could be excreted by feces and urine. Feces are the main route of excretion of AMHP and MHPA. The denseness of the inflammatory cell in the hepatic portal area and biochemical indexes showed the obvious dose-effect relationship. However, the toxicity of AMHP and MHPA was quite low even with exposure level up to 100 mg/kg dw/day. The low cumulative ability and mild toxicity indicated AMHP as a promising substitute for brominated flame retardant.

The effects of petroleum aromatic hydrocarbons (PAHs) on the embryonic and larval life stages of teleosts have been extensively examined. However, very little work has been conducted on how spilled oil affects fish sperm and there is no related knowledge concerning oil dispersing agents. The objective of our study was to determine sperm performance of a teleost fish under direct exposure to different concentrations of WAF (water accommodated fraction) and CEWAF (chemically enhanced water accommodated fraction). Capelin sperm motility, swimming behaviour, and sperm fertilization ability were evaluated in a scenario of an oil spill untreated (WAF) and treated (CEWAF) with the dispersant Corexit® EC9500A. Sperm fertilizing ability was lower when exposed to CEWAF concentrations of 16.1 × 103 μg/L total petroleum hydrocarbons and 47.9 μg/L PAH, and when exposed to the dispersant alone. The mechanism responsible for this reduced fertilizing ability is not clear. However, it is not related to the percentage of motile sperm or sperm swimming behaviour, as these were unaffected. WAF did not alter sperm swimming characteristics nor the fertilizing ability. We suggest the dispersant rather than the dispersed oil is responsible for the decrease in the sperm fertilizing ability and hypothesize that the surfactants present in the dispersant affect sperm membrane functionality.

A method was proposed to evaluate comprehensive effects of pHs and total metal concentration (TMC) variation for metal speciation human health risk in groundwater. The method used for the health assessment considered comprehensive and mutative effects caused by oral ingestion of groundwater based on human health risk assessment model and MINTEQ simulation. The results demonstrated that the dissolution rate of Ni2+ was affected by pH and Ni total concentration (total-Ni). With the increase of pH, the Ni2+ dissolved rate was smaller in the higher total-Ni at same pH. Ni2+ was dominant components contributed to health risk in groundwater. With the increase of pH in various total-Ni, HINi keep constant at first, and then decreased gradually. The HINi values of Ni speciation above acceptable level only in high total-Ni with alkaline conditions. The obtained results to verify that metals speciation were determined in health risk, and variation factors (pH and metal total concentration) played important role in risk estimation. These results provide basic information of heavy metal pollution control as well as remediation management.