It has been shown that the current approach to the assessment of contamination in the sediments obtained during the dredging works in the Baltic countries indicates the presence of "non-contaminated" dredged material. The concentration limits of heavy metals, Polycyclic Aromatic Hydrocarbons (PAHs), Polychlorinated Biphenyls (PCBs) have been exceeded only in 1% of the samples obtained during the dredging works (2005–2015) within the Polish coastal zone. After 2008, no contaminated sediments have been found. Also, in the remaining Baltic countries, sediments are very rarely contaminated. As a result of this assessment, the sediments can be stored in the sea or have a practical application. However, it has been questioned whether the large cost of determining the numerous chemical parameters is justified. It has been proposed to carry out simple screening tests. Following the preliminary screening, the decision on more detailed (and expensive) chemical tests of individual pollutants would be made.

Water and sediment quality, macrobenthos diversity and mercury levels were assessed in the Salado Estuary, Gulf of Guayaquil (Ecuador) during 2008, 2009 and 2014. Severe hypoxia, anoxia and large fluctuations of salinity occurred in an impacted sector within Guayaquil city relative to a mangrove area within the Salado Mangroves Faunal Production Reserve. Significant inter-site and temporal differences were observed for dissolved oxygen, salinity, total dissolved solids, percentage of silts and clays, and species diversity. Macrobenthos' species richness for both sectors was greater during 2008. Sediments revealed high concentrations of total mercury (THg) (1.20–2.76 mg kg−1 dw), exceeding Ecuador's SQG (0.1 mg kg−1 dw). Sediment THg were significantly lower in 2014 than 2008/09. Biota sediment sccumulation factor values for mussels (3.0 to 34), indicate high bioaccumulation potential from mercury-contaminated sediments. This work highlights the need to develop stronger environmental policies to protect the Salado Estuary from anthropogenic stressors.

The main objective with this study has been to study injection techniques for subsea dispersant injection (SSDI) to recommend techniques relevant for both laboratory studies and operational response equipment.The most significant factor was the injection point of the dispersant in relation to the release of the oil. The dispersant should be injected immediately before or after the oil is released. Then the dispersant will mix into the oil and reduce IFT before the oil enters the turbulent zone where initial droplet formation occurs.All injection techniques tested gave significant reductions in oil droplet sizes. However, due to the rapid oil droplet formation in turbulent jets and possible formation of surfactant aggregates in the oil, premixing of dispersants should not be used for experimental studies of subsea dispersant injection. This could underestimate dispersant effectiveness and produce results that might not be representative for up-scaled field conditions.

Dredged sediments have different physical and chemical characteristics compared with the sediments in place, which generates multiple effects on the environment.In this study, we show that the sampling strategy used to monitor the effects of dredge spoil deposition on the surrounding environment can lead to different interpretations. It appears that sediment sample replicates may or may not be necessary, depending on the studied area, the prevailing environmental forcings before sediment sampling and the combination of these two factors. The proposed modus operandi allows us to optimize both the confidence on the obtained results and the cost of the sediment studies (sampling and laboratory analyses). The results are based on the sediment fine fraction, which is considered as a key environmental component due, for example, to its strong association with the structure of benthic faunal communities as well as its role in the build-up of pollutants.

The aim of this study was to determine the levels of trace metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) in plastic pellets collected from two sandy beaches on the island of Vis, Croatia. A total of 92 pellets in a sediment volume of 3965 mL were collected at the investigated sampling sites. Concentrations of pellets in sediment samples ranged from 6 to 36 particles dm−3 of wet sediment. Mean particle weight of the collected beached pellets ranged from 17 mg to 31 mg. Trace metal concentrations in plastic pellets were greater than the concentrations reported for seawater in the investigated area, which indicates that plastic pellets sorb metals from the marine environment. The adsorbed trace metals may enter the food chain due to incidental ingestion of microplastic particles by marine animals, which presents a potential human health risk due to consumption of seafood.

The presence of toxic elements in fish represents a hazard for human health, especially in Mediterranean countries and other regions with high per-capita fish consumption. The present research, carried out along the northern Catalan coast (NW Mediterranean), aimed to determine the levels of trace metals and arsenic in the muscle of white seabream Diplodus sargus (L.), a common demersal species of growing interest for fisheries and aquaculture. Average mercury concentrations widely exceeded the limits imposed by EU despite the low contamination levels previously reported for the study area, stressing the potential risk associated to the consumption of medium-sized, non-predatory fishes. The other analyzed elements fell within the recommended limits. Preliminary results about the feeding habits of D. sargus are reported, in order to determine feeding habitat and items of the analyzed specimens.

A new mercury (Hg) evasion model for the Adriatic Sea was developed accounting for the ocean mixed layer depth in order to decrease Hg depletion at the surface. Previously modelled airborne Hg species and measured Hg in the ocean were used. Simulations were run using one- and two-way coupled atmosphere-ocean models. Discrepancies in evasion between the applied coupling schemes were shown to be insignificant. The model was evaluated by applying various wind parameterisations and diffusive coefficient formulae. Relatively high discrepancies among the applied methods were observed. The results of a shorter simulation were extrapolated over a one-year period by applying a measurement-based adaptation. We obtained good agreement with previously published data on Hg evasion in the entire Mediterranean area, thus confirming the suitability of the new model for Hg evasion simulations. Model computations performed for the Adriatic Sea resulted in levels of evasion approximately two times lower than previously estimated.

Mediterranean seagrasses have been hailed for their numerous ecosystem services, yet they are undergoing a decline in their coverage. The major complication with resolving this tendency is the sparsity of data on their overall distribution. This study addresses the suitability of the recently launched Sentinel-2 satellite for mapping the distribution of Mediterranean seagrass meadows. A comprehensive methodology is presented which applies atmospheric and analytical water column corrections and compares the performance of three different supervised classifiers. Remote sensing of the Thermaikos Gulf, northwestern Aegean Sea (Greece, eastern Mediterranean Sea) reveals that the utilization of Support Vector Machines on water column corrected reflectances yields best accuracies. Two Mediterranean seagrasses, Posidonia oceanica and Cymodocea nodosa, cover a total submerged area of 1.48km2 between depths of 1.4–16.5m. With its 10-m spatial resolution and 5-day revisit frequency, Sentinel-2 imagery can mitigate the Mediterranean seagrass distribution data gap and allow better management and conservation in the future in a retrospective, time- and cost-effective fashion.

The effects of dissolved oxygen and nutrient loading on the concentrations and species of phosphorus at the sediment–water interface were evaluated under laboratory conditions. The results showed that the redox potential was significantly correlated with the total phosphorus, total dissolved phosphorus, total nitrogen, ammonium and nitrate nitrogen levels in an aerobic setting, but no significant correlations were observed under anaerobic conditions. The dynamic equilibrium between the overlying water and sediment tended to balance out over time, and the concentration gradient reduced, when the nutrient loading was changed. The greatest variation was observed in the level of iron/aluminum-bound phosphorus, while the calcium-bound phosphorus and organic phosphorus contents showed relatively minor changes. This study not only illustrates the phosphorus transfer mechanism between sediment and water, but can also contribute to the management and protection of Bohai Bay.

We evaluated benthic bacterial communities as bioindicators in environmental impact assessments of salmon aquaculture, a rapidly growing sector of seafood industry. Sediment samples (n=72) were collected from below salmon cages towards distant reference sites. Bacterial community profiles inferred from DNA metabarcodes were compared to reference data from standard macrofauna biomonitoring surveys of the same samples. Deltaproteobacteria were predominant in immediate vicinity of the salmon cages. Along the transect, significant shifts in bacterial community structures were observed with Gammaproteobacteria dominating the less-impacted sites. Alpha- and beta-diversity measures of bacterial communities correlated significantly with macrofauna diversity metrics and with five ecological status indices. Benthic bacterial communities mirror the reaction of macrofauna bioindicators to environmental disturbances caused by salmon farming. The implementation of bacterial eDNA metabarcoding in future Strategic Framework Directives is an alternative cost-effective high-throughput biomonitoring solution, providing a basis for management strategies in a matter of days rather than months.