New agronomic and management approaches are urgently required to meet the challenges of improving resource use efficiency and crop yields in intensive agricultural systems. Here we report the fertilizer N use efficiency (FNUE), fate of fertilizer N and N budgets in newly designed cropping systems as compared with conventional winter wheat-summer maize double cropping (Con. W/M) in the North China Plain. A¹⁵N labelling approach was used to quantify FNUE by these new cropping systems which included optimized winter wheat-summer maize (Opt. W/M) with two harvests in one year; winter wheat/summer maize-spring maize (W/M-M) and winter wheat/summer soybean-spring maize (W/S-M) with three harvests in two years, and spring maize (M) with one harvest in one year. The results showed that only 18–20% of fertilizer N was recovered by crops in Con. W/M. Although Opt. W/M significantly increased FNUE to 33%–35% with increased crop yields, it consumed as much groundwater as Con. W/M. The W/M-M, W/S-M and M significantly increased FNUE to 27%–44% and reduced groundwater use and fertilizer N losses when compared to Con. W/M. The W/M-M achieved a comparable grain yield, but W/S-M and M had significantly lower grain yields when compared to Con. W/M. However, grain N harvest in W/S-M was comparable with Con. W/M due to higher grain N content in soybean. Post-anthesis fertilizer N uptake provided little contribution to total N uptake, and accounted for 5%, 12%, 7% and 2% of the average N uptake for winter wheat, spring maize, summer maize and summer soybean, respectively. When taking the second crop into account, Con. W/M recovered 27% of fertilizer N, while it increased to 36%–50% under the new cropping systems. We conclude that W/M-M and W/S-M will deliver significant improvements in the environmental footprints and sustainability of intensively managed cropping systems in the North China Plain.

Inhalation represents the most prevalent route of exposure with Thorium-232 compounds (Th-nitrate/Th-dioxide)/Th-containing dust in real occupational scenario. The present study investigated the mechanism of Th response in normal human alveolar epithelial cells (WI26), exposed to Th-nitrate or colloidal Th-dioxide (1–100 μg/ml, 24–72 h). Assessment in terms of changes in cell morphology, cell proliferation (cell count), plasma membrane integrity (lactate dehydrogenase leakage) and mitochondrial metabolic activity (MTT reduction) showed that Th-dioxide was quantitatively more deleterious than Th-nitrate to WI26 cells. TEM and immunofluorescence analysis suggested that Th-dioxide followed a clathrin/caveolin-mediated endocytosis, however, membrane perforation/non-endocytosis seemed to be the mode of Th internalization in cells exposed to Th-nitrate. Th-estimation by ICP-MS showed significantly higher uptake of Th in cells treated with Th-dioxide than with Th-nitrate at a given concentration. Both Th-dioxide and nitrate were found to increase the level of reactive oxygen species, which seemed to be responsible for lipid peroxidation, alteration in mitochondrial membrane potential and DNA-damage. Amongst HSPs, the protein levels of HSP70 and HSP90 were affected differentially by Th-nitrate/dioxide. Specific inhibitors of ATM (KU55933) or HSP90 (17AAG) were found to increase the Th- cytotoxicity suggesting prosurvival role of these signaling molecules in rescuing the cells from Th-toxicity.

It is vital for the development and application of heavy metal stabilization/solidification (S/S) agents to reveal the mechanism of the reaction between water-soluble thiourea formaldehyde (WTF) resin and heavy metal and evaluate its repairing effect. Based on the density functional theory analysis of the WTF resin structure, the mechanism analysis and scanning electron microscope (SEM) showed that the three-dimensional network structure with thiocarbonyl and hydroxyl groups is very conducive to the capture of Cd²⁺. The reduction rate of Cd²⁺ in soil added WTF resin could reach 70.6%–86.0%. The result of BCR’s sequential extraction also proved that the 86.4%–94.1% of Cd in the soil repaired by WTF resin changed from acid-soluble state to residue state. Enzyme activity analysis and 16sRNA sequencing experiments showed that such a structure does not harm soil health. The urease and phosphatase tests showed the nitrogen and phosphorus cycle of the soil added WTF resin was repaired. Even compared with the remediation agents Na₂S and hydroxyapatite, WTF resin still performed better in repairing soil health. These findings provide valuable insights into the efficient causes of WTF resin and its harmless effects on soil. The results obtained provide a critical reference for the future application of practical and gentle heavy metal S/S agents.

In this study, a novel biosorbent is prepared from the pods of Bauhinia variegata is used for defluoridation of the fluoride contaminated water. It is an eco-friendly and economically feasible material. Comparison of adsorption capacity of Physically Treated Bauhinia (PTB) and Chemically Treated Bauhinia (CTB) are carried in this work. Characterization studies like SEM, EDS, FTIR, and XRD are executed to analyze surface morphology and functional groups in PTB and CTB. The experimental procedure was implemented in a batch process where the operating constraints such as dosage, pH, initial fluoride concentration, time, and temperature are varied to attain optimized efficiency. PTB and CTB yield an adsorption capacities of 10.90 mg/g and 15.45 mg/g respectively in the batch process. PTB adheres fluoride in monolayer formation whereas CTB forms multilayer adsorption. The adsorption process was described by the Pseudo first-order model to state the mechanism of physisorption. The negative values of thermodynamic parameters indicate spontaneity and favorable conditions for adsorption process. As CTB has a higher adsorption capacity than PTB, the batch study has been extended to column adsorption. Bed depth, initial fluoride concentration, and flow rate are the experimental variables used to acquire breakthrough curves. Simplified column models like Adam-Bohart, Thomas, and Yoon-Nelson models were analyzed. In column studies, Yoon-Nelson model fitted well in describing the process of adsorption. The maximum adsorption capacity acquired during the column process was found to be 1.176 mg/g with a bed depth of 5 cm and a flow rate of 5 ml/min. Thus, the innocuous and sustainable adsorbent is developed and serves as an excellent defluoridation agent.

Urban Heat Island (UHI) is posing a significant challenge due to growing urbanisations across the world. Green infrastructure (GI) is popularly used for mitigating the impact of UHI, but knowledge on their optimal use is yet evolving. The UHI effect for large cities have received substantial attention previously. However, the corresponding effect is mostly unknown for towns, where appreciable parts of the population live, in Europe and elsewhere. Therefore, we analysed the possible impact of three vegetation types on UHI under numerous scenarios: baseline/current GI cover (BGI); hypothetical scenario without GI cover (HGI-No); three alternative hypothetical scenarios considering maximum green roofs (HGR-Max), grasslands (HG-Max) and trees (HT-Max) using a dispersion model ADMS-Temperature and Humidity model (ADMS-TH), taking a UK town (Guildford) as a case study area. Differences in an ambient temperature between three different landforms (central urban area, an urban park, and suburban residential area) were also explored. Under all scenarios, the night-time (0200 h; local time) showed a higher temperature increase, up to 1.315 °C due to the lowest atmospheric temperature. The highest average temperature perturbation (change in ambient temperature) was 0.563 °C under HGI-No scenario, followed by HG-Max (0.400 °C), BGI (0.343 °C), HGR-Max (0.326 °C) and HT-Max (0.277 °C). Furthermore, the central urban area experienced a 0.371 °C and 0.401 °C higher ambient temperature compared with its nearby suburban residential area and urban park, respectively. The results allow to conclude that temperature perturbations in urban environments are highly dependent on the type of GI, anthropogenic heat sources (buildings and vehicles) and the percentage of land covered by GI. Among all other forms of GI, trees were the best-suited GI which can play a viable role in reducing the UHI. Green roofs can act as an additional mitigation measure for the reduction of UHI at city scale if large areas are covered.

The relationship between heavy metal(loid)s exposure and oxidative stress damage is a matter of research interest. Our study aimed to investigate the distribution patterns of the nine heavy metal(loid)s in blood of pregnant women, including four toxic heavy metal(loid)s [arsenic (As), cadmium (Cd), lead (Pb) and mercury (Hg)] and five typical heavy metal(loid)s [manganese (Mn), cobalt (Co), copper (Cu), zinc (Zn), and selenium (Se)] in blood. Blood samples of 348 women were collected and their concentrations in the serum (sr) and blood cells (bc) were measured, as well as serum heme oxygenase-1 (HO-1) (an oxidative stress marker). Total blood (tb) concentrations of these metal(loid)s and serum-to-blood cell concentration ratios (sr/bc) were further calculated. We found Cu mainly accumulated in the serum compared to the blood cells with Cuˢʳ/ᵇᶜ = 2.30, whereas Co, Se, and As evenly distributed between these two fractions. Other metal(loid)s mainly concentrated in the blood cells. Coˢʳ, Cuˢʳ, Cuᵇᶜ, Mnᵇᶜ, Znᵇᶜ, Cdᵇᶜ, Coᵗᵇ, Cuᵗᵇ, Mnᵗᵇ, Znᵗᵇ, Cdᵗᵇ, and Cuˢʳ/ᵇᶜ were negatively associated with serum HO-1, whereas Asˢʳ, Asᵇᶜ, Asᵗᵇ, Znˢʳ/ᵇᶜ, Cdˢʳ/ᵇᶜ, and Hgˢʳ/ᵇᶜ were positively, indicating of their potential toxicity. We concluded that the distribution patterns of blood heavy metal(loid)s, in particular for Cd, Hg and Zn, which either increased in serum or decreased in blood cells, might be associated with elevated serum oxidative stress, should be considered in environmental health assessments.

The mass, chemical composition and toxicological properties of fine particulates (PM₂.₅) emitted from cooking activities in three Hong Kong based restaurants and two simulated cooking experiments were characterized. Extracts from the PM₂.₅ samples elicited significant biological activities [cell viability, generation of reactive oxygen species (ROS), DNA damage and inflammation effect (TNF-α)] in a dose-dependent manner. The composition of PAHs, oxygenated PAHs (OPAHs) and azaarenes (AZAs) mixtures differed between samples. The concentration ranges of the Σ30PAHs, Σ17OPAHs and Σ4AZAs and Σ7Carbonyls in the samples were 9627–23,452 pg m⁻³, 503–3700 pg m⁻³, 33–263 pg m⁻³ and 158 – 5328 ng m⁻³, respectively. Cell viability caused by extracts from the samples was positively correlated to the concentration of benzo[a]anthracene, indeno[1,2,3-cd]pyrene and 1,4-naphthoquinone in the PM₂.₅ extracts. Cellular ROS production (upon exposure to extracts) was positively correlated with the concentrations of PM₂.₅, decaldehyde, acridine, Σ17OPAHs and 7 individual OPAHs. TNF-α showed significant positive correlations with the concentrations of most chemical species (elemental carbon, 16 individual PAHs including benzo[a]pyrene, Σ30PAHs, SO₄²⁻, Ca²⁺, Ca, Na, K, Ti, Cr, Mn, Fe, Cu and Zn). The concentrations of Al, Ti, Mn, Σ30PAHs and 8 individual PAHs including benzo[a]pyrene in the samples were positively correlated with DNA damage caused by extracts from the samples. This study demonstrates that inhalation of PM₂.₅ emitted from cooking could result in adverse human health effects.

Bacillus coagulans is regarded as a clean, safe and helpful probiotic additive in the production of livestock and poultry breeds. Some studies have also shown that Bacillus coagulans can adsorb heavy metals in water, even in the gut of animals. However, whether Bacillus coagulans feeding influences antibiotic resistance gene (ARG) abundance in the gut of lead-exposed laying hens is unknown. To better apply such probiotics in the breeding industry, the present study employed Bacillus coagulans R11 and laying hens in model experiments to test ARG changes in the cecum of laying hens under lead exposure and B. coagulans R11 feeding. The results showed that there was the trend for ARG abundance decreasing in feeding B. coagulans R11 without lead exposure to laying hens in the cecum; however, feeding B. coagulans R11 to laying hens exposed to lead obviously increased the abundances of aminoglycoside and chloramphenicol ARGs. Further experiment found that hydroquinone, dodecanedioic acid, gibberellin A14, alpha-solanine, jasmonic acid and chitin were involved in the abundances of ARGs in the cecum, in addition the abundances of these compounds were also significantly enhanced by lead exposure or combination effects of lead and B. coagulans R11. As a result, the ARG hazards increased with feeding B. coagulans R11 to laying hens exposed to lead, and the key compounds which influenced by the combination effects of lead and B. coagulans R11 might influence the ARGs abundance.

Cuttings are the main solid residues which are generated from drilling operations. Due to the presence of heavy and radioactive elements, the environment risk posed by cuttings has attracted increasing attention. In this work, a short-term static immersion experiment was carried out to investigate the leaching of polycyclic aromatic hydrocarbons (PAHs) from oil-based residues of shale gas drilling cuttings. Furthermore, the effects of some relevant environmental factors controlling the leaching behavior were evaluated, including the different particle sizes, pH, extraction time, solid-to-liquid (S/L) ratio and dissolved organic matter (DOM) concentration. The results showed that (1) the concentrations of leached PAHs gradually increased with prolonged leaching time, but the cumulative amount of PAHs released during leaching was less than 3% of the total. (2) The Elovich, parabolic diffusion and power function models were found to fit the experimental data better than the first-order kinetic equation, indicating that the leaching of PAHs was controlled by the coupling of diffusion and chemical reactions at the source surface. (3) Different environmental factors had different impacts on the leaching of PAHs: the shaking time and presence of DOM increased leachability, the particle size and S/L ratio decreased leachability, and the pH did not affect the leachability of PAHs. Therefore, PAHs leaching was a complex process, and it is of scientific and environmental interest to conduct the leaching tests under the simulated environmental conditions.

Widespread soil contamination threatens living standards and weakens global efforts towards the Sustainable Development Goals (SDGs). Detailed soil mapping is needed to guide effective countermeasures and sustainable remediation operations. Here, we review visible and infrared reflectance spectroscopy (VIRS) based detection methods in combination with machine learning. To date, proximal, airborne and spaceborne carrier devices have been employed for soil contamination detection, allowing large areas to be covered at low cost and with minimal secondary environmental impact. In this way, soil contaminants can be monitored remotely, either directly or through correlation with soil components (e.g. Fe-oxides, soil organic matter, clay minerals). Observed vegetation reflectance spectra has also been proven an effective indicator for mapping soil pollution. Calibration models based on machine learning are used to interpret spectral data and predict soil contamination levels. The algorithms used for this include partial least squares regression, neural networks, and random forest. The processes underlying each of these approaches are outlined in this review. Finally, current challenges and future research directions are explored and discussed.