Sexually mature male mosquitofish (Gambusia holbrooki) were collected from various sites around Melbourne in 2009 to evaluate the performance of gonopodial indices as a biomarker for endocrine disruption in Melbourne's waterways. The mosquitofish indices assessed were body length (BL), gonopodial length (GL)/BL ratio, ray 4:6 ratio and the absence or presence of hooks and serrae, and these varied between sites. The study was complemented by measurements of estrogenic, retinoid, thyroid and aryl hydrocarbon (AhR) receptor activities of the water. Male mosquitofish were 16.3–21.5 mm in length, and although there was a statistically significant positive relationship showing that bigger fish had longer gonopodia than small fish (r2 = 0.52, p < 0.001), there were few significant differences in GL/BL ratio of fish between sites. Measured estrogenic activity was mostly in the range 0.1–1.7 ng/L EEQ, with one site having much higher levels (~12 ng/L EEQ). Aryl hydrocarbon (AhR) receptor activity was observed in all water samples (7–180 ng/L βNF EQ), although there was no consistent pattern in the level of AhR activity observed, i.e., ‘clean’ sites were as likely to return a high AhR activity response as urban or wastewater treatment plant (WWTP)-impacted sites. There was no correlation between measurements of receptor actvity and gonopodial length (GL):BL ratio and BL. We conclude that the mosquitofish gonopodia only fulfills part of the criteria for biomarker selection for screening. The mosquitofish indices assessed were cheap and easy-to-perform procedures; however, there is no baseline data from the selected sites to evaluate whether differences in the morpholical indices observed at a site were a result of natural selection in the population or due to estrogenic exposure.

Standard species used in ecological risk assessment are chosen based on their sensitivity to various toxicants and the ease of rearing them for laboratory experiments. However, this mostly overlooks the fact that species in the field that may employ variable life-history strategies, which may have consequences concerning the vulnerability of such species to exposure with contaminants. We aimed to highlight the importance of copepods in ecology and to underline the need to include freshwater copepods in ecotoxicology. We carried out a literature search on copepods and Daphnia in ecology and ecotoxicology to compare the recognition given to these two taxa in these respective fields. We also conducted a detailed analysis of the literature on copepods and their current role in ecotoxicology to characterize the scale and depth of the studies and the ecotoxicological information therein. The literature on the ecology of copepods outweighed that in ecotoxicology when compared with daphnids. Copepods, like other zooplankton, were found to be sensitive to toxicants and important organisms in aquatic ecosystems. The few studies that were conducted on the ecotoxicology of copepods mainly focused on marine copepods. However, very little is known about the ecotoxicology of freshwater copepods. To enable a more realistic risk higher tier environmental risk assessment, we recommend considering freshwater copepods as part of the hazard assessment process. This could include the establishment of laboratory experiments to analyse the effects of toxicants on copepods and the development of individual-based models to extrapolate effects across species and scenarios.

Tailings deposits generated from mining activities represent a potential risk for the aquatic environment through the release of potentially toxic metals and metalloids occurring in a variety of minerals present in the tailings. Physicochemical and mineralogical characteristics of tailings such as total concentrations of chemical elements, pH, ratio of acid-producing to acid-neutralizing minerals, and primary and secondary mineral phases are very important factors that control the actual release of potentially toxic metals and metalloids from the tailings to the environment. The aims of this study are the determination of geochemical and mineralogical characteristics of tailings deposited in voluminous impoundment situated near the village of Markušovce (eastern Slovakia) and identification of the processes controlling the mobility of selected toxic metals (Cu, Hg) and metalloids (As, Sb). The studied tailings have unique features in comparison with the other tailings investigated previously because of the specific mineral assemblage primarily consisting of barite, siderite, quartz, and minor sulfides. To meet the aims, samples of the tailings were collected from 3 boreholes and 15 excavated pits and subjected to bulk geochemical analyses (i.e., determination of chemical composition, pH, Eh, acid generation, and neutralization potentials) combined with detailed mineralogical characterization using optical microscopy, X-ray diffraction (XRD), electron microprobe analysis (EMPA), and micro-X-ray diffraction (μ-XRD). Additionally, the geochemical and mineralogical factors controlling the transfer of potentially toxic elements from tailings to waters were also determined using short-term batch test (European norm EN 12457), sampling of drainage waters and speciation–equilibrium calculations performed with PHREEQC. The tailings mineral assemblage consists of siderite, barite, quartz, and dolomite. Sulfide minerals constitute only a minor proportion of the tailings mineral assemblage and their occurrence follows the order: chalcopyrite > pyrite > tetrahedrite > arsenopyrite. The mineralogical composition of the tailings corresponds well to the primary mineralization mined. The neutralization capacity of the tailings is high, as confirmed by the values of neutralization potential to acid generation potential ratio, ranging from 6.7 to 63.9, and neutral to slightly alkaline pH of the tailings (paste pH 7.16–8.12) and the waters (pH 7.00–8.52). This is explained by abundant occurrence of carbonate minerals in the tailings, which readily neutralize the acidity generated by sulfide oxidation. The total solid-phase concentrations of metal(loid)s decrease as Cu > Sb > Hg > As and reflect the proportions of sulfides present in the tailings. Sulfide oxidation generally extends to a depth of 2 m. μ-XRD and EMPA were used to study secondary products developed on the surface of sulfide minerals and within the tailings. The main secondary minerals identified are goethite and X-ray amorphous Fe oxyhydroxides and their occurrence decreases with increasing tailings depth. Secondary Fe phases are found as mineral coatings or individual grains and retain relatively high amounts of metal(loid)s (up to 57.6 wt% Cu, 1.60 wt% Hg, 23.8 wt% As, and 2.37 wt% Sb). Based on batch leaching tests and lysimeter results, the mobility of potentially toxic elements in the tailings is low. The limited mobility of metals and metalloids is due to their retention by Fe oxyhydroxides and low solubilities of metal(loid)-bearing sulfides. The observations are consistent with PHREEQC calculations, which predict the precipitation of Fe oxyhydroxides as the main solubility-controlling mineral phases for As, Cu, Hg, and Sb. Waters discharging from tailings impoundment are characterized by a neutral to slightly alkaline pH (7.52–7.96) and low concentrations of dissolved metal(loid)s (<5–7.0 μg/L Cu, <0.1–0.3 μg/L Hg, 5.0–16 μg/L As, and 5.0–43 μg/L Sb). Primary factors influencing aqueous chemistry at the site are mutual processes of sulfide oxidation and carbonate dissolution as well as precipitation reactions and sorption onto hydrous ferric oxides abundantly present at the discharge of the impoundment waters. The results of the study show that, presently, there are no threats of acid mine drainage formation at the site and significant contamination of natural aquatic ecosystem in the close vicinity of the tailings impoundment.

This study presents the degradation of phenol by the photoelectro-Fenton method using nano zero-valent iron (nZVI) immobilized in polyvinyl alcohol–alginate beads. The effect of nZVI loading, H₂O₂ concentration, pH, and initial phenol concentration on phenol degradation and chemical oxygen demand reduction was studied. The scanning electron microscope images of the nZVI beads were used to analyze their morphology, and their diameters were in the range of 500–600 μm. The concentration of nZVI in the beads was varied from 0.1 to 0.6 g/L. Fe²⁺ leakage of 1 and 3 % was observed with 0.5 and 0.6 g/L of nZVI, respectively, and the observed beads' fracture frequency was 2 %, which confirmed the stability of the beads. The optimum operating conditions that arrived for better degradation were 0.5 g/L of nZVI, pH 6.2, and 400 mg H₂O₂/L. The treatment of effluent by this method increased the biodegradability index of the effluent, and the degradation data were found to follow pseudo first-order kinetics.

Bulk atmospheric deposition measurements for selected persistent toxic substances (PTS) were performed along environment gradients (urban–suburban–rural–background sites) in Brazil. The aim with this work is to investigate the fate of PTS and their emissions in South America, particularly along environment transects. Bulk sampler systems (polyurethane foams, 1 × 1 m²) were fixed along environment gradients (urban–suburban–rural–background) over summer and winter periods (2005–2007) at sites of different climate zones of Brazil. Organochlorine pesticides (OCs) and polychlorinated biphenyls (PCBs) were analyzed by gas chromatography coupled to electron capture detector (Shimadzu 2010, 20i GC-ECD). Urban sites reported the highest deposition rates for all PTS, ranging from tens to thousands of pictograms per square meter per day. Basically, there were no obvious seasonal differences in deposition rate concentrations for PTS along the urban–suburban–rural–background gradient. Dichlorodiphenyltrichloroethane (DDT) and its metabolites were the OCs most frequently detected at relatively high deposition rate levels (>1,000 pg m⁻² day⁻¹). Other legacy and current-use pesticides such as hexachlorocyclohexanes, endosulfans, hexachlorcyclobenzine, dieldrin, aldrin, metoxichlor, and chlodanes were also detected at lower deposition rate levels (10–100 pg m⁻² day⁻¹). PCBs were detected at extremely high deposition rate levels (1,000–10,000 pg m⁻² day⁻¹) with highest contributions from the tetra-PCBs (PCB-52, PCB-44, PCB-66, PCB-81, and PCB-77) and penta-PCB congeners (PCB-101, PCB-105, PCB-114, PCB-118, and PCB-126). The greatest deposition rate concentrations for total PCBs were mainly detected at urban sites in connection with high population densities. The observed high deposition rate concentrations for PCBs and DDTs at urban sites are probably associated with old PTS stocks emissions. For PCBs in particular, the high levels are strongly associated with local population densities, highlighting the effect of local/regional urban sources on these target PTS. These results are important to show that even though the use of PTS is regulated, the deposition of selected PTS is still impacted by local and regional emissions in Brazil and may be related to the historical and continued emissions from old PTS stocks.

Short-term hydrodynamic fluctuations caused by extreme weather events are expected to increase worldwide because of global climate change, and such fluctuations can strongly influence cyanobacterial blooms. In this study, the cyanobacterial bloom disappearance and reappearance in Lake Taihu, China, in response to short-term hydrodynamic fluctuations, was investigated by field sampling, long-term ecological records, high-frequency sensors and MODIS satellite images. The horizontal drift caused by the dominant easterly wind during the phytoplankton growth season was mainly responsible for cyanobacterial biomass accumulation in the western and northern regions of the lake and subsequent bloom formation over relatively long time scales. The cyanobacterial bloom changed slowly under calm or gentle wind conditions. In contrast, the short-term bloom events within a day were mainly caused by entrainment and disentrainment of cyanobacterial colonies by wind-induced hydrodynamics. Observation of a westerly event in Lake Taihu revealed that when the 30 min mean wind speed (flow speed) exceeded the threshold value of 6 m/s (5.7 cm/s), cyanobacteria in colonies were entrained by the wind-induced hydrodynamics. Subsequently, the vertical migration of cyanobacterial colonies was controlled by hydrodynamics, resulting in thorough mixing of algal biomass throughout the water depth and the eventual disappearance of surface blooms. Moreover, the intense mixing can also increase the chance for forming larger and more cyanobacterial colonies, namely, aggregation. Subsequently, when the hydrodynamics became weak, the cyanobacterial colonies continuously float upward without effective buoyancy regulation, and cause cyanobacterial bloom explosive expansion after the westerly. Furthermore, the results of this study indicate that the strong wind happening frequently during April and October can be an important cause of the formation and expansion of cyanobacterial blooms in Lake Taihu.

Pharmaceutical compounds were increasingly detected in environmental matrices but little is known whether these compounds would transport to coastal zones via watersheds. Three typical tidal rivers in southeastern China were selected and 15 surface sediment samples (0-10 cm) were collected along a 50-km tidal section of each river. Surface sediment samples were frozen-drying and then extracted for pharmaceutical compounds by an accelerated solvent extraction system. The pharmaceutical compounds in extracts were scanned using a high-performance liquid chromatography/tandern mass spectrometry (HPLC-MS/MS). Three hundred and thirty compounds from nine pharmaceutical groups were detected with signal-to-noise above three (detectable level) in the surface sediments, of which 186 compounds were with a signal-to-noise above ten (measurable level). Of all, 291 and 80 compounds were detectable and measurable in all the three rivers, respectively. The Jiulong River showed a high load of pharmaceutical compounds in surface sediment than other two rivers. Of the nine pharmaceutical groups, the antihistamines and detoxification group and anti-infective drug group contributed five dominant compounds in the surface sediments in all the three rivers. Natures of pharmaceutical compounds rather than the sediment properties (pH, EC, and total carbon content) might influence their residues. The incredible number and intensity of pharmaceutical residues were detected in tidal surface sediments of the three rivers indicating that the pharmaceutical contamination should be strongly considered in China. Source identification and eco-toxicity assessment should be taken into account in the future study. Therapeutic medicine managements need to be strictly improved at a watershed scale to reduce loads of pharmaceuticals into aquatic ecosystems.

Pharmaceutical compounds are now considered as emerging contaminants of environmental concern. The overall objective of this study was to evaluate the uptake and translocation of clofibric acid (CA) by the macrophyte Scirpus validus growing hydroponically. A set of the three replicates was established for each exposure time and for each CA concentration. Plants were grown in 4 L vessels (four plants per vessel corresponding to the three exposure period studies, i.e., 7, 14, 18, and 21 days) which contained an aerated modified Hoagland nutrient solution that was spiked with CA at concentrations of 0.5, 1.0, and 2.0 mg L⁻¹. At each exposure period, CA concentration was measured in the nutrient solutions. A sea sand disruption method was employed for the extraction of CA from plant tissues. The determination of the pharmaceutical concentration was carried out using solid phase extraction (SPE) followed by chromatographic analysis. The quantification of CA concentrations in both nutrient solutions (after SPE) and plant tissues (after extraction) was conducted by chromatographic analysis. CA concentrations of 5.4–26.8 μg g⁻¹(fresh weight) were detected in the roots and 7.2–34.6 μg g⁻¹(fresh weight) in the shoots after 21 days. Mass balance calculations showed that S. validus uptake alone accounted for a significant contribution (6–13 % for the roots and 22–49 % for the shoots) of the total loss of CA. The bioaccumulation factors (BAFs) based on fresh weight for the roots ranged from 6.6 to 23.2, while values for the shoots ranged from 9.5 to 32.1. All the BAFs for the shoots were greater than those in the roots, implying that CA has greater tendency to be translocated to the shoots, rather than the roots of S. validus. All the shoot-to-root concentration ratios were more than 1, denoting that the shoots of S. validus do preferentially accumulate CA. We demonstrated that CA can be actively taken up, subsequently translocated and accumulated by aboveground tissues of S. validus. Since S. validus could account for the removal of 28–62 % of the total mass loss of CA from the system, such phytoremediation technology has great potential for the removal of pharmaceuticals such as CA from inflowing waters.

To develop a bacterial bioaugmentation system for fluorine-containing industrial wastewater treatment, optimal conditions for 4-fluoroaniline (4-FA) degradation and autoinducer release in Acinetobacter sp. TW were determined. Quorum sensing in biofilms of strain TW was also investigated. Different optimal conditions exist for 4-FA degradation and autoinducer release, particularly with regard to pH. Quorum sensing modulates extracellular polymeric substance (EPS) secretion and biofilm formation in the strain but plays no role in 4-FA degradation. Under optimal conditions for 4-FA degradation, the release of N-3-oxo-hexanoyl-homoserine lactone (3-oxo-C6-HSL) and N-hexanoyl-homoserine lactone (C6-HSL) in strain TW was significantly lower than required for quorum sensing. Under optimal conditions for autoinducer release, on the other hand, 3-oxo-C6-HSL and C6-HSL levels exceeded the quorum sensing thresholds, thereby inducing EPS secretion and biofilm formation. We conclude that the optimal conditions for autoinducer release (25 °C, pH 5, 800 mg L(-1) 4-FA, and 0 % NaCl) are suitable for bacterial colonization in bioaugmentation, while those for 4-FA degradation (25-30 °C, pH 8 and 800 mg L(-1) 4-FA) maximize the system performance after colonization.

Fluorescence in situ hybridisation (FISH) is a powerful molecular biological tool to detect and enumerate harmful microorganism in the marine environment. Different FISH methods are available, and especially in combination with automated counting techniques, the potential for a routine monitoring of harmful marine microalgae is attainable. Various oligonucleotide probes are developed for detecting harmful microalgae. However, FISH-based methods are not yet regularly included in monitoring programmes tracking the presence of harmful marine microalgae. A limitation factor of the FISH technique is the currently available number of suited fluorochromes attached to the FISH probes to detect various harmful species in one environmental sample at a time. However, coupled automated techniques, like flow cytometry or solid-phase cytometry, can facilitate the analysis of numerous field samples and help to overcome this drawback. A great benefit of FISH in contrast to other molecular biological detection methods for harmful marine microalgae is the direct visualisation of the hybridised target cells, which are not permitted in cell free formats, like DNA depending analysis methods. Therefore, an additional validation of the FISH-generated results is simultaneously given.