Polychlorinated naphthalenes (PCNs) have been proposed for inclusion in the annexes of the Stockholm Convention by the European Union, signifying a probable increase in monitoring PCN levels at a global level. Investigations on PCN levels in the environment of Hong Kong have not been reported. In this preliminary investigation, PCN levels in surface soils samples were determined by isotope dilution HRGC/HRMS techniques, and compared with those of polychlorinated biphenyl (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). The concentrations of PCNs in the soil samples were 35–883 pg g⁻¹(average, 201; and median, 94 pg g⁻¹), which were lower than those of PCBs PCDDs and PCDFs. This comparison suggested that PCNs are currently not priority POPs compared with dioxins and PCBs in Hong Kong soils. PCDDs were the most important contributor to the sum of toxic equivalents of PCNs, PCBs, PCDDs and PCDFs. OCDD was the most dominant dioxin congener in Hong Kong surface soils. PCB-118 was the most abundant in 12 dl-PCB congeners. PCN congeners indicating thermal related sources (CN52/60, CN66/67 and CN73) were relatively abundant in their respective homologs, which suggested PCN contamination from thermal sources. The ratio of CN73 to CN74 in soil samples suggested the contribution of PCN contaminations in soils from both thermal-related sources and evaporative emissions of technical PCN mixtures.

The diffusive gradients in thin films (DGT) were field deployed alongside the shrimp Litopenaeus vannamei at seven sites with different levels of contamination to assess the potentially bioavailable and toxic fraction of metal contaminants. After 7 days of exposure, several antioxidant biomarkers were quantified in hepatopancreas of exposed shrimps, and tissue levels as well as the total, dissolved, and DGT-labile concentrations of metal contaminants were determined in the pooled site samples. The results showed that the caged shrimps had high tissue contaminant concentrations and significantly inhibited antioxidant responses at the more contaminated sites. DGT-labile metal concentrations provided better spatial resolution of differences in metal contamination when compared with traditional bottle sampling and transplanted shrimp. The total, dissolved, and DGT-labile metal fractions were used to evaluate the potential bioavailability of metal contaminants, comparing with metal accumulation and further linking to antioxidant biomarker responses in tissues of exposed shrimps. Regression analysis showed the significant correlations between DGT-Cu concentrations and tissue-Cu and activities of some biomarker responses in the shrimp hepatopancreas. This indicated that DGT-labile Cu concentrations provided the better prediction of produced biological effects and of the bioavailability than the total or dissolved concentrations. The study supports the use of methods combining transplanted organisms and passive sampling for assessing the chemical and ecotoxicological status of aqueous environments and demonstrates the capability of the DGT technique as a powerful tool for measuring the bioavailability-based water quality in variable coastal environments.

The aim of the study was determination of air pollution impact of the copper smelter in Bor and its surroundings (Serbia) by assessing the suitability of birch (Betula pendula Roth.) and spruce (Picea abies L.) for the purposes of biomonitoring and comparing it with previously published data from the same study area. The concentrations of Cu, Zn, Pb and Mn in leaves/needles, branches, roots and soil were determined. Sampling was performed during 2009 in two zones with high load of air pollution due to copper mining and smelting activities, and one background zone. Metal accumulation and translocation was evaluated in terms of biological factors. In addition, plant enrichment factor was calculated. According to the results, plant foliage was not enriched through soil, which indicates absorption from the air, with both species acting as excluders of Cu, Pb, Zn and Mn. Leaves were more enriched with all the metals than needles, indicating a better response of birch to airborne pollution than spruce. Cluster analysis showed different level of pollution at the sites, while correlations between Cu and Pb obtained by Principal Component Analysis indicated their anthropogenic origin. Regarding previously published results, beside birch leaves, pine needles (which showed higher level of response to pollution compared to linden leaves) could be applied in air biomonitoring surveys near copper smelters.

The accumulation and fraction distribution of Ni(II) in sludge was determined, and their effect on the performance of sequencing batch reactor (SBR) systems was evaluated at laboratory scale. The results showed that the removal efficiencies of substrates decreased significantly with increasing feeding concentration of Ni(II) into SBRs. The concentration of Ni(II) fed into the SBRs was significantly positively correlated with the Ni(II) contents accumulated in the sludge, while it was negatively correlated with the biomass in the SBRs. The accumulated Ni(II) in the sludge was distributed mainly in the available fraction, accounting for 75.8–90.0 % of the total Ni(II) content. The accumulated content of Ni(II) in each sludge fraction could be predicted satisfactorily by the feeding Ni(II) concentrations in the solutions. As compared with the total contents and other chemical fractions, Ni(II) in the oxidizable fraction in sludge exhibited more important inhibition effects on sludge microorganisms in the SBRs.

The cyanobacterium Microcystis aeruginosa can potentially proliferate in a wide range of freshwater bionetworks and create extensive secondary metabolites which are harmful to human and animal health. The M. aeruginosa release toxic microcystins that can create a wide range of health-related issues to aquatic animals and humans. It is essential to eliminate them from the ecosystem with convenient method. It has been reported that engineered metal nanoparticles are potentially toxic to pathogenic organisms. In the present study, we examined the growth inhibition effect of green synthesized copper oxide nanoparticles against M. aeruginosa. The green synthesized copper oxide nanoparticles exhibit an excitation of surface plasmon resonance (SPR) at 270 nm confirmed using UV–visible spectrophotometer. The dynamic light scattering (DLS) analysis revealed that synthesized nanoparticles are colloidal in nature and having a particle size of 551 nm with high stability at −26.6 mV. The scanning electron microscopy (SEM) analysis shows that copper oxide nanoparticles are spherical, rod and irregular in shape, and consistently distributed throughout the solution. The elemental copper and oxide peak were confirmed using energy dispersive x-ray analysis (EDAX). Fourier-transform infrared (FT-IR) spectroscopy indicates the presence of functional groups which is mandatory for the reduction of copper ions. Besides, green synthesized copper oxide nanoparticles shows growth inhibition against M. aeruginosa. The inhibition efficiency was 31.8 % at lower concentration and 89.7 % at higher concentration of copper oxide nanoparticles, respectively. The chlorophyll (a and b) and carotenoid content of M. aeruginosa declined in dose-dependent manner with respect to induction of copper oxide nanoparticles. Furthermore, we analyzed the mechanism behind the cytotoxicity of M. aeruginosa induced by copper oxide nanoparticles through evaluating membrane integrity, reactive oxygen species (ROS), and mitochondrial membrane potential (Δψm) level. The results expose that there is a loss in membrane integrity with ROS formation that leads to alteration in the Δψm, which ends up with severe mitochondrial injury in copper oxide nanoparticles treated cells. Hence, green way synthesized copper oxide nanoparticles may be a useful selective biological agent for the control of M. aeruginosa.

Microorganisms play key roles in stream ecosystems, but comparatively little is known about the resilience of freshwater bacterial communities and their susceptibility to the chemical by-products of agricultural land use. Antibiotics used in the agricultural sector are of particular concern and have been detected in waterways associated with agricultural land. Despite widespread agricultural intensification globally and the sector's high antibiotic use, the effects of agricultural antibiotic by-products on stream microbial communities have yet to be characterised. We investigated the impacts of the antibiotic monensin on microbial biofilm communities in a simulated contamination event using streamside-replicated channels. A 24-h pulse experiment in flow channels precolonised by stream biofilm microbial communities contrasted the effects of monensin concentrations ranging from realistic to extreme toxicity levels (1–550 ug L⁻¹). Biofilm community composition was characterised immediately before and after the pulse for several weeks using automated ribosomal intergenic spacer analysis. Despite applying acutely toxic levels of monensin, only limited effects to biofilm community composition were detected immediately after antibiotic application, and these disappeared within 4 days. Rather, temporal factors drove biofilm differences, highlighting the overriding importance of wider, catchment-level, physiochemical hydrological influences on structuring freshwater biofilm communities, as opposed to localised and sporadic agricultural surface runoff contamination events containing antibiotics.

Battery tests serve as integral tools to decide whether a treatment process is ecotoxicologically safe or not. In the present study, a battery of toxicity tests was employed to elucidate the toxicity of the potential endocrine-disrupting pollutant bisphenol A (BPA) and its advanced oxidation products. For this purpose, BPA was subjected to Fenton treatment in the growth medium of the test organisms employed as well as in real lake water. Treatment results indicated that BPA removals were fast and complete within less than a minute, whereas total organic carbon (TOC) removals were rather incomplete, speaking for the accumulation of refractory degradation products. The presence of chloride and/or natural organic matter influenced H₂O₂ consumption rates and the treatment performance of the Fenton’s reagent as well. The sensitivity of the selected test organisms for BPA and its Fenton treatment products in different water matrices was found in the following decreasing order: the freshwater microalgae (Pseudokirchneriella subcapitata) > the freshwater cladoceran (Daphnia magna) > marine photobacteria (Vibrio fischeri).

Unintentionally produced persistent organic pollutants (UP-POPs) including polychlorinated dibenzo-p-dioxins, and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were characterized and quantified in stack gas and fly ash from the second ventilation systems in five typical converters in five different steelmaking plants. The 2378-substituted PCDD/Fs (2378-PCDD/Fs) and dioxin-like PCB (dl-PCBs) toxic equivalents (TEQs) were 1.84–10.3 pg WHO-TEQ Nm⁻³in the stack gas and 5.59–87.6 pg WHO-TEQ g⁻¹in the fly ash, and the PCN TEQs were 0.06–0.56 pg TEQ Nm⁻³in the stack gas and 0.03–0.08 pg TEQ g⁻¹in the fly ash. The concentrations of UP-POPs in the present study were generally lower than those in other metallurgical processes, such as electric arc furnaces, iron ore sintering, and secondary metallurgical processes. Adding scrap metal might increase UP-POP emissions, indicating that raw material composition was a key influence on emissions. HxCDF, HpCDF, OCDF, HpCDD, and OCDD were the dominant PCDD/Fs in the stack gas and fly ash. TeCB and PeCB were dominant in the stack gas, but HxCB provided more to the total PCB concentrations in the fly ash. The lower chlorinated PCNs were dominant in all of the samples. The 2378-PCDD/F, dl-PCB, and PCN emission factors in stack gases from the steelmaking converter processes (per ton of steel produced) were 1.88–2.89, 0.14–0.76,and 229–759 μg t⁻¹, respectively.