There is a growing concern over the use of antibiotics due to the increased resistance of pathogens in broiler. The present study was designed to find the comparative effect of an antibiotic, and some phytogenic on performance traits, blood biochemical parameters, and antioxidant status during starter phase exposed to Salmonella typhimurium challenge. A total of 560-day-old broiler chicks (Ross 308) were randomly allocated to seven treatments (eight replicates). Control (basal diet); T1, infected with Salmonella enterica subsp. typhimurium; T2, infected + avilamycin at the rate of 0.2 g/kg; T3, infected + essential oil of thymol; T4, infected + phytogenic; T5, infected + anti-Salmonella organic acid; and T6, infected + essential oils of thyme, anise, and other components. Body weight gain and feed conversion ratio (FCR) were significantly (P < 0.05) high in the T2 and T5 at the end of the first and the second week and similar to T4. During the second week, European production efficiency factor (EPEF) was also significantly (P < 0.05) high in T2, T4 and T5. Blood albumin increased significantly (P < 0.05) in birds of T2 in the first week, while during the second week, blood glucose and triglyceride concentration decreased significantly (P < 0.05) in T5. Blood ALT concentration decreased significantly (P < 0.05) in T6 compared to other treatments in the second week. Total antioxidant capacity (at the end of the second week) and thiobarbituric acid reactive substances (TBARS) did not change significantly. From the results of the present study, it was concluded that different feed additives could be substituted with antibiotics in the feed of broiler exposed to S. typhimurium challenge.

The application of a field portable X-ray fluorescence spectrometer (FPXRF) to measure Cu, Zn, and Pb in soil and sediments at recreational boatyards by Lake Mälaren in Sweden was investigated. Confirmatory chemical analysis on freeze-dried samples shows that, ex situ, the FPXRF produces definitive level data for Cu and Zn and quantitative screening data for Pb, according to USEPA criteria for data quality. Good agreement was also found between the ex situ measurements and the in situ screening. At each of the two studied boatyards, >40 in situ soil measurements were carried out. Statistical differences in soil concentration based on land use were consequently found: the areas used for boat storage and maintenance were significantly higher in Cu and Zn than the areas used for car parking and transportation. The metal pollution in the boat storage areas is therefore shown to be directly linked to hull maintenance activities during which metal-containing antifouling paint particles are shed, end up on the ground, and consequently pollute the soil. In the boat storage areas, the Cu and Zn concentrations often exceeded the national guideline values for soil. In this study, they were also shown to increase with increasing age of the boatyard operation. Pb soil concentrations were only elevated at a few measurement points, reflecting the phasing out of Pb compounds from antifouling products over the past 2 decades. In the surface sediments, concentrations of Cu and Zn were 2–3 times higher compared to deeper levels. No decrease in metal concentration with time was found in the sediments, indicating that boat owners are not complying with the ban of biocide-containing paints in freshwater introduced over 20 years ago.

Military activities have been conducted on land and at sea. Both during conflicts and in peace time, some regions served as a military training ground which included firing positions and bunkers. Mercury fulminate has been used in ammunition primers and detonators. Certain amount of ammunition was dumped into the Baltic Sea after the Second World War. Because of corroded containers, mercury can be released into the marine environment. The soil and sediment samples were taken from military training grounds, southern Baltic in 2014 and 2015. The concentration of mercury was determined by AMA-254 analyzer. Hg concentration was higher in the places of military activities, as compared to other areas. Ten times increased concentration of Hg was determined in soil sample collected in area of active gun range compared to the reference station. The significant higher concentration of mercury was detected in stations where chemical warfare agents were found.

In this study, reservoir water intended for drinking water supply was treated by (i) ultrafiltration (UF) (ii) coagulation (CW) (iii) coagulation combined with ultrafiltration (CW-UF). To probe the influences of three treatment processes on disinfection byproduct (DBP) precursors in source water, the changes of dissolved organic matter (DOM) amounts and physicochemical properties, and disinfection byproduct (DBP) formation characteristics during chlorine disinfection were investigated. Both carbonaceous DBP (C-DBP) and nitrogenous DBP (N-DBP) formation and speciation were analyzed. The influence of chlorine dose, contact time on DBP formation and speciation were also studied to optimize the disinfection conditions to minimize the DBP formation. Compared with UF and CW alone, CW-UF improved the dissolved organic carbon (DOC) removal from about 20 % to 59 %. The three-dimensional excitation and emission matrix (3DEEM) fluorescence spectroscopy analysis showed that CW-UF had high removal efficiency in microbial products (Region IV), fulvic acid-like (Region III) and humic acid-like (Region V). The total C-DBP was determined by the formation of trihalomethanes and trichloromethane was the most abundant species (40 %). The most abundant N-DBP species was dichloroacetonitrile (32.5 %), followed by trichloroactetonitrile. CW-UF effectively reduced the risk of DBPs in drinking water supply by reducing 30.8 % and 16.9 % DBPs formation potential compared with UF and CW alone. Increasing contact time improved the yields of both C-DBPs and N-DBPs. Chlorine dosage had slight influence on DBP yield in this study.

Hybrid constructed wetland (HCW) systems have been used to treat various wastewaters across the world. However, large-scale applications of HCWs are scarce, particularly for on-site improvement of the water quality of highly polluted urban rivers in semi-arid regions. In this study, a large pilot-scale HCW system was constructed to improve the water quality of the Zaohe River in Xi’an, China. With a total area of about 8000 m², the pilot HCW system, composed of different configurations of surface and subsurface flow wetlands, was operated for 2 years at an average inflow volume rate of 362 m³/day. Local Phragmites australis and Typha orientalis from the riverbank were planted in the HCW system. Findings indicate a higher treatment efficiency for organics and suspended solids than nutrients. The inflow concentrations of 5-day biochemical oxygen demand (BOD₅), chemical oxygen demand (COD), suspended solids (SS), total nitrogen (TN), NH₃-N, and total phosphorus (TP) were 125.6, 350.9, 334.2, 38.5, 27.2, and 3.9 mg/L, respectively. Average removal efficiencies of 94.4, 74.5, 92.0, 56.3, 57.5, and 69.2 %, respectively, were recorded. However, the pollutant removal rates were highly seasonal especially for nitrogen. Higher removals were recorded for all pollutants in the autumn while significantly lower removals were recorded in the winter. Plant uptake and assimilation accounted for circa 19–29 and 16–23 % of the TN and TP removal, respectively. Moreover, P. australis demonstrated a higher nutrient uptake ability and competitive potential. Overall, the high efficiency of the pilot HCW for improving the water quality of such a highly polluted urban river provided practical evidence of the applicability of the HCW technology for protecting urban water environments.

Composition of three types of honey (mixed forest honey and monofloral—black locust and rapeseed honeys) originated from the vicinity of an industrial town (Košice, Slovak Republic) was compared. Higher content of minerals including toxic metals in forest honey (1358.6 ng Ni/g, 85.6 ng Pb/g, and 52.4 ng Cd/g) than in rapeseed and black locust honeys confirmed that botanical origin rather than the distance for eventual source of pollution (steel factory) affects metal deposition. Benzoic acid derivatives were typically more accumulated in forest but cinnamic acid derivatives and some flavonoids in rapeseed honey (in free and/or glycoside-bound fraction). In terms of quantity, p-hydroxybenzoic and p-coumaric acids were mainly abundant. Total phenols, thiols, and proteins were abundant in forest honey. Some metals and phenols contributed to separation of honeys based on principal component analysis (PCA). Native amount of 5-(hydroxymethyl)furfural was not related to honey type (~11 μg/g) and was elevated after strong acid hydrolysis (200–350 μg/g) but it did not interfere with the assay of phenols by Folin-Ciocalteu reagent. This is the first report of metals and metabolites in the same study, and data are discussed with available literature. We conclude that black locust (acacia) honey is the most suitable for daily use and that central European monofloral honeys contain lower amounts of toxic metals in comparison with other geographical regions.

Benzophenone-3 (BP-3) is a popular ultraviolet absorbing chemical and has an adverse impact on aquatic ecosystems and human health. We determined the reaction kinetic constants of BP-3 and its de-proton pattern reacting with the molecular ozone or hydroxyl radical (·OH) for the first time. The obtained constant of the molecular ozone reacting with BP-3 or BP-3⁻ was 1.03(±0.21) × 10² or 1.85(±0.098) × 10⁵ M⁻¹ s⁻¹, respectively. And, the constant for BP-3 reacting with ·OH was 9.74(±0.21) × 10⁹ or 10.13(±0.25) × 10⁹ M⁻¹ s⁻¹ as using 4-chlorobenzoic acid and benzotriazole as reference compounds, respectively. The intermediates generated in the molecular ozone (12 kinds) or ·OH oxidation (18 kinds) were identified by LC-MS/MS. The removal efficiency of BP-3 in ozonation was dependent on the initial concentration of ozone, BP-3, and matrix water quality. The detoxification of BP-3 ozonation was depended on initial ozone dose using Chlorella vulgaris as the probe. Higher ozone dose increased the toxicity of the solution for more BP-3 being degraded and more intermediates formed, suggesting that the sole ozonation is not an effect approach for the degradation of BP-3 and some other energy should be combined.

The concentrations of seven heavy metals (Cr, Ni, Cu, Zn, As, Cd, and Pb) in the surface sediments of the northern portion of the South China Sea (SCS) shelf collected between 2012 and 2014 were measured to assess the potential contamination levels and determine the environmental risks that are associated with heavy metals in the area. The measured concentrations in the sediments were 12.4–72.5 mg kg⁻¹ for Cr, 4.4–29.2 mg kg⁻¹ for Ni, 7.1–38.1 mg kg⁻¹ for Cu, 19.3–92.5 mg kg⁻¹ for Zn, 1.3–12.1 mg kg⁻¹ for As, 0.03–0.24 mg kg⁻¹ for Cd, and 8.5–24.4 mg kg⁻¹ for Pb. These results indicate that the heavy metal concentrations in the sediments generally meet the China Marine Sediment Quality criteria and suggest that the overall sediment quality of the northern portion of the SCS shelf has not been significantly impacted by heavy metal pollution. However, the enrichment factor (EF) and geoaccumulation index (I gₑₒ) clearly show that elevated concentrations of Cd occur in the region. A Pearson’s correlation analysis was performed, and the results suggest that Cr, Ni, Cu, and Zn have a natural origin; Cd is primarily sourced from anthropogenic activities, with partial lithogenic components, and As and Pb may be affected by factors such as varying input sources or pathways (i.e., coal burning activities and aerosol precipitation). Heavy metal contamination mostly occurred to the east of Hainan Island, mainly because of the rapid economic and social developments in the Hainan Island. The results of this study will be useful for marine environment managers for the remediation of pollution sources.

This work investigates the influence of a high-magnitude flood event on heavy elements (HEs) pollution and mobility in the agricultural soils along Ibar River in Southern Serbia and Northern Kosovo. The study area was one of the most important Pb/Zn industrial regions in Europe. Soil samples (n = 50) collected before and after the floods in May 2014 were subjected to the sequential extraction procedure proposed by the Community Bureau of Reference (BCR). The results indicated that the floods significantly increased not only the pseudo total concentrations of HEs in the soil but also their mobile and potentially bioavailable amounts. Moreover, higher concentrations (both pseudo total and potentially bioavailable) were found in the agricultural soils closer to the industrial hotspots. Principal component analysis and hierarchical cluster analysis successfully grouped the analyzed elements according to their anthropogenic or natural origin. The floods significantly increased the potential ecological risk of HEs associated with Pb/Zn industrial activities in the study area. The potential ecological risk of Cd after the floods was highest and should be of special concern.

Mass concentrations of organic carbon (OC) and elemental carbon (EC) in size-resolved aerosols were investigated at four sites (three cities and one country) in the Beijing-Tianjin-Hebei region from September 2009 to August 2011. The size distributions of OC and EC presented large evolutions among rural and urban sites, and among four seasons, with highest peaks of OC and EC in fine mode in urban areas during winter. Geometric mean diameters (GMDs) of OC and EC in fine particles at urban sites during winter were lower than those at rural site mainly due to effects of fine particle coagulation and organic compound repartitioning. Fossil fuel emissions were a dominant source of OC and EC in urban areas, while biomass burning was a major source of OC and EC at rural site. Trajectory clustering and CWT analysis showed that regional transport was an important contributor to OC and EC in Beijing.