The composition of heavy metals (and metalloid) in surface soils of iron ore mine-impacted areas has been evaluated of their potential ecological and human health risks. The mining areas included seven selected locations in the vicinity of active and abandoned iron ore-mining sites in Pahang, Malaysia. Heavy metals such as Fe, Mn, Cu, Zn, Co, Pb, Cr, Ni, and Cd and metalloid As were present in the mining soils of the studied area, while Cu was found exceeding the soil guideline value at all sampling locations. However, the assessment of the potential ecological risk index (RI) indicated low ecological risk (RI between 44 and 128) with respect to Cd, Pb, Cu, As, Zn, Co, and Ni in the surface soils. Contributions of potential ecological risk [Formula: see text]by metal elements to the total potential ecological RI were evident for Cd, As, Pb, and Cu. Contribution of Cu appears to be consistently greater in the abandoned mining area compared to active iron ore-mining site. For non-carcinogenic risk, no significant potential health risk was found to both children and adults as the hazard indices (HIs) were all below than 1. The lifetime cancer risk (LCR) indicated that As has greater potential carcinogenic risk compared to other metals that may induce carcinogenic effects such as Pb, Cr, and Cd, while the LCR of As for children fell within tolerable range for regulatory purposes. Irrespective of carcinogenic or non-carcinogenic risk, greater potential health risk was found among children (by an order of magnitude higher for most metals) compared to adults. The hazard quotient (HQ) and cancer risk indicated that the pathways for the risk to occur were found to be in the order of ingestion > dermal > inhalation. Overall, findings showed that some metals and metalloid were still present at comparable concentrations even long after cessation of the iron ore-mining activities.

The main objective of this work concerns the coupling of biomass gasification reaction and CO₂ sorption. The study shows the feasibility to promote biomass steam gasification in a dense fluidized bed reactor with CO₂ sorption to enhance tar removal and hydrogen production. It also proves the efficiency of CaO-Ca₁₂Al₁₄O₃₃/olivine bi-functional materials to reduce heavy tar production. Experiments have been carried out in a fluidized bed gasifier using steam as the fluidizing medium to improve hydrogen production. Bed materials consisting of CaO-based oxide for CO₂ sorption (CaO-Ca₁₂Al₁₄O₃₃) deposited on olivine for tar reduction were synthesized, their structural and textural properties were characterized by Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), and temperature-programmed reduction (TPR) methods, and the determination of their sorption capacity and stability analyzed by thermogravimetric analysis (TGA). It appears that this CaO-Ca₁₂Al₁₄O₃₃/olivine sorbent/catalyst presents a good CO₂ sorption stability (for seven cycles of carbonation/decarbonation). Compared to olivine and Fe/olivine in a fixed bed reactor for steam reforming of toluene chosen as tar model compound, it shows a better hydrogen production rate and a lower CO₂ selectivity due to its sorption on the CaO phase. In the biomass steam gasification, the use of CaO-Ca₁₂Al₁₄O₃₃/olivine as bed material at 700 °C leads to a higher H₂ production than olivine at 800 °C thanks to CO₂ sorption. Similar tar concentration and lighter tar production (analyzed by HPLC/UV) are observed. At 700 °C, sorbent addition allows to halve tar content and to eliminate the heaviest tars.

Perfluorooctanoic acid (PFOA) is extremely persistent and bioaccumulative in the environment; thus, it is very urgent to investigate an effective and moderate technology to treat the pollution of PFOA. In this study, a process combined iron and granular activated carbon (Fe⁰/GAC) micro-electrolysis with VUV-Fenton system is employed for the remediation of PFOA. Approximately 50 % PFOA (10 mg L⁻¹) could be efficiently defluorinated under the following conditions: pH 3.0, dosage of Fe 7.5 g L⁻¹, dosage of GAC 12.5 g L⁻¹, and concentration of H₂O₂ 22.8 mmol L⁻¹. Meanwhile, during the process, evident defluorination was observed and the concentration of fluoride ion was eventually 3.23 mg L⁻¹. The intermediates including five shorter-chain perfluorinated carboxylic acids (PFCAs), i.e., C7, C6, C5, C4, and C3, were also analyzed by high-performance liquid chromatography tandem mass spectrometry (HPLC/MS/MS) and defluorination mechanisms of PFOA was proposed, which involved photochemical of OH·, direct photolysis (185-nm VUV), and photocatalytic degradation of PFOA in the presence of Fe³⁺ (254-nm UV).

A novel concept with the result of enzyme stabilization against microbial degradation in real bioremediation processes was developed through the encapsulation of laccase in chitosan nanoparticles. Besides of abundant information on laccase-chitosan conjugates, we report the laccase encapsulation into nanoparticles based in chitosan. The chitosan-tripolyphosphate technique was applied for the production of morphologically homogeneous enzymatic nanoparticles, with high enzyme encapsulation efficiency, small asymmetric sizes (from 40 to 90 nm), and rough surfaces. Contrary to macroscopic immobilized enzymes, temperature and pH activity profiles of nano-sized laccase were similar to those of free enzyme. The substrate affinity constant (K M) of nano-encapsulated laccase was similar to these from free enzyme, while its activity rate constant (k cₐₜ) represented 60 % of these obtained with free enzyme. Importantly, stability of nano-encapsulated laccase against microbial degradation in soil, compost, and wastewater was significantly increased. After 24 h exposure to wastewater from a treatment plant, the laccase activity of the nanoparticles was 82.8 % of initial activity, compared with only 7.8 % retained activity for free enzyme. After 36 h incubation in compost extract, the laccase nanoparticles showed 72.4 % of the initial activity, while the free enzyme was almost completely inactivated. Finally, after 84 h incubation in soil extract, the nanoparticles and free preparations showed 57.9 and 17.3 % of the initial activity, respectively. Thus, the nanoencapsulation of enzymes able to transform pollutants is an alternative to improve the operational lifetime of enzymes in real environmental applications.

The increasing use of antibiotics, especially tetracycline, in livestock feed adversely affects animal health and ecological integrity. Therefore, approaches to decrease this risk are urgently needed. High temperatures facilitate antibiotic degradation; whether this reduces transmission risk and transfer of tetracycline-resistant bacteria (TRBs) and tetracycline resistance genes (TRGs) in soil remains unknown. Successive experiments with soil columns evaluated the effects of autoclaving pig manure (APM) on soil TRB populations and TRGs over time at different soil depths. The data showed sharp increases in TRB populations and TRGs in each subsoil layer of PM (non-APM) and APM treatments within 30 days, indicating that TRBs and TRGs transferred rapidly. The level of TRBs in the upper soil layers was approximately 15-fold higher than in subsoils. TRBs were not dependent on PM and APM levels, especially in the late phase. Nevertheless, higher levels of APM led to rapid expansion of TRBs as compared to PM. Moreover, temporal changes in TRB frequencies in total culturable bacteria (TCBs) were similar to TRBs, indicating that the impact of PM or APM on TRBs was more obvious than for TCBs. TRBs were hypothesized to depend on the numbers of TRGs and indigenous recipient bacteria. In the plough layer, five TRGs (tetB, tetG, tetM, tetW, and tetB/P) existed in each treatment within 150 days. Selective pressure of TC may not be a necessary condition for the transfer and persistence of TRGs in soil. High temperatures might reduce TRBs in PM, which had minimal impact on the transmission and transfer of TRGs in soil. Identifying alternatives to decrease TRG transmission remains a major challenge.

Nitrogen (N) is considered as a key element that triggers algal boom in the Indian River Lagoon (IRL), South Florida. Intensive agriculture may have contributed to increased N input into the IRL. Runoff and storm water samples were collected in representative agricultural fields and along waterways that connect lands to the IRL from April 2013 to December 2014. Concentrations of different N species (particulate N, dissolved organic N, dissolved NH₄ ⁺-N, and NO₃ ⁻-N) and related water physical–chemical properties were measured. Total N (TN) concentrations generally decreased from agricultural field furrows to discharging point of the waterways but were generally above the US EPA critical level (0.59 mg L⁻¹) for surface water. Organic N was the dominant form of dissolved N, followed by NO₃ ⁻-N, and dissolved NH₄ ⁺-N. Concentrations and speciation of N in water varied with sites and sampling times but were generally higher in summer and fall and lower in spring and winter, as affected by the seasonality of regional hydrology and agricultural practices. Correlations occurred between N concentration, water physical properties, and rainfall. This information has important implications in the development of best management practices to minimize the impacts of agricultural practice on N loading in the Indian River Lagoon.

The role of exogenous spermine (0.25 mM Spm, a type of polyamine (PA) in reducing Cd uptake and alleviating Cd toxicity (containing 1 and 1.5 mM CdCl₂ in the growing media) effects was studied in the mung bean (Vigna radiata L. cv. BARI Mung-2) plant. Exogenously applied Spm reduced Cd content, accumulation, and translocation in different plant parts. Increasing phytochelatin content, exogenous Spm reduced Cd accumulation and translocation. Spm application reduced the Cd-induced oxidative damage which was reflected from the reduction of H₂O₂ content, O₂ •– generation rate, lipoxygenase (LOX) activity, and lipid peroxidation level and also reflected from the reduction of spots of H₂O₂ and O₂ •– from mung bean leaves (compared to control treatment). Spm pretreatment increased non-enzymatic antioxidant contents (ascorbate, AsA, and glutathione, GSH) and activities of antioxidant enzymes such as superoxide dismutase (SOD), catalase (CAT), glutathione S-transferase (GST), monodehydroascorbate reductase (MDHAR), dehydroascorbate reductase (DHAR), and glutathione reductase (GR) which reduced oxidative stress. The cytotoxicity of methylglyoxal (MG) is also reduced by exogenous Spm because it enhanced glyoxalase system enzymes and components. Through osmoregulation, Spm maintained a better water status of Cd-affected mung bean seedlings. Spm prevented the chl damage and increased its content. Exogenous Spm also modulated the endogenous free PAs level which might have the roles in improving physiological processes including antioxidant capacity, osmoregulation, and Cd and MG detoxification capacity. The overall Spm-induced tolerance of mung bean seedlings to Cd toxicity was reflected through improved growth of mung bean seedlings.

As widely used chemicals intended to protect human being from infection of microorganisms, disinfectants are ubiquitous in the environment. Among them chlorine-substituted phenol is a basic structure in many disinfectant molecules. Removal of these pollutants from wastewater is of great concern. The oxidative degradation of antimicrobial agents such as triclosan, chlorofene, and dichlorofene by a Fenton-like system Cu²⁺/H₂O₂ was examined. Reaction conditions such as temperature, initial concentrations of H₂O₂ and Cu²⁺, and pH were optimized using triclosan as a representative. The degradation kinetics of the above disinfectants followed pseudo-first-order kinetics under the investigated conditions. Fourteen chlorophenols (CPs) with different chlorine substitution were also studied to evaluate the influence of molecular structure on the degradation process in the Cu²⁺/H₂O₂ system. Fourteen structure-related parameters were calculated using Gaussian 09 program. A quantitative structure-activity relationship (QSAR) model was established using SPSS software with measured rate constant (k) as dependent variable and calculated molecular descriptors as independent variables. A three-parameter model including energy of HOMO (E ₕₒₘₒ), molar heat capacity at constant volume (C ᵥ ᶿ), and the most positive net charge of hydrogen atoms (qH⁺) was selected for k prediction, with correlation coefficient R ² = 0.878. Analyses of the model demonstrated that the C ᵥ ᶿ was the most significant factor affecting the k of chlorophenols. Variance analysis and standard t-value test were used to validate the model.