International audience | The use of biochars (BCs) and activated carbons as a way of sequestering soil-bound pollutants such as chlordecone (CLD) is increasingly being studied. This study aims at assessing the impact of Sargassum BC/AC particle size and Sargassum BC amendment rate on CLD adsorption in Nitisol and in Andosol. Four different types of carbonaceous matrices were tested: Sargasso carbon activated by phosphoric acid (SargH3PO4), Sargasso carbon activated by steam (SargH2O), biochar of Sargasso (Ch Sarg700), and a commercial activated carbon (ORBO™). In a first experiment, CLD contaminated Andosol and Nitisol were amended with 2% of each carbonaceous matrix divided into four particles size classes (< 50 µm, 50–150 µm, 150–200 µm, and > 200 µm). In a second experiment, the contaminated soils were amended with the biochar of Sargasso at five application rates (0, 0.25, 0.5, 1, and 2% (w/w)). After a 4-month aging, environmental availability tests were carried out on the soils of both experiments. The results of the first experiment showed that the best reductions of CLD environmental availability were obtained in both soils with the biochar of Sargasso and the ORBO™. More specifically, in nitisol, particle size under 50 µm of biochar of Sargasso and AC ORBO™ showed a CLD environmental availability reduction up to 72 ± 2.6% and 79 ± 2.6%. In Andosol, there was no significant difference between the three particle sizes (< 50 µm, 50–150 µm, and 150–200 µm) of the biochar of Sargasso on the reduction of environmental availability (average reduction of 43 ± 2.5%). The results of the second experiment showed that an amendment rate increase improves the immobilization of CLD. When the amendment rate was increased from 0.25 to 2%, the environmental availability was reduced by 43% in Nitisol and 50% in Andosol.

International audience | 4-hydroxyphenylpyruvate dioxygenase (HPPD) is the molecular target of β-triketone herbicides in plants. This enzyme, involved in the tyrosine pathway, is also present in a wide range of living organisms, including microorganisms. Previous studies, focusing on a few strains and using high herbicide concentrations, showed that β-triketones are able to inhibit microbial HPPD. Here, we measured the effect of agronomical doses of β-triketone herbicides on soil bacterial strains. The HPPD activity of six bacterial strains was tested with 1× or 10× the recommended field dose of the herbicide sulcotrione. The selected strains were tested with 0.01× to 15× the recommended field dose of sulcotrione, mesotrione, and tembotrione. Molecular docking was also used to measure and model the binding mode of the three herbicides with the different bacterial HPPD. Our results show that responses to herbicides are strain-dependent with Pseudomonas fluorescens F113 HPPD activity not inhibited by any of the herbicide tested, when all three β-triketone herbicides inhibited HPPD in Bacillus cereus ATCC14579 and Shewanella oneidensis MR-1. These responses are also molecule-dependent with tembotrione harboring the strongest inhibitory effect. Molecular docking also reveals different binding potentials. This is the first time that the inhibitory effect of β-triketone herbicides is tested on environmental strains at agronomical doses, showing a potential effect of these molecules on the HPPD enzymatic activity of non-target microorganisms. The whole-cell assay developed in this study, coupled with molecular docking analysis, appears as an interesting way to have a first idea of the effect of herbicides on microbial communities, prior to setting up microcosm or even field experiments. This methodology could then largely be applied to other family of pesticides also targeting an enzyme present in microorganisms.

Owing to a competitive interaction, zinc (Zn) contained in highly Cu-contained wastewater was hypothesized to mitigate Cu toxicity-induced negative effects on the growth and quality of lettuce. Thus, growth, metal accumulation and biochemical responses of lettuce irrigated with simulated wastewater (SW, control), Cu-contaminated SW (CuSW, 20 mg Cu L−1), Zn-contaminated SW (ZnSW, 100 mg Zn L−1) and both Cu- and Zn-contaminated SW (CuZnSW, 20 mg Cu and 100 mg Zn L−1) were evaluated. Results revealed that irrigation with CuSW negatively affected growth (dry matters, root length and plant height) and quality (low mineral concentrations) of lettuce, which were associated with higher Cu uptake. Irrigation with Zn + Cu-contaminated SW retrieved Cu toxicity and improved root and shoot dry matters and root length by 13.5%, 46% and 19%, respectively compared to that with alone Cu-contaminated SW. Moreover, CuZnSW improved lettuce leaf quality compared to CuSW and increased concentrations of Mg (30%), P (15%), Ca (41%), Mn (24%) and Fe (23%). Moreover, compared to CuSW, CuZnSW improved flavonoids (54%), total polyphenolic compounds (1.8-fold), polyphenolic acids (77%) and antiradical activities (16.6%). Most importantly, Zn addition boosted up lettuce Cu tolerance index by 18% under Cu-contaminated SW treatment. Pearson’s correlation analysis among various growth and mineral parameters demonstrated that shoot Zn concentration was positively related to elemental concentrations, phytochemical contents and antioxidant activity under Cu-contaminated environment. Thus, it is concluded that Zn supplementation retrieves negative effects of Cu toxicity to lettuce grown with Cu-contaminated wastewater.

Oil spills pose significant environmental risks, particularly in cold seas. In the Baltic Sea, the low salinity (from 0 to 2 up to 18) affects the behaviour of the spilled oil as well as the efficiency and ecological impacts of oil spill response methods such as mechanical collection and the use of dispersants. In the present study, mussels (Mytilus trossulus) were exposed under winter conditions (5 °C) to the water-accommodated fraction (WAF) of Naphthenic North Atlantic crude oil prepared by mechanical dispersion or to the chemically enhanced fraction (CEWAF) obtained using the dispersant Finasol OSR 51 at salinities of 5.6 and 15.0. Especially at the lower salinity, high bioaccumulation of polycyclic aromatic hydrocarbons was recorded in mussels in the CEWAF treatments, accompanied by increased biomarker responses. In the WAF treatments these impacts were less evident. Thus, the use of dispersants in the Baltic Sea still needs to be carefully considered.

High-altitude Pyrenean lakes are ecosystems far from local pollution sources, and thus they are particularly sensitive to the atmospheric deposition of metals and metalloids. This study aims to quantify the effect of human activity in 18 lakes located in both side of the France–Spain frontier. Sediment cores were collected in summer 2013, sampled at a 1cm resolution and the concentration of 24 elements was measured by ICP-MS. Statistic and chemometric analysis of the results highlights the influence of the geographical position and lithogenic features of each lake basin on trapping pollutants. More than the 80% of the lakes showed values of enrichment factor (EF) above 2 for at least one of the elements investigated in at least one core interval, which corroborates the existence of historical anthropogenic inputs of elements in the studied area. The results demonstrate the natural origin of As and Ti in Pyrenees, together with the significant anthropogenic inputs of Cd, Pb, Sb and Sn from ancient times. The data set points mining activities as the main historical source of pollution and illustrate the large impact of the industrial revolution. The regional variability could reflect also differential long-range transport, followed by dry or wet deposition.

Polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) are persistent organic pollutants (POPs) that are present as complex mixtures in all environmental compartments, including aquatic ecosystems. However, little is known about the effects of such complex mixtures on teleost behaviour. In this study, zebrafish (Danio rerio) were chronically exposed to an environmentally relevant mixture (MIX) containing 22 PCB and 7 PBDE congeners through diet from 5 days post fertilization onwards. MIX-exposed F0 fish produced offspring (F1 and F2 generations) that were fed using plain food and grown until adulthood. In each generation, five behavioural traits (i.e. boldness, activity, sociality, exploration and anxiety) were evaluated by the mean of different experimental set-ups. Two distinct behavioural syndromes were identified: boldness, positively correlated to activity and exploration; and anxiety, associated with low sociality. F0 fish did not display any behavioural disruption resulting from POP exposure whereas F1 MIX fish were bolder than fish from other generations but did not differ significantly from F1 controls. F2 MIX fish displayed a higher anxiety syndrome than F2 controls. This is of particular importance since such behavioural changes in offspring generations may have persistent ecological consequences, may affect fitness and hence cause detrimental effects on wild fish populations exposed to POP mixtures.

Since 2011, the Caribbean Islands have experienced unprecedented stranding of a pelagic brown macroalgae Sargassum inducing damages for coastal ecosystems and economy. This study measures the kinetics of metal trace elements (MTE) in Sargassum reaching different coastal environments. In July 2021, over a period of 25 days, fixed experimental floating cages containing the three Sargassum morphotypes (S. fluitans III and S. natans I and VIII) were placed in three different coastal habitats (coral reef, seagrass, and mangrove) in Guadeloupe (French West Indies). Evolution of biomasses and their total phenolic content of Sargassum reveals that environmental conditions of caging were stressful and end up to the death of algae. Concentrations of 19 metal(loid) trace elements were analyzed and three shapes of kinetics were identified with the MTE that either concentrate, depurate, or remains stable. In the mangrove, evolution of MTE was more rapid than the two other habitats a decrease of the As between 70 and 50 μg g−1 in the mangrove. Sargassum natans I presented a different metal composition than the two other morphotypes, with higher contents of As and Zn. All Sargassum morphotype are rapidly releasing the metal(oid)s arsenic (As) when they arrive in studied coastal habitats. In order to avoid the transfer of As from Sargassum to coastal environments, Sargassum stranding should be avoided and their valorization must take into account their As contents.

Plasticizers are compounds often involved in the manufacturing of plastic products. Nevertheless, the ageing of the latter generates plasticizers that generally end up in the marine environment. In fact, marine pollution by phthalate acid esters (PAEs) and their alternatives has become an environmental and health issue of serious concern, as they are largely and ubiquitously present in the environment and aquatic organisms. In the present study, four PAEs, such as diethyl phthalate (DEP), diisobutyl phthalate (DiBP), dibutyl phthalate (DBP), and di(2-ethylhexyl) phthalate (DEHP), and one non-phthalate plasticizer (NPP), namely di-2-ethylhexyl terephthalate (DEHT), are wanted in different marine compartments from the coast of Mahdia in Tunisia such as sediment, seagrass, and mussel. The most abundant and frequently detected congener was DEHT at the concentrations reached 1.181 mg/kg in the sediment, 1.121 mg/kg in the seagrass, and 1.86 mg/kg in the mussel. This result indicates that the DEHT could emerge through the food chain and therefore bioaccumulate in marine compartments. In addition, we noticed that the seasonal variations of plasticizers were seriously affected by environmental factors including industrial and urban discharges.

Fluorides are emitted in both gaseous and particle forms in the industrial sector. However, studies usually only report total fluoride content. Therefore, the study aimed to assess the particulate, gaseous fluoride and correlate it with the respirable dust particles in Single Super Phosphate (SSP), Granular Single Super Phosphate (GSSP), and administration divisions of the industry. Respirable dust particles, particulate fluoride, and hydrogen fluoride in the work environment were collected on a filter cassette containing an MCE filter paper (0.8 micron 37-mm) and Na2CO3 impregnated backup pad, respectively, using a personal sampler. The fluoride samples were analyzed using Ion Selective Electrode (ISE) and expressed as milligrams per meter cube (mg.m-3). The respirable dust, particulate, and gaseous fluoride content were found to have statistically significant differences (p<0.001) between the divisions (SSP, GSSP, and administration) in the static monitoring, whereas, in the case of personal monitoring, no significant differences were observed. Average airborne respirable, particulate, and gaseous fluoride levels in static monitoring were 1.37, 1.03, 0.20 mg.m-3, 0.018, 0.008, 0.001 mg.m-3, and 0.808, 0.403, 0.026 ppm in SSP, GSSP and administration respectively, whereas in personal monitoring the average respirable, particulate and gaseous fluoride concentrations were 1.18, 0.85, 0.30 mg.m-3, 0.0013, 0.007, 0.002 mg.m-3 and 0.356, 0.258, 0.011 ppm in SSP, GSSP and administration respectively. The present study observed that the levels of fluoride decreased with an increase in distance from SSP, followed by GSSP and administration. It indicates that the fluoride exposure was inversely proportional to the distance of the source. This study outcome will help to design a policy and intervention to mitigate fluoride exposure among workers.

Current research explains the comparison of linear and nonlinear regression methods for finding the optimal isotherm study using experimental data for the adsorption of BG on multi-walled carbon nanotubes MWCNTs. BG dye maximum adsorption onto MWCNTs occurred at pH 2 and 35°C, with the apparent equilibrium reached after 15 min. In this study, five error functions were used: ERRS, Hybrid, Chi-square (χ2), ARE, and EABS. The values of error functions suggest that the Langmuir Linear type 3 is a suitable isotherm to describe the adsorption of BG on MWCNTs. The results showed that the Langmuir isotherm is a fit good isotherm to describe the adsorption process. The coefficient of non-determination (K2) showed Hybrid, and ERRS were the preferable error functions used to predict the fit of linear and nonlinear isotherm models. Compared with other studies, MWCNTs can be used as a low-cost adsorbent with low contact time for the removal of BG dye from an aqueous solution.