A new methodology is proposed for sizing the required infrastructures for water and waste load allocation in river systems receiving return flow from agricultural networks. A nonlinear optimization model with a constraint based on conditional value at risk (CVaR) is developed to provide water and waste load allocation policies. The CVaR-based constraint limits the probabilistic losses due to existing uncertainties in available surface water. The deep uncertainties of return flow simulation model parameters, which have significant impacts on the simulated quantity and quality of agricultural return flows, are handled by using the info-gap theory. Total dissolved solid (TDS) is selected as water quality indicator and diverting a fraction of return flows to evaporation ponds is considered to control the TDS load of agricultural waste load dischargers. Quantity and TDS load of agricultural return flows over a 1-year cultivation period are simulated by using a calibrated SWAP agro-hydrological model. The results of many runs of SWAP model for different combinations of important uncertain parameters in their ranges of variations provide some response (impact) matrixes which are used in optimization model. The applicability of the proposed methodology is illustrated by applying it to the PayePol region in the Karkheh River catchment, southwest Iran. The selected strategy for water and waste load allocation in the study area is expected to provide total annual benefit of 48.64 million US dollars, while 7.84 million m³ of total return flow should be diverted to evaporation ponds. The results support the effectiveness of the methodology in incorporating existing deep uncertainties associated with agricultural water and waste load allocation problems.

A novel magnetic flocculant (CPAMF) was synthesized by using Fe₃O₄ coated with cationic polyacrylamide (CPAM) for flocculation of high turbid water. The surface morphology and chemical structures of CPAMF were confirmed by Fourier transform infrared spectroscopy (FTIR) and thermo-gravimetric analysis (TGA). X-ray diffraction (XRD) was employed to verify the crystal structure of CPAMF. The magnetic property of CPAMF was compared with Fe₃O₄ in this study. The flocculation performance by using flocculants CPAMF was evaluated in high turbid water treatment. The maximum transmittance 92.4% of kaolin suspension was achieved at corresponding optimal flocculation conditions. The result indicated that CPAMF was efficient in high turbid water flocculation. Analysis of FTIR, XRD of flocs, and zeta potential (ZP) of supernatant were accomplished for flocculation mechanism investigation. Because of low recovery factor in reflocculation under the effect of shear force on flocs, the bridging effect was found to be dominant in both acidic and alkaline conditions. Sedimentation experiments under the role of permanent magnet indicated that nano-Fe₃O₄ could effectively improve the settling property of CPAM. Graphical abstract ᅟ

Aqueous natural organic matter (NOM) contains different types of functional groups (carboxylic, phenolic, sulfidic, etc.), and hence could change the speciation of metals in environmental systems. This work is a proof-of-concept study on the interaction of three metals (Cu, Co, and Cs) with NOM using fluorescence spectroscopy. The specific aim was to determine the conditional stability constants for these three metals with NOM optical components, obtained from the quenching of fluorescence signals. Three contrasting water types were sampled in Northern Ontario: a pristine source (Cross Rd.), an urban-impacted source (Junction Creek), and an industrially impacted creek (Copper Cliff creek). In this investigation, Cu²⁺ was used as a benchmark, whereas Co²⁺ and Cs⁺ analyses were novel applications of this technique. Humic-like (H-like; terrestrial and microbial), fulvic-like (F-like), and protein-like (P-like) fluorescence components were found in various proportions at the three sampling sites. For these samples, the fluorescence signals of the H-, F-, and P-like components were quenched upon additions of Cu²⁺. The computed conditional stability constants (as log Kᶜ) ranged from 4.46 to 6.06. In contrast, Kᶜ values with Co²⁺ were measurable only for the two H-like components of the pristine sample (log Kᶜ 3.02–4.05). Cesium (Cs⁺) induced quenching only for the P-like component at the industrial-impacted site (log Kᶜ 4.82–5.03). While this study corroborates earlier reports that Cu²⁺-NOM interactions can be measured by fluorescence, we are showing for the first time a direct chemical interaction of Co²⁺ and Cs⁺ with specific NOM components, as reported by fluorescence quenching.

We assume that during flights the amount of waste that is produced is limited. However, daily, approximately 8000 commercial airplanes fly above Europe’s airspace while at the same time, more than 17,000 commercial flights exist in the entire world. Using primary data from airlines, which use the Larnaca’s International Airport (LIA) in Cyprus, we have tried to understand why wastes are produced during a typical flight such as food waste, paper, and plastics, as well as how passengers affect the production of those wastes. The compositional analysis took place on 27 flights of 4 different airlines which used LIA as final destination. The evaluation indicated that the passenger’s habits and ethics, and the policy of each airline produced different kinds of waste during the flights and especially food waste (FW). Furthermore, it was observed that the only waste management strategy that exists in place in the airport is the collection and the transportation of all those wastes from aircrafts and from the airport in the central unit for further treatment. Hence, this research indicated extremely difficulties to implement any specific waste minimization, or prevention practice or other sorting methods during the flights due to the limited time of the most flights (less than 3 h), the limited available space within the aircrafts, and the strictly safety roles that exist during the flights.

Occurrence and distribution of 24 antibiotics from 7 categories were screened in sea cucumbers (Echinodermata: Holothuroidea) collected from different coastal regions of China. The samples were simultaneously extracted and purified using accelerated solvent extraction with in-cell clean-up and analyzed by ultra-performance liquid chromatography-tandem mass spectrometry. A total of ten antibiotics were detected in the sea cucumbers with concentrations ranging from not detected to 32.8 μg/kg (dry weight). Sulfonamides are predominant antibiotics with a mean concentration of 11.5 μg/kg (dry weight), followed by macrolides (11.3 μg/kg, dry weight) and fluoroquinolones (11.2 μg/kg, dry weight). High concentrations of the antibiotics were found in the samples from the South China Sea, implying that the antibiotic pollution in sea cucumbers was geographical region-dependent, which was further confirmed by principal component analysis. It was also found that the antibiotic levels are slightly higher in instant sea cucumbers than in the dried ones. Hazard quotient calculation suggested no obvious human health risks associated with the consumption of sea cucumbers regarding antibiotics.

Spent pot liner (SPL) is a solid waste generated during the primary smelting of aluminum, and its toxicity is attributed to the presence of fluoride, cyanide, and aluminum salts, which can be leached into aquatic ecosystems. Since the effects of this waste on aquatic life forms have not yet been investigated, the objective of our study was to evaluate the toxicity of simulated leachates of SPL on zebrafish (Danio rerio). Animals were exposed to 0 (control), 0.32, 0.64, or 0.95 g L⁻¹ of SPL for 24, 72, and 96 h, and genotoxicity was accessed through micronucleus and comet assays. All of the tested treatments induced DNA fragmentation, and the observed frequency of micronuclei and damaged nucleoids generally increased with increasing SPL concentration. The highest frequency of micronuclei (3.3 per 3000 erythrocytes) was detected after 96 h of exposure with 0.95 g L⁻¹ SPL. In the comet assay, nucleoids classified with highest level of damage in relation to the control were observed principally after 24 and 96 h of exposure. The data obtained in this study confirm the genotoxicaction and mutagenic potential of SPL and indicate that open-air deposits of the waste material could represent a health risk to humans and ecosystems alike.

Household wastes may constitute a vector of environmental contamination when buried, in particular through degradation and production of leachates containing significant trace metal (TM) concentrations that may constitute a serious risk to biota. The objectives of this study were to assess the bioavailability and transfer potential of various TMs present in water and sediments in a reservoir receiving landfill leachates. An active biomonitoring approach was adopted consisting of exposing naive laboratory organisms in cages deployed in the field. Aquatic insects such as Chironomus riparius larvae are good candidates since they represent key organisms in the trophic functioning of aquatic ecosystems. The results show that water, suspended particles, and sediments were significantly contaminated by various TMs (As, Cd, Cu, Ni, Pb, and Zn). Their contribution to the transfer of TMs depends, however, on the specific element considered, e.g., Cd in sediments or Pb in both suspended particles and sediments. The internal fate of TMs was investigated according to their fractionation between an insoluble and a cytosolic fraction. This approach revealed different detoxification strategies capable of preventing the induction of deleterious effects at the individual scale. However, the accumulation of several TMs in C. riparius larvae tissues may also represent a significant load potentially transferable to higher trophic levels.

In a search for indigenous soil saprotrophic fungi for bioremediation purposes, Fusarium solani, a saprotrophic fungus belonging to the phylum Ascomycota, was isolated from a fossil carbon contaminated soil. The effect of the carbon source, glucose or olive oil, was investigated in vitro on the biomass produced by F. solani and on the degradation of benzo[a]pyrene (BaP) in mineral medium. After only 12 days of incubation, BaP degradation by F. solani was higher (37.4%) with olive oil used as the carbon source than the one obtained with glucose (4.2%). Catalase activity increased in the presence of olive oil (3.4 μkat mg⁻¹ protein) in comparison with glucose (2.1 μkat mg⁻¹ protein). When olive oil was used as the carbon source, BaP degradation increased up to 76.0% in the presence of a specific catalase inhibitor, 3-Amino-1,2,4-triazole (2 mM). This metabolic engineering strategy based both on the use of olive oil as carbon source (cultivation strategy) and on the blocking of the catalase activity could be an innovative and promising approach for fungal biodegradation of BaP and consequently for bioremediation of soil contaminated with polycyclic aromatic hydrocarbons.

There has been an increasing concern about the continuous and the sudden release of volatile organic pollutants from petroleum refineries and occupational and environmental exposures. Benzene is one of the most prevalent volatile compounds, and it has been addressed by many authors for its potential toxicity in occupational and environmental settings. Due to the complexities of sampling and analysis of benzene in routine and accidental situations, a reliable estimation of the benzene concentration in the outdoor setting of refinery using a computational fluid dynamics (CFD) could be instrumental for risk assessment of occupational exposure. In the present work, a computational fluid dynamic model was applied for exposure risk assessment with consideration of benzene being released continuously from a reforming unit of a refinery. For simulation of benzene dispersion, GAMBIT, FLUENT, and CFD post software are used as preprocessing, processing, and post-processing, respectively. Computational fluid dynamic validation was carried out by comparing the computed data with the experimental measurements. Eventually, chronic daily intake and lifetime cancer risk for routine operations through the two seasons of a year are estimated through the simulation model. Root mean square errors are 0.19 and 0.17 for wind speed and concentration, respectively. Lifetime risk assessments of workers are 0.4–3.8 and 0.0096–0.25 per 1000 workers in stable and unstable atmospheric conditions, respectively. Exposure risk is unacceptable for the head of shift work, chief engineer, and general workers in 141 days (38.77%) in a year. The results of this study show that computational fluid dynamics is a useful tool for modeling of benzene exposure in a complex geometry and can be used to estimate lifetime risks of occupation groups in a refinery setting.