As persulfate activator, Metal organic frameworks (MOFs) and derivatives are widely concerned in degradation of emerging environmental pollutants by advanced oxygen technology dominated by sulfate radical (▪) (SR-AOPs). However, the poor stability and low catalytic efficiency limit the performance of MOFs, requiring multiple strategies to further enhance their catalytic activity. The aim of this paper is to improve the catalytic activity of MOFs and their derivatives by physical and chemical enhancement strategies. Physical enhancement strategies mainly refer to the activation strategies including thermal activation, microwave activation and photoactivation. However, the physical enhancement strategies need energy consumption and require high stability of MOFs. As a substitute, chemical enhancement strategies are more widely used and represented by optimization, modification, composites and derivatives. In addition, the identification of reactive oxygen species, active site and electron distribution are important for distinguishing radical and non-radical pathways. Finally, as a new wastewater treatment technology exploration of unknown areas in SR-AOPs could better promote the technology development.

Microplastics (MPs) in the ocean have been widely recognized as causing global marine environmental problems. To gain a quantitative and comprehensive understanding of oceanic MP contamination, detailed numerical Lagrangian particle tracking experiments were conducted to evaluate the regional oceanic transport and dispersal of MPs in the South China Sea (SCS) derived from three major rivers, Pearl (China), Mekong (Vietnam), and Pasig (the Philippines), which are known to discharge large amounts of plastic waste into the SCS. As previous field surveys have suggested, MP contamination spreads from the surface to the deeper ocean in the water column, we thus considered three types of MPs: (1) positively buoyant (light) MPs, (2) positively buoyant (light) MPs with random walk diffusion, and (3) full 3-D tracking of non-buoyant MPs that are passively transported by ambient currents. Transport patterns of these MPs from the three rivers clearly showed the intra-annual variability associated with seasonally varying circulations driven by the Asian monsoons in the SCS. Many MPs floating during the prevailing southwest monsoon are transported to the northwest Pacific Ocean and the East China Sea through the Luzon Strait and the Taiwan Strait to form MP hotspots. Non-buoyant MPs are broadly transported from the surface layer to depths of approximately 100 m or deeper, where in situ observations are rare. In addition, the buoyant MPs drifting on the continental shelf originating from southern China tend to be pushed toward the shore and beached by northward wind-induced currents more pronouncedly than the non-buoyant MPs. Therefore, the river-derived MPs to the SCS were found to serve as sources to adjacent basins and oceans, to be distributed not only in the upper layer but also in the abyssal ocean (non-buoyant MPs), and to be transported to the shores (buoyant MPs).

Arbuscular mycorrhizal fungi (AMF) and plant rhizosphere microbes reportedly enhance plant tolerance to abiotic stresses and promote plant growth in contaminated soils. The co-contamination of soil by heavy metals (e.g., Cd) and rare earth elements (e.g., La) represents a severe environmental problem. Although the influence of AMF in the phytoremediation of contaminated soils is well documented, the underlying interactive mechanisms between AMF and rhizosphere microbes are still unclear. We conducted a greenhouse pot experiment to evaluate the effects of AMF (Claroideoglomus etunicatum) on maize growth, nutrient and metal uptake, rhizosphere microbial community, and functional genes in soils with separate and combined applications of Cd and La. The purpose of this experiment was to explore the mechanism of AMF affecting plant growth and metal uptake via interactions with rhizosphere microbes. We found that C. etunicatum (i) significantly enhanced plant nutritional level and biomass and decreased metal concentration in the co-contaminated soil; (ii) significantly altered the structure of maize rhizosphere bacterial and fungal communities; (iii) strongly enriched the abundance of carbohydrate metabolism genes, ammonia and nitrate production genes, IAA (indole-3-acetic acid) and ACC deaminase (1-aminocyclopropane-1-carboxylate) genes, and slightly altered the abundance of P-related functional genes; (iv) regulated the abundance of microbial quorum sensing system and metal membrane transporter genes, thereby improving the stability and adaptability of the rhizosphere microbial community. This study provides evidence of AMF improving plant growth and resistance to Cd and La stresses by regulating plant rhizosphere microbial communities and aids our understanding of the underlying mechanisms.

A broad-spectrum fungicide, dichlofluanid is widely used in antifouling paints and agricultural pesticides. In this study, the acute and chronic effects of sublethal concentrations, namely, no observable effect concentration (NOEC) and 50% lethal concentration (LC₅₀) of dichlofluanid (1/10 NOEC, NOEC, 1/10 LC₅₀, and LC₅₀) were evaluated on the marine mysid, Neomysis awatschensis. Acute toxicity test (96 h) showed higher sensitivity to dichlofluanid in juvenile mysids (LC₅₀ 3.1 μg L⁻¹) than adults (LC₅₀ 24.5 μg L⁻¹), with lower survival rate and reduction in food consumption. Exposure with dichlofluanid considerably induced oxidative imbalance, as NOEC (0.006 μg L⁻¹ for juveniles and 0.074 μg L⁻¹ for adults) and 1/10 LC₅₀ values increased intracellular concentrations of malondialdehyde and glutathione, and the enzymatic activities of catalase and superoxide dismutase, whereas exposure to LC₅₀ value decreased the values of oxidative parameters. Enzymatic activity of acetylcholinesterase decreased considerably when exposed to LC₅₀ value. In the case of chronic effects, exposure to NOEC for 4 weeks markedly decreased the juvenile survival rate, while adults showed tolerance. Multigenerational monitoring in response to NOEC showed a significant growth retardation with an increase in intermolt duration as well as a decrease in the number of newborn mysids from females of the third generation. Consistent exposure to environmentally relevant sublethal concentrations of dichlofluanid would be detrimental to mysid individuals and the survival of the mysid population.

Anthropogenic heat emission (AHE) is an important driver of urban heat islands (UHIs). Further, both urban thermal environment research and sustainable development planning require an efficient estimation of anthropogenic heat flux (AHF). Therefore, this study proposed an improved multi-source AHF model, which was constructed using diverse data sources and small-scale samples, to better represent the spatiotemporal distribution of AHF. The performances of three machine learning algorithms (Cubist, gradient boosting decision tree, and simple linear regression) were quantitatively evaluated, and the impact of spatiotemporal heterogeneity on AHF estimation was considered for the first time. The results showed that multi-source datasets and sophisticated algorithms could more effectively reduce the estimation error and improve the accuracy of the spatiotemporal distribution of AHF than simple linear regression. In practical applications, the Cubist model performed better, with prediction errors being less than 0.9 W⋅m−2. Further, the characteristics of different heat sources from the model outputs varied widely, and the building metabolic heat exhibited significant seasonal spatiotemporal variations, which were largely determined by the regional climate. In contrast, industrial and transportation heat showed marginal monthly fluctuations. Similarly, spatiotemporal heterogeneity significantly affected the estimation of building metabolic heat (0.62 W⋅m−2), but it did not affect other heat sources. The proposed improved AHF model was verified to effectively capture the spatiotemporal variations of building heat and solve the issue of overestimation of industrial heat in urban regions. This study provides new methods and ideas for the accurate spatiotemporal quantification of AHF that can supplement future studies on climate warming, UHI, and air pollution.

Antimicrobial resistance (AMR) is a recognised threat to global health. Obtaining data on the prevalence of AMR in environmental bacteria is key to understanding drivers and routes of transmission. Here, 325 Shiga toxin negative deer faecal samples—gathered from across the Scottish mainland—were screened for the presence of AMR Escherichia coli and investigated for potential risk factors associated with AMR occurrence. E. coli with resistance to antimicrobials of clinical health concern, including carbapenems and 3rd generation cephalosporins, were targeted. Ninety-nine percent of samples yielded E. coli, and the prevalence of resistant E. coli at the level of faecal samples was 21.8% (n = 71) for tetracycline, 6.5% (n = 21) for cefpodoxime, 0.3% for ciprofloxacin (n = 1), with no recorded resistance to meropenem. Potential risk factors for tetracycline and cefpodoxime resistance were investigated. The presence of broadleaved woodlands was significantly associated with both AMR phenotypes, which may relate to land use within or around such woodlands. Associated risk factors varied across resistance phenotype and deer species, with proximity or density of horses an indicator of significantly decreased and increased risk, respectively, or tetracycline and cefpodoxime resistance in E. coli from roe deer, but not from red deer. Distance from wastewater treatment plants was a significant risk factor for tetracycline resistance in E. coli from red deer but not from roe deer. Data indicated that AMR E. coli can occur in wild deer populations that are not directly exposed to the selective pressure exerted by antimicrobial treatment. Overall, resistance to critically important antimicrobials was found to be low in the studied population, suggesting no immediate cause for concern regarding human health. Utilising existing culling frameworks, wild deer in Scotland could function well as a sentinel species for the surveillance of AMR in the Scottish environment.

Neonicotinoid insecticides (NNIs) had been detected in soil and surface water frequently because of extensive use worldwide, however, data regarding regional characteristics and potential influential factors of sediment were scarce. In the present study, eight NNIs were analyzed in 86 surface sediment samples from different regions (central cities, rural areas and suburbs) and land use types (construction land and crop land) in Jiangsu Province. NNIs were widespread in the sediments, with a mean value of 1.73 ± 0.89 ng g⁻¹ dry weight (dw) (ranged from 0.41 to 3.87 ng g⁻¹ dw). Imidaclothiz (IMIZ), dinotefuran (DIN) and nitenpyram (NIT) were the dominant compounds in the surface sediment, accounted for half of combined total. The results of regional distribution analysis show that NNIs were at higher concentrations in rural areas and crop land, while the residues of NNIs in lakes were more severe compare with rivers in Jiangsu Province. Region characteristics and land use types have an influence on residues of NNIs in surface sediment. Principal component analysis showed that residues of NNIs in surface sediment in Jiangsu Province mainly originated from protect grain crops (maize), fruit (apples, pears) and vegetables in agricultural systems. The residues of NNIs were found to be mostly concentrated in the northwest and northeast in Jiangsu Province, where were the area of intensive agriculture. To investigate the residues of NNIs, while identify the contributing factors, could provide a scientific basis for basic of region environment management and pollution control.

The presence of microplastics (MPs) in freshwater systems that receive discharge of urban effluent implies a great environmental impact. In order to be able to generate proposals that solve this problem, it is necessary to know in detail the contributions of different MPs sources. The aim of this work was to study the contribution of urban sewage discharge to MPs pollution in a stream that runs through a medium-sized city. The spatial distribution of MPs with sizes between 100 μm and 1.5 mm present in surface water was measured and their characteristics, dimensions, shapes and identification were determined. Physical-chemical parameters of the stream water were measured, and a decrease in water quality was found due to wastewater treatment plants. The main source of MPs was effluent from the plants (97% of the total MPs), while the rest came from storm drains and discharge of tributaries. The maximum concentration of MPs found was around 72,000 MP/L (equivalent to 53 million MPs/s), at a point after discharge from both plants. Around 70% of MPs correspond to microfibers with a mean length of around 300 μm and a mean width of around 15 μm, and they are mainly polyethylene fibers. The remaining 30% of MPs are particles with lengths of around 140 μm. The transport of MPs between a point located after discharge of the plants and another point located about 3 km further on was studied, and no significant variation was found in the concentration of MPs. Electrical conductivity was used as a conservative tracer of MPs concentration. This work presents for the first time a detailed analysis of different contributions of MPs to a freshwater system in South America, which receives discharge of wastewater treatment plants, evidencing its important role in pollution.

Perfluoroalkyl acids (PFAAs) are widely present in human blood, and have many toxic effects on humans. However, effects of PFAA exposure on the risk of rheumatic immune diseases are limited. In the present study, occurrence of 7 PFAAs, including perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), perfluorononanoate (PFNA), perfluorodecanoate (PFDA), perfluoroundecanoate (PFUnA), perfluorododecanoate (PFDoA), and perfluorotrdecanoate (PFTrA), were measured in serum samples from 156 healthy people (controls) and 156 rheumatoid arthritis (RA) cases living in Hangzhou, China. We also investigated the relationships among cumulative PFAA levels in serum, some immune markers, and the incidence of RA. The results showed that PFOA (6.1 and 11.8 ng/mL) had the highest mean serum concentrations, followed by PFOS (3.2 and 3.4 ng/mL) and PFDA (0.86 and 2.6 ng/mL), in both controls and RA cases. Cumulative exposure to PFOA in the study population were positively correlated with the levels of rheumatoid factors (rₛ = 0.69, p < 0.01) and anti-cyclic citrullinated peptide antibody (rₛ = 0.56, p < 0.05). Moreover, significant associations of PFOA concentrations with odds ratios (OR) of RA (OR = 1.998, confidence interval (CI): 1.623, 2.361, p = 0.01) were found by adjusting for various covariates. The crude and adjusted OR for RA was respective 1.385 (95% CI: 1.270, 1.510, p = 0.04) and 1.381 (95% CI: 0.972, 1.658, p = 0.06) for a unit increase in serum PFOS levels, but the adjusted results were not significant. Overall, this case-control study found that human serum PFOA concentrations were positively correlated with RF and ACPA levels.

The terrain effect on atmospheric environment is poorly understood in particular for the polluted region with underlying complex topography. Therefore, this study targeted the Sichuan Basin (SCB), a deep basin with severe PM₂.₅ pollution enclosed by the eastern Tibetan Plateau (TP), Yunnan-Guizhou Plateaus (YGP) and mountains over Southwest China, and we investigated the terrain effect on seasonal PM₂.₅ distribution and the meteorological mechanism based on the WRF-Chem simulation with stuffing the basin topography. It is characterized that the three-dimensional distribution of topography-induced PM₂.₅ concentrations over the SCB with the seasonal shift of regional PM₂.₅ averages from approximately 30 μg m⁻³ in summer to 90 μg m⁻³ in winter at surface layer and from summertime 10 μg m⁻³ to wintertime 30 μg m⁻³ in the lower free troposphere. Such basin-forced PM₂.₅ changes presented the vertically monotonical declines concentrated within the lower troposphere below 3.6 km in spring, 2.3 km in summer, 2.6 km in autumn and 4.8 km in winter. Impacts of deep basin aggravated PM₂.₅ accumulation within the SCB and transport toward the surrounding plateaus contributing approximately 50–90% to PM₂.₅ levels over the regions of eastern TP and northern YGP. In the SCB, atmospheric thermal structure in the lower troposphere could build a vertical convergence layer between the boundary layer and free troposphere, acting as a lid inhibiting air diffusion, which was regulated by the terrain effects on interactions of westerlies and Asian monsoons, especially the wintertime strong warm lid deteriorating air pollution in the SCB. Furthermore, warm and humid air conditions within the basin prompted sulfur oxidation ratio by +0.02 and nitrogen oxidation ratio by +0.22 effectively producing the secondary PM₂.₅ in atmospheric environment.