The use of soil conditioners as bovine biofertilizer associated with mineral fertilization affect the physical and physicochemical quality of passion fruit. For fruit growth, post-harvest quality is crucial for production chain development, as it is the characteristic most used by the fresh consumption market for this fruit. In this sense, an experiment was carried out to investigate the effects of doses of bovine biofertilizer in the soil with and without nitrogen fertilization in the cultivation of yellow passion fruit. A randomized block design was adopted, with three replications in a 5×2 factorial scheme, referring to five doses of liquid bovine biofertilizer (B) diluted in water (A): 0% − control (0B + 4A); 25% (1B + 3A); 50% (2B + 2A); 75% (3B + 1A); and 100% (4B + 0A) with and without nitrogen fertilization applied to the soil. Urea was the nitrogen source used in this study. A total of 10 g plant⁻¹ of N was applied monthly at 30 and 60 days after transplanting, and after that age, 20 g plant⁻¹ was applied until the end of harvest. During the final phase of production and ripening, twelve fruits were harvested from each treatment in physiological maturation for physical and physicochemical characterization. The following analyses were performed: longitudinal diameter, transversal diameter, number of seeds per fruit, peel firmness, pulp yield, fruit peel percentage, pulp pH, soluble solids content; titratable acidity and soluble solids content/titratable acidity ratio. Data underwent analysis of variance by the F test means for nitrogen were compared by Tukey’s test and means for bovine biofertilizer, by regression. Nitrogen enhances the positive effect of bovine biofertilizer on the postharvest quality of yellow passion fruit. The association of biofertilizer and nitrogen improves fruit quality in comparison to plants without these inputs, except for pulp yield and fruit peel percentage, which suffered isolated effects from the factors. High doses of biofertilizer, above 75 and 100%, reduce soluble solids content and increase titratable acidity. The bovine biofertilizer has promising effects, but it does not replace nitrogen fertilization on the postharvest quality of yellow passion fruit.

The effect of toxic metals on roots is mainly studied in laboratory single-species experiments. Data for multi-species plant communities obtained in natural conditions are needed to understand ecosystem functioning under pollution. However, information on the industrial emission effects on the below-ground biomass is fragmentary and contradictory. This study aims to analyze the fine and coarse root mass changes along strong pollution gradients. We hypothesize that long-term soil contamination from copper smelter emissions decreases root mass in forests. We assessed the root mass in the forest litter and upper mineral soil layer along two pollution gradients caused by emissions from two copper smelters: in the Middle Urals (coniferous forests) and the Southern Urals (deciduous forests). We divided roots into two diameter fractions (0.5–2.0 mm and 2.1–5.0 mm). Only the fine root mass in the mineral soil in deciduous forests, but not the total root mass, decreased 2.2-fold near the smelter compared to uncontaminated areas. However, this effect is much weaker than for above-ground biomass, and it does not manifest at all in coniferous forests. The percentage of roots localized in the forest litter was negligible (7–10% in the coniferous forests and 2–5% in the deciduous forests) and remained unchanged along the pollution gradients. The absence of a pronounced effect of metal contamination from copper smelter emissions on the fine and coarse root mass may be regarded as evidence of plant communities’ resistance to long-term pollution through a shift in species composition toward tolerant species with high below-ground phytomass, particularly grasses.

COVID-19 pandemic has passed to the front all the contradictions of the beekeeping sector: the valuable role of bee products as immune enhancers and antiviral agents and the impact that unsustainability of human activities has on bees’ health and survival. The COVID-19 emergency led several countries to adopt severe restriction measures to contrast the infection. The lowering of industrial and commercial activities, transports, and the general lockdown had immediate consequences on the air quality, significantly improving environmental conditions. This had a positive impact on honeybees’ life’s quality. On the other hand, the bee and beehive transportation limitations threaten to hit food production by affecting the pollinator service, and this is particularly true in large, food-exporting countries like the USA and China where due to the few numbers of local bees, beekeepers import them by other countries and convey by truck hives for thousands of kilometers to pollinate crops. Furthermore, honeybee products, focusing on their natural pharmacological properties, can play an essential role as a potential natural contrast to the virus by enhancing the immunity defenses of both humans and animals, and their demand by consumers is expected to increase. Several researchers in the last months focused their attention on bee products to evaluate their effect in the cure of COVID-19 patients to ameliorate the symptoms or to contrast the coronavirus directly. This review reports these preliminary results.

Converting food waste into animal feed is highly useful for tackling the problem of food waste, which is particularly severe in developed countries. This study quantified the inefficiencies in converting food waste into animal feed and identified the sources of inefficiencies through a data envelopment analysis (DEA) of the monthly input–output data of two food waste–based animal feed producers in Japan. Our empirical analysis revealed that the producers of animal feed obtained from food waste (especially those treating food waste from retail and service industries) demonstrated inefficiencies in production technology and scale; moreover, expanding the production scale and improving the quality of food waste could enhance production efficiency. Based on the empirical results, specific policy implications were provided for the widespread use of animal feed obtained from food waste in Japan and elsewhere, globally. Furthermore, it was suggested that the COVID-19 pandemic contributed to a severe reduction in the production efficiency of animal feed producers treating food waste obtained from retail and service industries.

There are many risk factors associated with the spread of the COVID-19 pandemic, including low wind speed, fossil fuel energy production, air pollution, and smoking. Several studies argue that smoking is not a risk factor for COVID-19 morbidity among males or any other sub-group. The study aims to analyze the following research questions: (1) can smoking prevalence explain COVID-19 indicators (cases, mortality, and recovery)? Are these relationships monotonically increasing or decreasing? In an attempt to test the counter-intuitive possibility of a non-linear relationship, the proposed empirical model relaxes the assumption of monotonic change by applying the quadratic design and testing which one of the two competing models (quadratic or linear) better fits the data. Findings suggest more complex relationships between corona indices and prevalence of smoking than previously thought. These patterns might be explained by several conditions such as the attenuation of hypercytokinemia for mild levels of smoking prevalence compared with non-smokers, elevated social distancing of smokers in countries with lower smoking prevalence, and unidentified factors that should be examined in future research.

Alkaline pretreatment (APT) is the promising disintegration pretreatment for the anaerobic digestion (AD) of sewage sludge (SS) to improve digestion efficiency and methane yields. In this study, the heavy metals (HMs) were observed to be leached from SS in the APT process, which could lower the HMs secondary pollution risk of the residual biosolids after AD in land application. The sequential chemical extraction (SCE) experiment was performed to determine the variation in HMs’ distribution prior to and after the APT. The alkaline extracts were characterized in order to elucidate the HMs’ release mechanism. The APT could cause significant release of Zn and Cu with a maximum release efficiency of 96.6% ± 4.6% and 62.7% ± 8.4% under the condition of 1.5 mol/L NaOH and 25 ℃, respectively. The release efficiency of Zn and Cu was reduced by 63.0% and 21.7%, respectively, due to the extra addition of 0.25 mol/L NaCl at a NaOH concentration of 1.25 mol/L in the APT process. The release of Zn and Cu may be attributed to a complex process including disruption of microbial cells in SS, solubilization of organic matters bounded with metals, and the chemical leaching reaction of minerals. This study demonstrates the possibility to remove the Zn and Cu from the SS in the APT process before the AD disposal.

The recycling of scrap tires has become an important issue in the area of environmental protection in the past 20 years. In recent years, tire strips and tire-derived aggregates (TDA) have been used in geotechnical engineering projects. Both reinforcement methods are proved available to improve the horizontal resistance of stabilized structures. This study reported a new method which combined tire strips and TDA utilization in order to investigate if such combinations could further improve the stability of retaining structures. The shear properties of TDA reinforced sand with different tire content levels (0%, 10%, 20%, and 30%) were measured using direct shear tests. The pullout behaviors of tire strips with and without transverse ribs embedded in pure sand/TDA reinforced materials were then compared. Based on the obtained results, a new calculation method was proposed for the estimation of the peak pullout resistance of tire strips embedded in TDA-reinforced sand, with the interference of transverse ribs and different tire content levels of the TDA-reinforced sand taken into consideration. The test results revealed that a tire content level of 20% was the optimal proportion of TDA-reinforced sand. Meanwhile, the model tests proved that the end resistance provided by transverse ribs could largely enhance the ultimate pullout capacity of soil structures. Therefore, it was concluded that the proposed methods were feasible in scrap tire recycling projects, and the test results and proposed calculation method could potentially provide important references for the future designs and construction of tire strip stabilized retaining walls.

In modern agricultural practice, heavy metal (HM) contamination is one of the main abiotic stress threatening sustainable agriculture, crop productivity, and disturb natural soil microbiota. Different reclamation techniques are used to restore the contaminated site; however, they are either costly or unable to remove contaminant when concentration is very low. In such circumstances, bioremediation is used as a novel technique involving microbes for soil restoration. In the current project, Aspergillus welwitschiae(Bk) efficiently endure metal stress (i.e., Cr-VI and As-V in the form of K₂Cr₂O₇ and Na₃AsO₄) up to 1200 μg/mL and enhanced the production of phytohormones, i.e., 54.83 μg/mL of indole acetic acid (IAA) compared to control 15.56 μg/mL, solubilized inorganic phosphate, and produced stress-related metabolites. The isolate Bk was able to enhance growth of soybean by showing higher root shoot length and fresh/dry weight under stress (p<0.05). Besides, the strain strengthened the antioxidant system of the host increasing enzymatic antioxidants, i.e., catalases (CAT) by 1.58 and 1.11 fold, ascorbic acid oxidase (AAO) by 6.75 and 7.94 fold, peroxidase activity (POD) by 1.12 and 1.37 fold, and 1,1-diphenyl-2-picrylhydrazyl (DPPH) by 1.42 and 1.25 fold at 50 μg/mL of chromate and arsenate. Thus, actively scavenging the reactive oxygen species (ROS) produced results in lower ROS accumulation and high ROS scavenging. On the other hand, the isolates cut down Cr and As uptake by approximately 50% at 50 μg/mL from the medium while bio-transforming it, thereby stabilizing it and assisting the host to resume normal growth, thus avoiding phytotoxicity. It is evident from the current study that A. welwitschiae may potentially be used as a bioremediating agent for reclamation of Cr- and As-contaminated soil.

Pandemics leave their mark quickly. This is true for all pandemics, including COVID-19. Its multifarious presence has wreaked havoc on people's physical, economic, and social life since late 2019. Despite the need for social science to save lives, it is also critical to ensure future generations are protected. COVID-19 appeared as the world grappled with the epidemic of climate change. This study suggests policymakers and practitioners address climate change and COVID-19 together. This article offers a narrative review of both pandemics' impacts. Scopus and Web of Science were sought databases. The findings are reported analytically using important works of contemporary social theorists. The analysis focuses on three interconnected themes: technology advancements have harmed vulnerable people; pandemics have macro- and micro-dimensions; and structural disparities. To conclude, we believe that collaborative effort is the key to combating COVID-19 and climate change, while understanding the lessons learnt from the industrialised world. Finally, policymakers can decrease the impact of global catastrophes by addressing many socioeconomic concerns concurrently.

Freely dissolved OCPs and PCBs were measured by using polyethylene passive samplers at 15 sites during 2014 throughout the stretch of the Indus River to investigate the spatial pattern and risk assess. Levels (pg/L) of dissolved ∑OCPs and ∑PCBs ranged from 34 to 1600 and from 3 to 230. Among the detected OCPs, dissolved DDTs (p,p′-DDE, followed by p,p′-DDT) predominated with levels of 0.48 to 220 pg/L. The order of occurrence for other studied OCPs was as follows: HCB, endosulfans, chlordanes, and HCHs. Spatially, dissolved (pg/L) ∑OCPs varied (p < 0.05) as the following: surface water of the alluvial riverine zone (ARZ) showed the highest levels (114) followed by the frozen mountain zone (FMZ) (52.9), low-lying zone (LLZ) (28.73), and wet mountain zone (WMZ) (14.43), respectively. However, our zone-wise PCB data did not exhibit significant differences (p > 0.05). Principal component analysis/multilinear regression results showed pesticide usage in the crop/orchard fields and health sector, electric and electronic materials, and widespread industrial activities as the main source of OCPs and PCBs along the Indus River. Our results showed that OCPs and PCBs contaminated water intake, playing an important role towards the considerable cancer/non-cancer risk (HI and CR values) along the Indus River Flood-Plain.