In the present study, the spatiotemporal evaluation of the Climate Hazards Group InfraRed Precipitation with Station (CHIRPS) satellite precipitation product is performed in capturing meteorological drought over different climatic regions of Iran. The performance of the product as a high spatial resolution dataset in monitoring drought is evaluated against the 68 meteorological stations from short to long scale (i.e., SPI1, SPI3, SPI6, SPI9, and SPI12) in the period of 1987 to 2017. Besides, the capability of the CHIRPS in detecting drought events is assessed in different drought classes. The results suggest that the climate type, the time scale, and the drought class affect the quality of the CHIRPS performance. The CHIRPS offers the best performance in the detection of all drought events with SPI < − 1 over the SPI1 (0.69 < POD < 0.85). However, the product provides the worst performance for SPI12 (0.50 < POD < 0.70). At the country level, the highest agreement between the CHIRPS- and observation data-based SPI is found over the SPI6 (CC = 0.56), while the lowest is observed over the SPI12 (CC = 0.47). Based on the temporal evaluation, the G6 (0.18 < CC < 0.44, 1.06 < RMSE < 1.28) and G8 (0.17 < CC < 0.43, 1.06 < RMSE < 1.29) regions located in the southern coast of the Caspian Sea have an inadequate performance. However, the southern parts (G4 region) (0.38 < CC < 0.65, 0.83 < RMSE < 1.27) and the northwestern area (G3 region) (0.53 < CC < 0.62, 0.87 < RMSE < 0.97) of the country offer the best performance. The spatial evaluation describes the high accuracy (CC > 0.7, RMSE < 0.5) in some regions, including the western parts of G1, the northern area of G3, and the southern parts of G4. The research findings provided an important opportunity to advance the understanding of drought monitoring over the different climatic regions based on the high-resolution satellite precipitation products.

The enrichment of cadmium (Cd) in black shale–derived soils is of increasing concern due to its wide occurrence, high Cd concentrations, and potential risks. However, characteristics of enrichment and environmental availability of Cd in these soils are not well understood, which has restricted pollution control and land management. In this study, agricultural soils with elevated Cd concentrations resulting from weathering of Cd-bearing black shale in southwestern China were collected and analyzed. The results showed that Cd could be retained in soils through mechanical inheritance and/or associated with secondary minerals and organic materials. Cd concentrations in soils of the study area ranged between 0.83 and 21.6 mg/kg (average of 5.20 mg/kg), exceeding the risk screening value for agricultural land in China. The heterogeneity of Cd in these soils was highly related to geochemical composition of parent rock and other natural factors. The 0.01 M CaCl₂ and 0.05 M EDTA extraction showed that Cd in these soils had high environmental availability and potential risks. Mobile Cd pool (CaCl₂ extractable Cd, average: 0.24 mg/kg) accounted for 0.07–38.9% of the total Cd, depending on soil pH. Mobilizable Cd pool (EDTA extractable Cd, average: 2.18 mg/kg) accounted for 22.0–100%. These results showed the significance of geochemical background on enrichment of Cd in soils, documented high environmental availability of Cd in black shale–derived soils, and influence of soil pH.

The salinization of grassland in arid and semi-arid areas is a serious environmental issue in China. Halophytes show extreme salt tolerance and are grown in saline-alkaline environments. Their rhizosphere microorganisms contribute significantly to plant stress tolerance. To study bacterial and fungal community structure changes in Chinese ryegrass (Leymus chinensis) rhizosphere soil under salt and alkali stress, pot experiments were conducted with different salt and alkali stress intensities. High-throughput sequencing was conducted, and the microbial diversity, community structure, and driving factors were analyzed in rhizosphere soil. The salinization of grassland in arid and semi-arid areas is a serious environmental issue in China. Halophytes show extreme salt tolerance and grow in saline-alkaline environments. A total of 549 species of bacteria from 28 phyla and 250 species from 11 phyla of fungi were detected in the rhizosphere soil of Leymus chinensis with different saline-alkali gradients. Alpha diversity analysis along saline-alkali gradients showed that bacterial community richness and diversity were the highest in the moderate saline-alkali group (pH = 8.28, EC = 160.4 μS·cm⁻¹), while fungi had high richness and diversity in the control group (pH = 7.35, EC = 134.5 μS·cm⁻¹). The bacteriophyta Proteobacteria, Acidobacteria, Plantomycetes, and the eumycota Ascomycota, Basidiomycota, and Glomeromycota were found with relative abundances of more than 10%. Saline-alkali gradients had significant effects on the abundance of the bacterial and fungal groups in the rhizosphere. The distribution of bacterial colony structure was not significant at the species level (P > 0.05). However, there were significant differences in the distribution of fungal structure and considerable differences in the composition of fungal species among the moderate saline-alkali group, severe saline-alkali group, and control group (P < 0.05). Correlation analysis showed that the bacterial phylum Gemmatimonadetes had a highly significant positive correlation with pH and EC (P < 0. 01). Saline-alkali stress significantly inhibited the abundance of the bacteria Latescibacteria, Cyanobacteria, and Bacteroides, and the fungi Zoopagomycota, Mortierllomycota, and Cryptomycota (P < 0. 05). Compared with fungi, bacterial community composition was most closely correlated with soil salinization. This report provided new insights into the responses of relationships between rhizosphere soil microorganisms and salt and alkali tolerance of plants.

Optimization of fuel injection strategies can maximize the utilization of ternary fuel by addressing the issues concerning fuel consumption, engine performance, and exhaust gas emission. In the midst of the pervasiveness of plant-based biofuel, this paper focused on maximizing the mahua oil biodiesel usage in a diesel engine having a common rail direct injection (CRDI) system without any engine modifications. The crude oil extracted from the seeds of Madhuca longifolia is known in India as mahua butter and has shown impressive fuel properties such as lower viscosity, flashpoint, boiling point, and comparable calorific value to diesel. 1-Pentanol, which has a chain of five carbons and can easily be blended with both diesel and biodiesel, is a promising type of alcohol for the future. In this study, the influence of fuel injection pressure with ternary fuel (diesel + mahua methyl ester + pentanol) on engine characteristics of CRDI diesel engine was analyzed. The fuel injection pressure is varied from 20 to 50 MPa so that ternary fuel can be properly utilized. The high injection pressure of 50 MPa has better combustion characteristics and higher brake thermal efficiency (4.39%) value than other injection pressure values. A better mixture is formed due to well-atomized spray, and as a result, the levels of CO (22.24%), HC (9.49%), and smoke (7.5%) fall with the increase in injection pressure. The usage of ternary fuel raised the NOₓ emission (12.46%) value and specific fuel consumption (SFC) with a decrease in the BTE (brake thermal efficiency) which attributes to its properties and combustion characteristics.

Propylene glycol (PG) is widely used in the foods, pharmaceuticals, oil industry, animal feed, cosmetics and other industries. Because of the existence of a chiral carbon center, PG forms R (Rectus)- and S (Sinister)-enantiomers. Currently, the toxicity study of its R-, S-enantiomers is still very scarce. In this study, we have assessed the developmental toxicity and neurotoxicity of the R-, S-, and RS-PG enantiomers in zebrafish larvae. We found that exposure to R-, S-, and RS-PG enantiomers did not significantly affect the basic developmental endpoints of embryos or larvae (i.e., embryonic movement, hatching, mortality, malformation, heartbeat, body length), indicating that R-, S-, and RS-PG exposures did not exhibit the basic developmental toxicity in zebrafish larvae. The toxicity of three enantiomers was lower than that of ethanol, and there was no significant difference between them. However, R-, S-, and RS-PG exposures with high doses could significantly change the eye diameter and locomotor activity of larval zebrafish, indicating that R-, S-, and RS-PG enantiomers of high doses could potentially exhibit the neurotoxicity and ocular developmental toxicity in zebrafish larvae. Therefore, the potential neurotoxicity and ocular developmental toxicity of R-, S-, and RS-PG enantiomers for infants and toddlers should be considered.

A series of sodium polysulfides (SPSs) with different sulfur indexes was prepared as stabilizers to amend elemental mercury-contaminated artisanal small-scale gold mine (ASGM) tailings in Hubei, China, by controlling the molar ratio of sulfur and sodium sulfides as 1:1, 2:1, 3:1, and 4:1 during the synthesis. XRD, XPS, and laser Raman spectroscopy all suggested that the synthesized SPSs were a mixture of multiple polysulfides, sulfur, sodium sulfides, and sodium thiosulfate. Based on toxicity characteristic leaching procedure test (TCLP), mercury stabilization efficiency of SPSs was evaluated and proved to be more superior than sulfur, sodium sulfide, and also calcium polysulfide, with an optimal stabilization efficiency of 97.16% at SPS/THg = 1:2, SPSs pH = initial pH, and liquid-to-solid ratio = 20:7. A pseudo-second-order kinetic model was able to interpret the stabilization kinetics and demonstrated that mercury stabilization rate increased with the sulfur index in the SPSs, but excess SPSs were potentially to inhibit the precipitation of mercury. Speciation analysis results determined with sequential extraction indicated that the unstable mercury, elemental mercury, and organic-bound mercury fractions decreased respectively by up to 88.6%, 53.5%, and 26.3%. Pearson correlation analysis showed that the mercury stabilization in the mine tailings amended with SPSs mainly occurs from the precipitation of the elemental mercury, and the organic mercury fraction reduction was correlated with the decrease of the unstable mercury.

Iron-bearing clay minerals and arsenic commonly coexist in soils and sediments. Redox oscillation from anoxic to oxic conditions can result in structural Fe(II) oxidation in clay minerals. However, the role of structural Fe(II) oxidation in clay minerals on arsenic immobilization is still unclear. In this study, we found that oxidation of structural Fe(II) in bioreduced clay mineral nontronite (NAu-2) triggered As(III) adsorption onto NAu-2. As(III) was adsorbed onto NAu-2 through ligand exchange with hydroxyl groups which were generated by the oxidation of structural Fe(II) in NAu-2. In addition, oxidation of structural Fe(II) led to the oxidation of As(III) to As(V), which further enhanced the adsorption of dissolved As(III) on NAu-2. Therefore, the adsorption capacity of As(III) onto oxidized NAu-2 was 1.6 times higher than that of native NAu-2. Oxidation of structural Fe(II) was a two-stage process that proceeded from exterior sites to interior sites, and the immobilization and oxidation of As(III) occurred predominantly at the rapid exterior structural Fe(II) oxidation stage. Our findings highlight that the oxidation of structural Fe(II) in iron-bearing clay minerals may play an important role in arsenic immobilization and transformation in the subsurface environment.

Plasticizers such as di(2-ethylhexyl) phthalate (DEHP) and tris (2-butoxyethyl) phosphate (TBOEP) are manufactured chemicals produced in high volumes. These chemicals are frequently detected in the aquatic environment and cause toxic effects on organisms. In this study, we assessed the chronic impacts of DEHP and TBOEP, respectively, at the concentration of 100 µg L⁻¹ dissolved in the artificial medium (M4/4) and Mekong River water on life history traits of a tropical micro-crustacean, Ceriodaphnia cornuta, for 14 days. DEHP and TBOEP substantially reduced the survival of C. cornuta. In M4/4 medium, both plasticizers strongly enhanced reproduction but did not influence the growth of C. cornuta. Mekong River water, plasticizers-exposed C. cornuta produced less neonates than those in the control. The detrimental impacts of DEHP and TBOEP on the fitness of C. cornuta were much stronger in natural river water than in M4/4. Our results suggest that plasticizers can cause adverse effects on tropical freshwater cladocerans, particularly in natural water. These results are of a deep concern, as national and international regulatory guidelines which are based on ecotoxicological tests using standard media may not fully capture these effects.

Rice consumption is one of the major cadmium (Cd) exposure routes for human. Bangladeshi people have historically subsisted on a rice-based diet; however, only a few reports have investigated Cd accumulation by different rice cultivars in Bangladesh. This study was designed to investigate the uptake and accumulation of Cd in different rice cultivars and associated health risks to humans eating rice. A pot experiment was conducted to grow eight amon rice varieties under control, 5 and 10 mg Cd/kg soil under open air conditions. After harvesting the Cd fractionation, bioavailable Cd and rice grain Cd content were determined. Cd spiked as Cd²⁺ enriched the Cd bioavailability to plant by 35% (in 5 mg/kg stress) and 85% (in 10 mg/kg stress). There were variations among the rice varieties in their ability to accumulate Cd in grain and this was found to be 15-fold higher under control conditions. Grain Cd content significantly differed among the rice varieties at each level of soil Cd. In this study, BR-52 emerged as the most Cd-safe cultivar followed by BR-75, Rani salut, BR-71, BR-49, BR-76, BR-87 and lastly, BINA-7. Most of the agronomic parameters of rice concerning yield were affected by both rice varieties and soil Cd level. In different rice varieties, rhizosphere pH increased through root exudation which ultimately produced equilibria among the five major soil Cd fractions so that Cd became bioavailable to plants. All rice varieties showed high hazard quotient (HQ) values under Cd stress conditions and posed a risk to human health. For noncarcinogenic health risk assessment through HQ, we recommend 0.1 mg Cd/kg rice grain be used as the maximum allowable concentration (MAC) in calculating health risk for Bangladeshi people.

Plastics are increasingly being used in consumer products due to its versatility in many applications. However, these plastics may contain inorganic elements that may be harmful to humans. To determine any potential health risk of plastics, it was important to characterize elemental composition of plastics and assess usage patterns. To investigate plastic usage in a typical Jamaican household and to characterize the inorganic elements in consumer plastics using XRF analyzer. About 200 questionnaires were distributed to households to determine the types and quantity of plastics. A total of 130 plastic samples from 7 categories were collected and measured for inorganic elements using handheld XRF. Household plastics were mainly used for storage and personal hygiene products. On average, 10% of plastics were recycled, while 30% were burned. Inorganic elements present in plastic samples were Cl > Ti > Ba > Fe > Zn > Sb > Cr > Br > Cu > V > Pb > As. Elemental concentrations varied based on the category of plastics. Green plastics had the highest concentrations of each type of elements. This study provided useful information on characterizing the different types of elements present in common household plastics. Results from the survey were used to assess participants’ attitude and behaviors towards plastics usage and disposal. It was important to obtain a profile of plastics waste from a typical household. This will allow for more targeted strategies to reduce plastics pollution.