The effect of Zataria multiflora (Z. multiflora) on serum cytokine, chemokines, and respiratory symptoms in the veterans exposed to sulfur mustard (SM) more than two decades (27–30 years) ago was conducted in 2018. Thirty-four patients were randomly assigned to the placebo group (P, mean age (54.40 ± 5.51)) and two treated groups with Z. multiflora extract 5 and 10 mg/kg/day (Z5 and 10; mean age, 58.50 ± 3.60 and 55.18 ± 4.11, respectively). Serum levels of tumor necrosis factor (TNF-α), monocyte chemotactic protein 1 (MCP-1), vascular endothelial growth factor (VEGF), epidermal growth factor (EGF), forced expiratory volume-one second (FEV₁), and respiratory symptoms including chest wheeze (CW), night wheeze (NW), night cough (NC), and cough and wheeze during exercise (ECW) were assessed at the baseline (phase 0), 1 and 2 months after starting treatment (phase I and II, respectively). The value of FEV₁ was significantly increased in Z10 in phase I and II compared with that in phase 0 (p < 0.01 for both) and in Z5 in phase II compared with phase I and 0 (p < 0.001for both). All respiratory symptoms significantly decreased in Z5 and 10 in phase I and II compared with those in phase 0 (p < 0.05 to p < 0.001). Serum levels of TNF-α and VEGF were decreased in Z5 and 10 in phase I and II compared with those in phase 0 (p < 0.05 to p < 0.001). Serum levels of MCP-1 and EGF were decreased in Z10 in phase I and II compared with those in phase 0 (p < 0.05 to p < 0.001). The percent change of respiratory symptoms, serum levels of cytokines during the treatment period, was significantly improved in the treated groups compared with that in the placebo group. Two months’ of treatment with Z. multiflora improved cytokine levels, respiratory symptom, and FEV₁ values in SM-exposed patients.

Fifty-five samples were collected from topsoils around a petrochemical industrial area at the east of Algiers (Algeria) and analyzed for 16EPA priority PAHs in the aim to determine the concentrations, the distributions, and the possible sources of polycyclic aromatic hydrocarbons (PAHs). The results of the quantification are then devoted to the assessment of the potential risks as the toxicity, the risk for the ecosystem, and the risk for the human health. The sampling sites were classified into four categories: rural, suburban, urban, and industrial-urban. A new extraction method based on the insertion of a preliminary step, using hot water, was proposed to improve the extraction efficiency. Principal component analysis (PCA) and selected diagnostic ratio of PAHs were used to investigate the source apportionment of these PAHs. The potential toxicity, the ecological, and human health risk of PAHs in soil were estimated using the toxic equivalent quotient, the risk quotient, and the total lifetime cancer risk (TLCR) methods, respectively. The proposed new protocol gave improved recovery rates for the sixteen EPA PAHs particularly for low molecular weight PAHs, with satisfactory repeatability (RSD < 10%). The Σ16PAHs concentrations were varied from 143.73 to 4575.65 μg kg⁻¹ with a mean value of 1209.56 μg kg⁻¹. Σ16PAH concentrations found for the industrial areas would be 2 times higher than for urban soils and 3 times higher than for the rural soils. The biplots of PCA and the five diagnostic ratios suggested that the most sources of PAHs in the rural, the suburban, and the urban areas are traffic emissions, biomass burning, and coal combustion sources. Some points of the urban-industrial area are from the petroleum source. The found Σ16PAH concentrations and theirs calculated TEQs showed the following trend: industrial-urban > urban > suburban >rural. The potential cancer of human health risks calculated through TLCR results indicated that the exposure to the 7EPA PAH-contaminated soils produces negligible cancer risk to human health.

In recent years, off-site volumetric construction has been promoted as a viable strategy for improving the sustainability of the construction industry. Most prefabricated prefinished volumetric construction (PPVC) structures are composed of either steel or concrete; thus, it is imperative to carry out life cycle assessments (LCAs) for both types of structures. PPVC is a method by which free-standing volumetric modules—complete with finishes for walls, floors, and ceilings—are prefabricated and then transferred and erected on-site. Although many studies have examined these structures, few have combined economic and environmental life cycle analyses, particularly for prefinished volumetric construction buildings. The purpose of this study is to utilize LCA and life cycle cost (LCC) methods to compare the environmental impacts and costs of steel and concrete PPVCs “from cradle to grave.” The results show that steel necessitates higher electricity usage than concrete in all environmental categories, while concrete has a higher emission rate. Steel outperforms concrete by approximately 37% in non-renewable energy measures, 38% in respiratory inorganics, 43% in land occupation, and 40% in mineral extraction. Concrete, on the other hand, performs 54% better on average in terms of measures adopted for greenhouse gas (GHG) emissions. Steel incurs a higher cost in the construction stage but is ultimately the more economical choice, costing 4% less than concrete PPVC owing to the recovery, recycling, and reuse of materials. In general, steel PPVC exhibits better performance, both in terms of cost and environmental factors (excluding GHG emissions). This study endeavors to improve the implementation and general understanding of PPVC.

Human civilization has reached an unprecedented height, but the industrialization of economic development also brings global warming, ozone depletion, acid rain, fresh water resources crisis, energy shortage, and environmental problems. In autumn and winter, haze becomes the usual state in the modern society, and PM2.5 has been becoming an important form of air pollution. The research found that PM2.5 brings great influence to the human body or daily life. To some extent, the PM2.5 also affects the propagation of electromagnetic waves near the ground, reducing the transmission performance of electromagnetic wave. Based on Mie scattering theory, this paper qualitatively analyzed the scattering effects of PM2.5 particles on every frequency band of electromagnetic wave in daily use. Then the paper takes the satellite navigation signals as a research example, selecting university of Wyoming Davis stations in Antarctica sounding data by measuring the tropospheric atmospheric meteorological parameters (including the atmosphere pressure, geopotential height of different layers, dew point temperature, relative humidity and specific humidity, wind direction, wind speed, and temperature). The paper inversed the refractive index distribution of the troposphere based on AlexNet model and described the error quantitatively. The simulation results show that the estimated error is less than 5.1455%, proving the high accuracy of the AlexNet model. To test the influence of PM2.5, the paper takes Jiuquan, a city with serious pollution, as an example. Comparison between the inversion results and IGS products shows that high concentration of PM2.5 pollution has little influence on the inversion of refractive index profile.

Given the recent extensive synthesis and application of ionic liquids (ILs), finding a sensitive and visual indicator to provide a fast-initial risk assessment of IL use has become a pressing issue. In this study, we verified that the phototaxis of Chlamydomonas reinhardtii is a valid indicator of the environmental risk associated with chiral ILs L-(+)- and D-(−)-1-butyl-3-methylimidazolium lactate (BMIM L). Briefly, C. reinhardtii was exposed to a 4000-lx side light source for varying lengths of time. Following the allotted exposure time, the algae aggregation was photographed, and then quantitative analysis was conducted using Image-J software to obtain the corresponding relationship between IL stimulation and C. reinhardtii phototaxis. The gray areas from each treatment were measured and the percentage was calculated. After 16 h of side lighting, for control, the percentage of gray areas was − 22%, while for L-(+)- and D-(−)- BMIM L were 17% and 33%, respectively. Then, after 8 h of darkness, where D-(−)-BMIM L and the control showed the positive phototaxis, but the L-(+)-BMIM L-treated group showed virtually no change. This phenomenon is consistent with excessive production of reactive oxygen species (ROS). Moreover, atomic force microscope (AFM) results indicated distinct aggregation between D-(−)- and L-(+)-BMIM L, which caused changes in cell permeability that induced a change in ROS transfer. Furthermore, relationship between phototaxis and changes in cell ultrastructure and photosynthetic efficiency was also investigated. This work demonstrates the potential of phototaxis to serve as a sensitive, convenient, and cost effective qualitative assessment of ILs’ toxic impact, with the understanding that quantitative evaluation requires further improvement.

Arsenic is a major environmental toxicant of concern, affecting both female and male reproductive systems. The present study was conducted to investigate the toxic effects of arsenic on semen quality and reproductive hormones of Teddy bucks, an important domestic species in regions of Pakistan. In addition to arsenic, vitamin C was fed to a subset of animals to determine if there were ameliorative effects on reproductive parameters. Sixteen adult Teddy bucks were randomly divided into four experimental groups: A (control), B (arsenic 5 mg/kg BW/day orally), and C (arsenic 5 mg/kg BW/day plus vitamin C of an oral dose of 200 mg/kg BW/day). The animals in experimental group D were given only vitamin C (oral dose of 200 mg/kg BW/day). Animals were fed treated food once a day for 12 weeks. Semen quality parameters (volume, motility, count, sperm morphology, live dead ratio, sperm membrane integrity, and sperm DNA integrity) of bucks from each experimental group were evaluated on a weekly basis. Hematology and the level of arsenic in the blood were assessed every 2 weeks. Serum was collected fortnightly to measure reproductive and stress hormones (testosterone, luteinizing hormone, follicle-stimulating hormones, and cortisol). At the end of the study, all the animals were slaughtered, and the testes of all the animals were collected and evaluated for histopathology. Semen parameters in arsenic-treated bucks were significantly reduced (p < 0.05) compared with controls. Moreover, the levels of male hormones (testosterone, luteinizing hormone, and follicle-stimulating hormone) were significantly decreased in arsenic-treated animals, while cortisol was significantly increased with arsenic exposure. The histopathological lesions in the testes were present in the form of the loss of germinal epithelium and atrophy of Leydig cells. Supplementation of vitamin C however ameliorated the adverse effects of arsenic on semen quality and hormones. The histopathological lesions were also ameliorated due to vitamin C treatment. This study demonstrates that arsenic can adversely affect reproductive endpoints in Teddy goat bucks and supports the hypothesis that vitamin C is an effective treatment in arsenic-induced toxicosis. This study has high significance for Pakistan, as water contaminated with arsenic is a top health concern and is a recurring issue for both domestic animals and humans.

This paper seeks to answer an empirical question of whether clean biomass energy consumption lowers CO₂ emissions while controlling for technical innovation in eight selected countries from Africa for the 1980–2015 period. The countries which are chosen based on availability of data on biomass energy and technological innovation include Egypt, Algeria, South Africa, Mauritius, Kenya, Morocco, Tunisia, and Zambia. Applying pooled mean group, mean group, and dynamic fixed effect panel estimators, the results indicate that clean biomass energy use decreases CO₂ emission in the long run. But the effect of biomass energy consumption on CO₂ emission is insignificant in the short run. The findings imply that CO₂ emission can be reduced by increasing clean biomass energy in the energy mix of these countries. Similarly, environmental quality and economic growth can be achieved simultaneously by increasing the share of biomass energy in large-scale production process. Furthermore, the environmental Kuznets curve (EKC), which hypothesizes an inverted U-shaped relationship between CO₂ emission and economic growth, was validated in the long run. This suggests that the EKC pattern is only observed in the long run. Thus, as part of recommendation from this study, policy makers in these countries should formulate more policies that will enhance clean biomass energy production and its usage to substitute significant percentage of fossil fuel use in production process.

The environmental health of Buenaventura Bay, a highly impacted tropical estuary, is influenced by numerous human activities, including mining upstream. Large- and small-scale fishing plays an important role in the local economy, so we investigated the dynamic processes of bioaccumulation of mercury at basal trophic levels. Four samples were taken at each of the four locations in Buenaventura Bay during each of the four seasons of 2015. We measured the total mercury content (T-Hg, dry weight) in sediments and in muscle tissue across 17 macroinvertebrate species. The most abundant were the blue crab (C. arcuatus) and the mantis shrimp (S. aculeata aculeata). Blue crab showed an average muscle T-Hg value ​​exceeding the limit of 0.2 g·g⁻¹, which is the maximum T-Hg level suggested for food consumption by vulnerable humans and populations: pregnant women, children, and the community that feeds from this source of protein on a daily basis. It was found that, 6.22% of individuals exceeded the 0.5 g·g⁻¹ level, which is the maximum T-Hg level suggested for food consumption by the general population: the population that consumes it sporadically. Significantly high values ​​of T-Hg in blue crab and mantis shrimp occurred during low salinity conditions in the estuary, suggesting that Hg mainly originates from river runoff during the rainy season. Nevertheless, the biota-sediment accumulation factor (BSAF) was favored in high salinity, which could mean greater availability of Hg for higher levels of the estuarine food web in the dry season and in marine waters. In general, the T-Hg levels in some samples exceeded 0.2 g·g⁻¹. Therefore this pollutant must be monitored due to its biomagnification potential and as a threat to human health, especially that for the local population of fishermen and their families.

Lipases are hydrolytic enzymes owing much importance in industrial applications. These enzyme-based detergents are ecofriendly and produce a wastewater with low level of COD (chemical oxygen demand). In the present work, a novel halophilous, thermoalkaline, and detergent-tolerant lipase produced by a newly isolated Aeribacillus pallidus strain VP3 was studied. Considerable interest has been given to this lipase by the improvement of its catalytic activity through the optimization of the pH, the (C/N) ratio, and the inoculum size, using the response surface methodology based on the Box-Behnken design of experiments. A total of 16 experiments were conducted, and the optimized pH, (C/N) ratio, and inoculum size were 10, 1, and 0.3, respectively. The results of the analysis of variance (ANOVA) test indicated that the established model was significant (p value < 0.05). The optimization of the production conditions leads to 2.83-fold of increase in the catalytic activity calculated as the ratio of the activity obtained after optimization (68 U) and the initial activity before optimization (24 U). All in all, the lipase of Aeribacillus pallidus could be considered as a potential candidate to be incorporated in detergent formulations since it shows a good stability towards detergents and wash performance.

The purpose of this work was to produce iron nanoparticles (Fe-NP) by microbial pathway from anaerobic bacteria grown in anaerobic fluidized bed reactors (AnFBRs) that constitute a new stage of a waste-based biorefinery. Bioparticles from biological fluidized bed reactors from a biorefinery of organic fraction of municipal solid wastes (that produces hydrolysates rich in reducing sugars) were nanodecorated (embedded nanobioparticle or nanodecorated bioparticle, ENBP) by biological reduction of iron salts. Factors “origin of bioparticles” (either from hydrogenogenic or methanogenic fluidized bed reactor) and “type of iron precursor salt” (iron chloride or iron citrate) were explored. SEM and high-resolution transmission electron microscopy (HRTEM) showed amorphous distribution of nanoparticles (NP) on the bioparticles surface, although small structures that are nanoparticle-like could be seen in the SEM micrographs. Some agglomeration of NPs was confirmed by DLS. Average NP size was lower in general for NP in ENBP-M than ENBP-H according to HRTEM. The factors did not have a significant influence on the specific surface area of NPs, which was high and in the range 490 to 650 m² g⁻¹. Analysis by EDS displayed consistent iron concentration 60–65% iron in nanoparticles present in ENBP-M (bioparticles previously grown in methanogenic bioreactor), whereas the iron concentration in NPs present in ENBP-H (bioparticles previously grown in hydrogenogenic bioreactor) was more variable in a range from 8.5 to 62%, depending on the iron salt. X-ray diffraction patterns showed the typical peaks for magnetite at 35° (3 1 1), 43° (4 0 0), and 62° (4 0 0); moreover, siderite diffraction pattern was found at 26° (0 1 2), 38° (1 1 0), and 42° (1 1 3). Results of infrared analysis of ENBP in our work were congruent with presence of magnetite and occasionally siderite determined by XRD analysis as well as presence of both Fe⁺² and F⁺³ (and selected satellite signal peaks) observed by XPS. Our results on the ENBPs hold promise for water treatment, since iron NPs are commonly used in wastewater technologies that treat a wide variety of pollutants. Finally, the biological production of ENBP coupled to a biorefinery could become an environmentally friendly platform for nanomaterial biosynthesis as well as an additional source of revenues for a waste-based biorefinery.