Lodgepole pine (Pinus contorta) samples from three different provenances in Canada were investigated. All trees were the same age and had been grown in Latvia in similar conditions. Lodgepole pine of Summit Lake provenance had higher wood density (503 kg m-3) and a higher late wood content (46%) in comparison to Fort Nelson and Pink Mountain provenances. Investigation of chemical composition of wood indicated Summit Lake provenance wood as superior in cellulose content (49.7%), but no differences in lignin and extractives content were found between samples. Kraft pulp yield of Summit Lake samples (48%) was the highest, but the handsheet strength properties were relatively higher for pulp from Pink Mountain provenance pine wood.

Latvia uses average moisture content and density indexes obtained in Russia and European countries; though, these indexes are different, and there is no information about the most suitable one for conditions in Latvia. Research complex on Latvia’s industrially important tree species - Scots pine (Pinus sylvestris L.) stemwood and bark moisture and density changes, depending on influencing factors, is being conducted at Forestry Faculty of Latvian University of Agriculture. The research results on Scots pine, obtained during the year 2011 in the whole territory of Latvia, are outlined in this article. Wood and bark moisture and density were analyzed in 21 sampling plots, arranged in middle aged and cutting-aged reached forest stands, depending on tree age, cutting time and location place in the tree stem. The average moisture content of pine wood mostly depends on heartwood specific weight and age of the tree. With an increase of tree age, average wood moisture content value decreases from 111% (40-year-old trees) to 77% (145-year-old trees). Scots pine heartwood moisture content changes a little during the year: 30– 34% for 71 to 146-year-old trees; and 34-41% for 37–70-year-old trees. Sapwood moisture content is changes from 113% (in the summer) to 130% (in the winter), without any reference to the age of the tree. The average density of oven dry timber obtained from 71–146-year-old trees in the research is 0.501 g cmE-3, whereas in freshly cut condition – 0.848 g cmE-3.

The aim of this paper is to characterize and ascertain quality influencing factors of wood chips produced from forest residues in clear-cuts. The quality of food fuels varies according to the harvesting season, site characteristics and silvicultural treatment. For this study 89 piles of logging residues from clear-cuts located in Western part of Latvia were used. Piles were stored in different parts of clear-cut according to its direction against nearby stand. Piles of logging residues were pre dried and then chipped. A period of chipping and sample acquisition was from February to May of the year 2012. Results show that chips from forest residues can be successfully used for medium scale boilers. Chips with lower carbon content, calorific value, relative moisture and bulk density of wet chips can be produced in May. Location of the pile in centre and SE part of the clear cuts can decrease resulting ash content in wood chips.

Growing spruce and pine wood on land being out of active agricultural use is important for many European regions. The study of the qualitative characteristics of coniferous wood makes it possible to predict target indicators of the obtained raw materials. The influence of xylem structural elements on the density of spruce pine wood on the postagrogenic lands of the boreal zone of Russia was studied. The objects of the research were spruce-pine stands growing on old arable land in the Gatchina district of the Leningrad region. Depending on the share of the species, various anatomical indicators of the macro-structure of wood influence the formation of the spruce and pine wood density. For the spruce part of the forest stand, the width of the annual increase makes a greater contribution to the formation of indicators of wood density. For the pine part of the forest stand the density of the wood correlates with the proportion of late xylem. With a different proportion of the species, the influence of macro-structural elements on the density of wood changes. Conducted analysis of variance showed a significant effect of the forest stand composition on the anatomical macro-structure of spruce and pinewood.

The influence of coniferous stand composition on the density of pine (Pinus sylvestris) and spruce (Picea abies) wood is considered in this work. Processing of a large quantitative material of wood cores with the use of the ANOVA and rank analysis made it possible to reveal the influence on the macrostructure of wood of the quantitative representation of pine and spruce in the stand. In the pine part of the stand, the correlation of the wood density with the zones of early and late xylem is weak or medium. There is no wood density correlation with the width of the annual ring for stands with different shares of pine. In pine-prevailing stands with a share of pine 80% – 100%, there is a weak but reliably straight relationship between wood density and the size of late wood zone and an inverse relationship with early zone of xylem. For forest stands with a smaller part of pine participation, the relationship between these indicators is medium and reliable. For spruce, we observe a close relationship between the density of xylem and the parameters of its macrostructure in all its variants of participation in mixed coniferous plantations. In most of the studied mixed stands, the density of wood in spruce is not significantly differentiated and more homogeneous.