ABSTRACT Eggplant is a vegetable considered as moderately sensitive to salinity, and its production is affected by water deficit in the soil, mainly in the reproductive phase of the crop. The objective of this study was to evaluate the use of irrigation with brackish water using continuous drip and pulse in production, water consumption, water use efficiency, and soil salinization. The experimental design was in randomized blocks, in a 4 × 4 factorial scheme, with five replicates, totaling 80 plots. The treatments consisted of four forms of water application, continuous drip, and pulse throughout the cycle; continuous drip in the vegetative phase and pulse in the reproductive phase, and pulse in the vegetative phase and drip in the reproductive phase and four levels of irrigation water salinity - ECw (0.3; 1.5; 3.0; 4.5 dS m−1). The inversion of irrigation treatments occurred 65 days after transplanting. Increase in water salinity from 0.3 to 4.5 dS m−1, the total production (-11.96%), fruit length (-5.05%), and water use efficiency (-7.01%) reduced while there was no significant effect for the forms of water application and interaction between the studied factors. Pulse irrigation provided greater water savings and resulted in higher electrical conductivity in the soil saturation extract. The efficiency of water use did not show statistical difference when continuous drip or pulse irrigation was used throughout the cycle.

ABSTRACT Triploid watermelon is highly appreciated by the most demanding markets, and due to its small size, it is ideal for consumption by small families. With the growth in areas cultivated with seedless watermelon worldwide, there is a demand for the development of tetraploid germplasm to obtain triploid hybrids with better agronomic performance. This study performed two tests to induce polyploidy in the powdery mildew–resistant line developed by Embrapa Semi-Arid, LDRO, under different colchicine concentrations and application methods. In Experiment 1, the seeds were treated with colchicine (0.0%, 0.1%, and 0.2%) for 24 h and 48 h. In Experiment 2, 0.2% colchicine was applied by different methods: (a) directly on the seed (MDS) with and without scarification, (b) on seeds with radicle emission (MER), (c) at the insertion point between the hypocotyl and the root (MIHR), (d) at the seedling apex (MAP), and (e) in the inverted hypocotyl (MHI). Chromosome count (cytogenetic analysis), number of chloroplasts per pair of guard cells, number of stomata, seedling height, and hypocotyl diameter were measured. In the LDRO line, chromosomal duplication occurred in some plant cells, but it was not possible to obtain 100% tetraploid plants. Colchicine (0.2%) for 48 h without mechanical scarification induced chromosomal duplication in watermelon. The analysis of the number of chloroplasts identified the level of ploidy early, reducing the number of plants needed to be evaluated by cytogenetics, which allowed us to more accurately identify the different levels of ploidy of the plant.

ABSTRACT Cowpea [Vigna unguiculata (L.) Walp.] is an important socioeconomic crop in Brazil, mainly in the Northeast and more recently in the Midwest of Brazil. Charcoal rot caused by Macrophomina phaseolina (Tassi) Goid, is an important disease in semiarid regions, where edaphoclimatic conditions are favorable to the development of disease. The aim of this study was to evaluate the response of 100 cowpea lines to two isolates of M. phaseolina. The experiments were conducted in a completely randomized design, with five replications (two plants per pot). The main variables evaluated were lesion length and relative growth compared to control (RGCC). Among the evaluated accessions, 15% of the lines were resistant to isolate 59 and 11% of the lines were resistant to isolate CMM 2106 of M. phaseolina. Therefore, these accessions can be used as a source of resistance to M. phaseolina by farmers directly as new cultivars or in future hybridizations of cowpea genetic breeding programs.

ABSTRACT The adequacy of spraying technology in the control of Asian rust to factors related to soybean cultivars and fungicide type is fundamental for the efficiency in the control of this disease. In this context, the objective was to evaluate the chemical control of Asian soybean rust and the deposition of the fungicide applied in the crop, according to different volumes and spray nozzles. Four field experiments were set up during the 2014/2015 season, each carried out with one soybean cultivar, using: NA 5909 RR®, NS 7237 IPRO®, BMX Potência RR® and W 712 RR®. The experimental design was randomized blocks in a 2x2x2 factorial arrangement, with four replications. The first factor corresponded to the use of fungicides: [pyraclostrobin + epoxiconazole] and [pyraclostrobin + epoxiconazole] + mancozeb; the second factor, types of spray nozzle: double and triple fan; and the last factor, application volume: 60 and 120 L ha-1. The highest application volume resulted in greater deposition of droplets in the canopy of the plants, regardless of the fungicide, type of spray nozzle and cultivar. The association of fungicides [pyraclostrobin + epoxiconazole] + mancozeb showed greater efficacy in controlling rust, regardless of the type of spray nozzle and the volume applied when compared to [pyraclostrobin + epoxiconazole]. The highest volume of application promoted less disease evolution in the cultivars NA 5909 RR®, NS 7237 IPRO® and BMX Potência RR®. The yields of the cultivar were higher when the combination [pyraclostrobin + epoxiconazole] + mancozeb was used.

ABSTRACT Green manuring with spontaneous species from the Caatinga has emerged as a viable alternative to supply vegetables with nutrients and thus increase their productivity. This study aimed to evaluate and estimate the maximum physical and economic efficiencies of coriander productive characteristics as a function of equitable biomass amounts of hairy woodrose [Merremia aegyptia (L.) Urban] and roostertree [Calotropis procera (Aiton) W. T.] in different cropping seasons. The experimental design was a randomized complete block with five treatments and five replicates. The treatments consisted of green manure amounts (16, 29, 42, 55, and 68 t ha-1 on a dry basis). A treatment without fertilization (control) was used in each experiment. The maximum agronomic efficiency (coriander green mass yield) was possible with the incorporation of equitable amounts of 49.56 t ha-1 of M. aegyptia and C. procera biomass, respectively. The maximum economic efficiency of production (evaluated in terms of net income and rate of return) of this leafy vegetable was achieved with the addition to the soil of 42.68 and 41.64 t ha-1 of biomass of these green manures, respectively. The net income and the rate of return optimized for these amounts of green manures were 30,243.92 R$ ha-1 and 2.79 reais for each real invested in the production of this leafy vegetable. The use of biomass from Merremia aegyptia and Calotropis procera from the Caatinga biome proved to be a viable technology for producers who practice the cultivation of coriander when monocropping in a semiarid environment.

ABSTRACT Passion fruit production has become an attractive activity due to its social and economic benefits, given the rapid economic return and well-distributed income over most of the year. From this perspective, this study aimed to evaluate the technical and economic indicators of yellow passion fruit cultivation by combining irrigation, protected cultivation, and pollination. The experimental design was in randomized blocks set up in split plots (2 x 2 x 2), with eight treatments and four replicates containing four plants per experimental unit. The protected environment was installed on the upper part of each trellis and consisted of 100 m transparent plastic film as cover material. Irrigation was performed using a micro-sprinkler system, and pollination was either manual or natural (entomophilous). The following parameters were evaluated: commercial yield - estimated for one hectare considering the mass of marketable fruits produced in the plot (30 m2); production cost - capital depreciation, input prices, and labor used in cultivation; economic indicators - profitability index, family labor remuneration, profitability, net income, benefit/cost ratio, and fixed, variable, and total costs. The results show that artificial pollination increased the yield and provided a 41% higher profitability rate than natural pollination; supplemental irrigation, compared to rainfed cultivation, has no positive effects on profitability indices; protected cultivation increases the total cost and does not 0increase the yield; organic passion fruit production provides profitability indices ranging from 60% to 70%.

ABSTRACT Watermelon has great economic relevance, but edaphoclimatic factors and inadequate management have favored the salinization of the water used for irrigation, which is a limiting factor for the growth and production of the crop. However, it is considered that the use of growth regulators belonging to the group of cytokinins and auxins may contribute to the development and yield of crops, even under adverse conditions such as salinity. Thus, the objective was to evaluate the influence of cytokinin and auxin proportions on the growth and quality of watermelon irrigated with saline water. The experimental design was completely randomized, with four replicates and 5 x 2 factorial, referring to five proportions of growth regulators (0/100; 25/75; 50/50; 75/25 and 100/0%) corresponding to concentrations of 1.0 and 10.0 mg L−1 of forchlorfenuron (CPPU)/ indoleacetic acid (IAA), and two salinity levels, one composed of water without adding salt (0.3 dS m-1) and the other with 2.0 dS m−1 electrical conductivity. The proportions of cytokinin and auxin influenced the growth and quality of watermelon subjected to salinity in irrigation water. The 25/75% (CPPU/IAA) proportion favored smaller decreases in leaf area and total dry mass under a saline condition of 2.0 dS m−1. For fresh and dry fruit mass, the 75/25% (CPPU/IAA) proportion favored smaller reductions. Fruit firmness and soluble solids were favored by the proportions 25/75 and 50/50% (CPPU/IAA) at EC of 2.0 dS m−1. Acidity was only influenced by the proportion of 50/50% (CPPU/IAA) between the electrical conductivity levels.

ABSTRACT The objective of this work was to evaluate the agronomic performance, cooking time and postharvest conservation of roots of sweet cassava clones, to select those superior to the Manteiga variety control, in the Baixo Sul region of Bahia state. A randomized block design in split plot scheme, with three replications was used. Eleven genotypes were evaluated at 10 and 12 months after planting. Considering the mean of two harvests, BRS Kiriris and Saracura showed total root yield (39.85 and 33.91 t ha−1, respectively) and commercial root yield (26.54 and 26.71 t ha−1) that are higher compared to Manteiga (total root yield: 28.06 t ha−1, commercial root yield: 16.95 t ha−1). However, both had cooking time (26.76 and 28.30 min, respectively) higher than that of Manteiga (23.89 min), and BRS Kiriris was unstable regarding the cooking percentage between 10 (91.67%) and 12 months (50%). BRS Aipim Brasil, 2003 14-11, BRS Kiriris, Eucalipto, Saracura and Manteiga were more tolerant to postharvest physiological deterioration. Although some of the evaluated clones presented good performance in the evaluated traits, by analyzing the set of traits, none of them shows sufficient superiority to be indicated as a potential substitute for Manteiga, grown in the Baixo Sul region of Bahia state.

ABSTRACT The use of resistant cultivars is an efficient and recommended method for the management of leafminers, which are the main phytosanitary problem in melons. The objectives of this study were to identify the sources of resistance to the leafminer in yellow melon accessions and to determine the resistance inheritance in acession AM-RT. Two field experiments were conducted in the municipalities of Baraúna, RN and Icapuí, CE, Brazil, to identify the sources of resistance. The design adopted was completely randomized blocks with 22 treatments and four replications. In this evaluation, the number of mines per leaf was quantified. The heterogeneity of the studied materials allowed for the identification of the accessions AM-RT and AM-TM as sources of resistance, considering that they revealed zero mines in the two evaluation environments. The accession AM-RT was selected and used to obtain the S1 population (by self-fertilization), S1:2 population derived from S1, and crossing between AM-RT and ‘Goldex’, which were evaluated in a third laboratory trial to determine the genetic control of resistance in that material. By the segregation pattern of the populations S1, S1:2, and the crossing (AM-RT and ‘Goldex’) and the estimation of the chi-squared (χ2) values, which were 1.33, 3.14, and 0.36, respectively, it was determined that the inheritance of resistance was controlled by only one gene with complete dominance. Therefore, in this study, two sources of resistance to the leafminer were identified, and resistance was conditioned by a gene with complete dominance in the accession ‘AM-RT’.

ABSTRACT Image analysis combined with machine learning models can be an excellent tool for classification of fava (Phaseolus lunatus L.) genotypes and is a low-cost system. Fava is grown by family farmers, mainly, in the Northeast and South regions of Brazil, presenting economic and social importance. Evaluations to gather information on qualitative and quantitative characters of seeds enable the description and distinction of genotypes, allowing the evaluation of variability of plant species, which is essential in breeding programs. The use of image analysis is a fast and economic tool for obtaining large quantity of information. Machine learning techniques have been developed and implemented in the agricultural sector due to technological advances and increasing use of artificial intelligence, which enables the automatization of several processes. In this context, the objective of this work was to evaluate different machine learning models to classify fava genotypes, using data obtained through image analysis. Images of fava seeds were captured using a table scanner (HP Scanjet 2004), set to true color mode, arranged upside down inside of an aluminum box fully closed during the capture of the images for an adequate illumination and prevention of environmental noises. The K-Nearest Neighbor, Naive Bayes, Linear Discriminant Analysis, Support Vector Machine, Gradient Boosting, Bootstrap Aggregating, Classification and Regression Trees, Random Forest, and C50 models were used for the study. Linear Discriminant Analysis was the model that presented the highest efficiency for classifying the genotypes, with an accuracy of 90%.