In this paper, multilayer pectin-beeswax/colophony-pectin (P-BC-P) films including different proportions of beeswax/colophony mixtures were prepared in order to reduce the water vapor permeability. FTIR, XRD, DSC, polarized light microscopy (PLM), and water vapor permeation assays were performed. Characterization techniques showed (i) polar interactions between beeswax and colophony at the amorphous phase, (ii) changes in beeswax crystalline phase from sponge-like to needle-like structure, and (iii) formation of a eutectic mixture at BC3 70/30 ratio which guides the epitaxial crystallization of beeswax. Pure pectin films showed low resistance to the water vapor permeation (361 × 10⁻¹³ g m m⁻² s⁻¹ Pa⁻¹), while multilayer films showed major control over the transport process. P-BC3-P showed one of the lowest water vapor permeability (WVP) values (56 × 10⁻¹³ g m m⁻² s⁻¹ Pa⁻¹) and the closest WVP value to that of polyethylene films (LDPE 5.8 × 10⁻¹³ g m m⁻² s⁻¹ Pa⁻¹). This result was attributed to the ordered crystalline structure reached by the epitaxial crystallization of beeswax within the hydrophobic phase.

Engineering the interface of oil-in-water emulsion droplets with biopolymers that modify its permeability could provide a novel technique to improve flavour retention in dry powders. The objective of this study was to determine if volatile compounds were more retained in dry emulsions stabilized by pea protein isolate (PPI)/pectin complex than that stabilized by PPI alone. The retention of ethyl esters during spray-drying increased with decreasing volatility of the encapsulated compound and ranged from 28% to 40%. The addition of pectin to feed emulsions was quite effective in markedly improving the retention of the three studied flavour compounds. In our previous work (Gharsallaoui et al., 2010), we showed that pectin was able to improve physical integrity of emulsion oil droplets during spray-drying. However, the pectin positive effect on both the droplet stability and the flavour retention at the time of spray-drying can also be explained by a protein molecular structure protective effect. Indeed, the obtained FTIR results showed that pectin was able to preserve the β-sheet secondary structure of pea protein when pea globulins/pectin complexes are heated. The study of the release characteristics of a flavour compound from dried powders showed that pectin addition did not affect the release profile mainly accomplished by the diffusion mechanism.

The potential isolation of bio-active polysaccharides from bay tree pruning waste was studied using sequential subcritical water extraction using different time-temperature combinations. The extracted polysaccharides were highly enriched in pectins while preserving their high molecular mass (10–100 kDa), presenting ideal properties for its application as additive in food packaging. Pectin-enriched chitosan films were prepared, improving the optical properties (≥95% UV-light barrier capacity), antioxidant capacity (˃95% radical scavenging activity) and water vapor permeability (≤14 g·Pa⁻¹·s⁻¹·m⁻¹·10⁻⁷) in comparison with neat chitosan-based films. Furthermore, the antimicrobial activity of chitosan was maintained in the hybrid films. Addition of 10% of pectins improved mechanical properties, increasing the Young's modulus 12%, and the stress resistance in 51%. The application of pectin-rich fractions from bay tree pruning waste as an additive in active food packaging applications, with triple action as antioxidant, barrier, and antimicrobial has been demonstrated.

Food and beverages enrichment with water-insoluble health-promoting nutraceuticals is important, but technologically challenging. Sugar beet pectin (SBP) is a natural dietary fiber with high emulsifying capacity. However, its potential as a natural encapsulator of hydrophobic nutraceuticals for beverage enrichment, has hardly been explored. Curcumin is a potent antioxidant with numerous attributed health benefits, but very low aqueous-solubility. We herein explored SBP as a carrier for solubilization and protection of curcumin (CUR). Using spectrofluorimetry, the CUR-SBP binding constant determined was (6.74 ± 0.5) ∙ 10⁵M⁻¹. As CUR:SBP molar ratio increased from 14:1 to 140:1, CUR encapsulation capacity increased from 14.5 ± 0.8 to 127.4 ± 0.4 mg CUR/gSBP, and encapsulation efficiency moderately decreased from ~100% to 86 ± 7%. The encapsulation in SBP dramatically decreased CUR particle size, from >17 μm to <0.5 μm, in average, and conferred substantial protection to CUR during simulated shelf-life, decreasing the decay rate constant ~7 fold. Therefore, SBP is a potent natural encapsulator for hydrophobic nutraceuticals for food and even clear beverage enrichment.

In this study, oil-in-water emulsions made of medium-chain triglycerides (MCT), mucilage from Dioscorea opposita (DOM), and food-grade polysaccharides (guar gum [GG], xanthan gum [XG] and pectin [Pec]) were prepared using high-pressure homogenisation. The droplet size distributions, microstructure, turbidity, interfacial tension, creaming index, and stability of emulsions were investigated and compared with those of DOM, GG, XG and Pec. The results showed that 0.4 wt% food-grade polysaccharides (GG, XG, and Pec) with 2 wt% DOM contributed more to the stability of the emulsion during storage. In particular, low concentrations of pectin and DOM emulsions presented smaller droplet size distribution, in the range of 86.34–111.30 nm. Hence, DOM has synergistic effects with food-grade polysaccharides, which could improve the stability of emulsions, suggesting that mucilage from Dioscorea opposita has good potential for use as a natural emulsifier.