In this study, the capability of a natural surfactant, lecithin, and the influence of ionic strength, pH, and temperature on some properties of a food grade microemulsion system were evaluated. For this purpose, the pseudoternary phase diagrams of canola oil/lecithin:n-propanol/water microemulsions in the presence of different salts (NaCl and CaCl2), ionic strengths, pHs, and temperatures were constructed. Our findings showed that the presence of salts slightly increased the W/O areas on the phase diagrams, whereas pH variation was not effective on the microemulsion formation. The expansion of microemulsion areas with temperature indicated the greater triglycerides solubilization capacity of lecithin based microemulsions at higher temperatures. These findings revealed the efficiency of lecithin-based microemulsion system for solubilization of triglycerides which can potentially be used for extraction of edible vegetable oils particularly canola oil.

Microemulsions based on five-component mixtures for food applications and improved oil solubilization have been studied. The compositions included water, oil phase [such as R(+)-limonene and medium-chain triglycerides (MCT)], short-chain alcohols (such as ethanol), polyols (propylene glycol and glycerol), and several surfactants and their corresponding mixtures (nonionic, such as ethoxylated sorbitan esters, polyglycerol esters, sugar ester, and anionic, such as phosphatidylcholine). The phase behavior of these systems is discussed with respect to the influence of polyols and short-chain alcohols on the degree of solubilization of oils in the aqueous phase. The alcohol and polyols modify the interfacial spontaneous curvature and the flexibility of the surfactant film, enhancing the oil solubilization capacity of the microemulsions. The solubilization of R(+)-limonene was dramatically improved in the presence of the alcohol and polyols, whereas the improvement of solubilization for triglycerides containing MCT was less pronounced. In some systems high oil solubilization was achieved, and some of them can be easily diluted to infinity both with the aqueous phase and with the oil phase. Viscosity measurements along selected dilution lines [characterized by a single continuous microemulsion region starting from a pseudo binary solution (surfactant/oil phase) to the microemulsion (water/polyol corner)] indicate that at a certain composition the system inverts from a W/O to an O/W microemulsion.

An integrated two-phase AD with acidogenic off-gas diversion from a leach bed reactor to an upflow anaerobic sludge blanket was developed for improving methane production. However, this system had its own technical limitation such as mass transfer efficiency for solid-state treatment. In order to optimize the mass transfer in this two phase AD system, leachate recirculation with various water replacement rates regulating the total solids contents (TS) at 12.5%, 15%, and 17.5% was aim to investigate its effect on methane generation. The solubilization of food waste was increased with decreasing TS content, while the enzymatic hydrolysis showed the opposite trend. A TS contents of 15% presented the best acidogenic performance with the highest hydrogen yield of 30.3 L H₂/kg VSₐddₑd, which subsequently resulted in the highest methane production. The present study provides an easy approach to enhance food waste degradation in acidogenic phase and energy conversion in methanogenic phase simultaneously.

Curcumin was extracted from Curcuma Longa employing a green, bio-based, and food-agreed surfactant-free microemulsion (SFME) consisting of water, ethanol, and triacetin. Concerning the high solubility of curcumin in the examined ternary mixtures, it was attempted to produce highly concentrated tinctures of up to a total of ~130 mg/mL curcuminoids in the solvent by repeatedly extracting fresh rhizomes in the same extraction mixture. The amount of water had a significant influence on the number of cycles that could be performed as well as on the extraction of the different curcuminoids. In addition, the purity of single extracts was enhanced to 94% by investigating several purification steps, e.g. vacuum distillation and lyophilization. Through purification before extraction, the water insoluble curcumin extract could be solubilized indefinitely in an aqueous environment. Additional stability tests showed that solutions of curcumin can be stable up to five months when concealed from natural light.

Microaeration has been used conventionally for the desulphurization of biogas, and recently it was shown to be an alternative pretreatment to enhance hydrolysis of the anaerobic digestion (AD) process. Previous studies on microaeration pretreatment were limited to the study of substrates with complex organic matter, while little has been reported on its effect on substrates with higher biodegradability such as brown water and food waste. Due to the lack of consistent microaeration intensities, previous studies were not comparable and thus inconclusive in proving the effectiveness of microaeration to the overall AD process. In this study, the role of microaeration pretreatment in the anaerobic co-digestion of brown water and food waste was evaluated in batch-tests. After a 4-day pretreatment with 37.5mL-O2/LR-d added to the liquid phase of the reactor, the methane production of substrates were monitored in anaerobic conditions over the next 40days. The added oxygen was consumed fully by facultative microorganisms and a reducing environment for organic matter degradation was maintained. Other than higher COD solubilization, microaeration pretreatment led to greater VFA accumulation and the conversion of other short chain fatty acids to acetate. This could be due to enhanced activities of hydrolytic and acidogenic bacteria and the degradation of slowly biodegradable compounds under microaerobic conditions. This study also found that the nature of inoculum influenced the effects of microaeration as a 21% and 10% increase in methane yield was observed when pretreatment was applied to inoculated substrates, and substrates without inoculum, respectively.

Food and beverages enrichment with water-insoluble health-promoting nutraceuticals is important, but technologically challenging. Sugar beet pectin (SBP) is a natural dietary fiber with high emulsifying capacity. However, its potential as a natural encapsulator of hydrophobic nutraceuticals for beverage enrichment, has hardly been explored. Curcumin is a potent antioxidant with numerous attributed health benefits, but very low aqueous-solubility. We herein explored SBP as a carrier for solubilization and protection of curcumin (CUR). Using spectrofluorimetry, the CUR-SBP binding constant determined was (6.74 ± 0.5) ∙ 10⁵M⁻¹. As CUR:SBP molar ratio increased from 14:1 to 140:1, CUR encapsulation capacity increased from 14.5 ± 0.8 to 127.4 ± 0.4 mg CUR/gSBP, and encapsulation efficiency moderately decreased from ~100% to 86 ± 7%. The encapsulation in SBP dramatically decreased CUR particle size, from >17 μm to <0.5 μm, in average, and conferred substantial protection to CUR during simulated shelf-life, decreasing the decay rate constant ~7 fold. Therefore, SBP is a potent natural encapsulator for hydrophobic nutraceuticals for food and even clear beverage enrichment.

The objective of this work was to study the microbial community and reactor performance for the anaerobic co-digestion of brown water and food waste in single- and two-phase continuously stirred tank reactors (CSTRs). Bacterial and archaeal communities were analyzed after 150days of reactor operation. As compared to single-phase CSTR, methane production in two-phase CSTR was found to be 23% higher. This was likely due to greater extent of solubilization and acidification observed in the latter. These findings could be attributed to the predominance of Firmicutes and greater bacterial diversity in two-phase CSTR, and the lack of Firmicutes in single-phase CSTR. Methanosaeta was predominant in both CSTRs and this correlated to low levels of acetate in their effluent. Insights gained from this study would enhance the understanding of microorganisms involved in co-digestion of brown water and food waste as well as the complex biochemical interactions promoting digester stability and performance.